component
LP2951-30DRGR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP2951-30DRGR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-8-EP(3x3)
LP2951-30DRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | power_out | Regulated output voltage; requires minimum 1µF capacitor to GND for stability, nominal 1µF-100µF ceramic recommended. |
| 2 | SENSE | input | Output voltage sense input; connects to OUTPUT for fixed output when FEEDBACK connects to VTAP, must remain open for adjustable output. |
| 3 | SHUTDOWN | input | High-level-active shutdown control input; enables device below 0.7V, disables above 2V. |
| 4 | GND | power_in | Ground, reference potential. |
| 5 | ERROR | output | Open-drain active-low fault output; asserts low when VOUT drops 6% below nominal value. |
| 6 | VTAP | input | Voltage tap for fixed output option; connects to FEEDBACK for fixed output, must remain open for adjustable output. |
| 7 | FEEDBACK | input | Feedback input for output voltage regulation; connects to VTAP for fixed output (with OUTPUT to SENSE) or to external resistor divider for adjustable output. |
| 8 | INPUT | power_in | Input power supply pin VIN 2V-30V; minimum 1µF capacitor to GND recommended for stability. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LP2951-30DRGR - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lp2951-30drgr-etched.step/lp2951-30drgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2951-30drgr.step/lp2951-30drgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
d245e8d4bbb0ca93, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).