main
Ray Publish 0.1.0 38b10ea

LP2951-03YM-TR

Microchip Tech · Linear Voltage Regulators (LDO) · SOIC-8

LP2951-03YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Regulated voltage output, guaranteed 100 mA output, and requires a 1.0 μF (or greater) capacitor to ground to prevent oscillation.
2 SENSE input Output voltage sense input; tie to pin 1 (VOUT) for 5V output using the internal divider.
3 SHDN input Logic-compatible shutdown input that switches the regulator on and off.
4 GND power_in Ground terminal.
5 ERROR output Open-collector error output that goes low when the output is more than about 5% out of regulation, requires an external pull-up of 100 kΩ to 1 MΩ, and can sink 400 μA.
6 5V TAP passive Internal resistor divider tap for 5V output; tie to pin 7 (FB) for 5V output.
7 FB input Voltage feedback input with nominal 1.235 V reference and 20 nA nominal bias current; output is programmable from 1.235 V to 30 V with external resistors.
8 VIN power_in Unregulated supply voltage input; a 0.1 μF capacitor to ground is recommended if there is more than 10 inches of wire to the AC filter capacitor or a battery is used.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 4.95 5 5.05 V TJ = 25°C, LP2951-03 (±1%) 5
Output voltage VOUT 4.925 5.075 V -25°C ≤ TJ ≤ +85°C, LP2951-03 (±1%) 6
Output voltage over full temperature range VOUT 4.9 5.1 V -40°C to +125°C, LP2951-03 (±1%) 6
Output voltage over load variation VOUT 4.88 5.12 V LP2951-03 (±1%), 100 μA ≤ IL ≤ 100 mA, TJ ≤ TJ(max) 6
Output voltage temperature coefficient 50 150 ppm/°C LP2951-03 (±1%), Note 1 6
Line regulation 0.04 0.2 % LP2951-03 (±1%), Note 2, 3 7
Line regulation 0.4 % LP2951-03 (±1%), Note 2, 3 7
Load regulation 0.1 0.2 % LP2951-03 (±1%), Note 2, 100 μA ≤ IL ≤ 100 mA 7
Load regulation 0.3 % LP2951-03 (±1%), Note 2, 100 μA ≤ IL ≤ 100 mA 7
Dropout voltage 50 80 mV Note 4, IL = 100 μA 7
Dropout voltage 150 mV Note 4, IL = 100 μA 7
Dropout voltage 380 450 mV Note 4, IL = 100 mA 7
Dropout voltage 600 mV Note 4, IL = 100 mA 7
Ground current 100 150 μA IL = 100 μA 7
Ground current 200 μA IL = 100 μA 7
Ground current 8 12 mA IL = 100 mA 7
Ground current 14 mA IL = 100 mA 7
Dropout current 180 250 μA VIN = 4.5V, IL = 100 μA 8
Current limit 160 220 mA VOUT = 0V 8
Thermal regulation 0.05 0.2 %/W Note 5 8
Reference voltage VREF 1.21 1.235 1.26 V LP2951-03 (±1%) 8
Reference voltage VREF 1.2 1.27 V LP2951-03 (±1%) 8
Reference voltage VREF 1.185 1.285 V LP2951-03 (±1%), Note 7 8
Feedback bias current 20 40 nA 9
Feedback bias current 60 nA 9
Output leakage current 0.01 1 μA 9
Output leakage current 2 μA VOH = 30V 9
Output low voltage (flag) 150 250 mV VIN = 4.5V, IOL = 200μA 9
Output low voltage (flag) 400 mV VIN = 4.5V, IOL = 200μA 9
Upper threshold voltage 40 60 mV Note 6 9
Lower threshold voltage 75 95 mV Note 6 9
Lower threshold voltage 140 mV Note 6 9
Input logic voltage Low 0.7 V LP2951-03 (±1%) 10
Input logic voltage High 2 V LP2951-03 (±1%) 10
Shutdown input current 30 50 μA VSHUTDOWN = 2.4V 11
Shutdown input current 100 μA VSHUTDOWN = 2.4V 11
Shutdown input current 450 600 μA VSHUTDOWN = 30V 11
Shutdown input current 700 μA VSHUTDOWN = 30V 11
Regulator output current in shutdown 3 10 μA 11
Regulator output current in shutdown 20 μA Note 9 11
Junction operating temperature TJ -40 125 °C 12
Storage temperature range TA -65 125 °C 12
Storage temperature -65 150 °C 5
Input supply voltage -0.3 30 V 5
Feedback input voltage -1.5 30 V Note 2, 3 5
Shutdown input voltage -0.3 30 V Note 2 5
Error comparator output voltage -0.3 30 V Note 2 5
Thermal resistance junction-to-ambient, SOIC package JA 160 °C/W Typically mounting on a 1'' square copper-clad FR4 circuit board 12
Thermal resistance junction-to-case, SOIC package JC 25 °C/W 12

CAD (KiCad official)

  • Symbol: LP2951-03YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lp2951-03ym-tr-etched.step / lp2951-03ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2951-03ym-tr.step / lp2951-03ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 9310d226e59ae920, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF