main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp2951dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp2951dr: viewers · Ray
lp2951dr-etched.fit.json lp2951dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2951dr-etched.glb lp2951dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2951dr-etched.step lp2951dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2951dr-hero.glb Publish 0.1.1 · Ray
lp2951dr-hero.overlay.json Publish 0.1.1 · Ray
lp2951dr.glb Publish 0.1.0 · Ray
lp2951dr.kicad_mod Publish 0.1.0 · Ray
lp2951dr.kicad_sym Publish 0.1.0 · Ray
lp2951dr.lbr Publish 0.1.0 · Ray
lp2951dr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lp2951dr · Ray

LP2951DR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

LP2951DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT output Regulated output voltage pin; capacitor required to GND for stability (minimum 1µF effective, nominal 2.2µF, maximum 100µF) with ESR range 0-2Ω for new chip.
2 SENSE input Senses output voltage; connect to OUTPUT for fixed output mode (with FEEDBACK tied to VTAP), leave floating for adjustable output.
3 SHUTDOWN input Active-high shutdown control input; disables regulator when voltage > 2V, enables when voltage < 0.7V.
4 GND power_in Ground reference.
5 ERROR output Active-low open-drain error output; asserts low when output voltage drops 6% (typical) below nominal value, with threshold 75-95 mV above VREF.
6 VTAP input Internal resistor divider tap; connect to FEEDBACK for fixed output mode, leave floating for adjustable output.
7 FEEDBACK input Output voltage feedback input; for fixed output connect to VTAP, for adjustable output connect to external resistor divider network (VREF 1.189-1.211V for new chip).
8 INPUT power_in Input supply voltage pin operating range 2-30V; 1µF or larger capacitor to GND recommended to reduce source impedance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LP2951DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lp2951dr-etched.step / lp2951dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2951dr.step / lp2951dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 04f02333dfa5fad2, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF