main
Ray
Publish 0.1.0
d85c169
LP2951-02YM
Microchip Tech · Power Management Specialized - PMIC · SOIC-8
LP2951-02YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated voltage output; requires at least 1.0 μF capacitor to ground for stability, and is tied to SENSE (pin 2) for a 5V pin-strapped output. |
| 2 | SENSE | input | Output voltage sense input, tied to VOUT (pin 1) for 5V pin-strapped operation. |
| 3 | SHDN | input | Logic-compatible shutdown input that switches the regulator on and off. |
| 4 | GND | power_in | Ground terminal. |
| 5 | ERROR | output | Open-collector error flag output that goes low when the output falls more than about 5% out of regulation, rated to sink 400 μA and needing an external pull-up resistor (100 kΩ to 1 MΩ suggested). |
| 6 | 5V TAP | passive | Internal resistor divider tap for 5V output, tied to FB (pin 7) for a 5V output. |
| 7 | FB | input | Voltage feedback input with nominal 20 nA bias current, tied to 5V TAP for 5V output or to an external resistor divider for 1.235V to 30V output. |
| 8 | VIN | power_in | Unregulated supply voltage input; a 0.1 μF capacitor to ground is advised if more than 10 inches of wire lies between it and the filter capacitor or if a battery is used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.975 | 5 | 5.025 | V | TJ = 25°C, LP2951-02 (±0.5%) | 5 |
| Output Voltage | VOUT | 4.95 | 5.05 | V | -25°C ≤ TJ ≤ +85°C, LP2951-02 (±0.5%) | 6 | |
| Output Voltage Over Full Temperature Range | VOUT | 4.94 | 5.06 | V | -40°C to +125°C, LP2951-02 (±0.5%) | 6 | |
| Output Voltage Over Load Variation | VOUT | 4.93 | 5.07 | V | LP2951-02 (±0.5%), 100 μA ≤ IL ≤ 100 mA, TJ ≤ TJ(max) | 6 | |
| Output Voltage Temperature Coefficient | 20 | 100 | ppm/°C | LP2951-02 (±0.5%), Note 1 | 6 | ||
| Line Regulation | 0.03 | 0.1 | % | LP2951-02 (±0.5%), Note 2, 3 | 7 | ||
| Line Regulation (over temperature) | 0.2 | % | LP2951-02 (±0.5%), Note 2, 3 | 7 | |||
| Load Regulation | 0.04 | 0.1 | % | LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA | 7 | ||
| Load Regulation (over temperature) | 0.2 | % | LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA | 7 | |||
| Dropout Voltage | 50 | 80 | mV | Note 4, IL = 100 μA | 7 | ||
| Dropout Voltage (over temperature) | 150 | mV | Note 4, IL = 100 μA | 7 | |||
| Dropout Voltage | 380 | 450 | mV | Note 4, IL = 100 mA | 7 | ||
| Dropout Voltage (over temperature) | 600 | mV | Note 4, IL = 100 mA | 7 | |||
| Ground Current | 100 | 150 | μA | IL = 100 μA | 7 | ||
| Ground Current (over temperature) | 200 | μA | IL = 100 μA | 7 | |||
| Ground Current | 8 | 12 | mA | IL = 100 mA | 7 | ||
| Ground Current (over temperature) | 14 | mA | IL = 100 mA | 7 | |||
| Dropout Current | 180 | 250 | μA | VIN = 4.5V, IL = 100 μA | 8 | ||
| Dropout Current (over temperature) | 310 | μA | VIN = 4.5V, IL = 100 μA | 8 | |||
| Current Limit | 160 | 220 | mA | VOUT = 0V | 8 | ||
| Thermal Regulation | 0.05 | 0.2 | %/W | Note 5 | 8 | ||
| Reference Voltage | 1.22 | 1.235 | 1.25 | V | LP2951-02 (±0.5%) | 8 | |
| Reference Voltage (over temperature) | 1.2 | 1.26 | V | LP2951-02 (±0.5%) | 8 | ||
| Reference Voltage | 1.19 | 1.27 | V | LP2951-02 (±0.5%), Note 7 | 8 | ||
| Output Noise | 430 | μVRMS | 10 Hz to 100 kHz, CL = 1 μF | 8 | |||
| Output Noise | 160 | μVRMS | 10 Hz to 100 kHz, CL = 200 μF | 8 | |||
| Output Noise | 100 | μVRMS | 10 Hz to 100 kHz, CL = 3.3 μF, 0.01 μF bypass Feedback to Output | 8 | |||
| Feedback Bias Current | 20 | 40 | nA | 9 | |||
| Feedback Bias Current (over temperature) | 60 | nA | 9 | ||||
| Reference Voltage Temperature Coefficient | 20 | ppm/°C | LP2951-02 (±0.5%), Note 8 | 9 | |||
| Feedback Bias Current Temperature Coefficient | 0.1 | nA/°C | 9 | ||||
| Output Leakage Current | 0.01 | 1 | μA | VOH = 30V | 9 | ||
| Output Leakage Current (over temperature) | 2 | μA | VOH = 30V | 9 | |||
| Output Low Voltage (Flag) | 150 | 250 | mV | VIN = 4.5V, IOL = 200μA | 9 | ||
| Output Low Voltage (Flag) (over temperature) | 400 | mV | VIN = 4.5V, IOL = 200μA | 9 | |||
| Upper Threshold Voltage | 40 | 60 | mV | Note 6 | 9 | ||
| Upper Threshold Voltage (over temperature) | 25 | mV | Note 6 | 9 | |||
| Lower Threshold Voltage | 75 | 95 | mV | Note 6 | 9 | ||
| Lower Threshold Voltage (over temperature) | 140 | mV | Note 6 | 9 | |||
| Hysteresis | 15 | mV | Note 6 | 9 | |||
| Input Logic Voltage (Low) | 0.7 | V | LP2951-02 (±0.5%), Low | 10 | |||
| Input Logic Voltage (High) | 2 | V | LP2951-02 (±0.5%), High | 10 | |||
| Input Logic Voltage (threshold) | 1.3 | V | LP2951-02 (±0.5%) | 10 | |||
| Shutdown Input Current | 30 | 50 | μA | VSHUTDOWN = 2.4V | 11 | ||
| Shutdown Input Current (over temperature) | 100 | μA | VSHUTDOWN = 2.4V | 11 | |||
| Shutdown Input Current | 450 | 600 | μA | VSHUTDOWN = 30V | 11 | ||
| Shutdown Input Current (over temperature) | 700 | μA | VSHUTDOWN = 30V | 11 | |||
| Regulator Output Current in Shutdown | 3 | 10 | μA | Note 9 | 11 | ||
| Regulator Output Current in Shutdown (over temperature) | 20 | μA | Note 9 | 11 | |||
| Input Supply Voltage | -0.3 | 30 | V | 5 | |||
| Feedback Input Voltage | -1.5 | 30 | V | Note 2, 3 | 5 | ||
| Shutdown Input Voltage | -0.3 | 30 | V | Note 2 | 5 | ||
| Error Comparator Output Voltage | -0.3 | 30 | V | Note 2 | 5 | ||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 12 | ||
| Thermal Resistance, SOIC, Junction-to-Ambient | θJA | 160 | °C/W | Typically mounting on a 1'' square copper-clad FR4 circuit board | 12 | ||
| Thermal Resistance, SOIC, Junction-to-Case | θJC | 25 | °C/W | 12 |
CAD (KiCad official)
- Symbol:
LP2951-02YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lp2951-02ym-etched.step/lp2951-02ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2951-02ym.step/lp2951-02ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
9310d226e59ae920, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP2951-02YM
**Microchip Tech** · Power Management Specialized - PMIC · SOIC-8
LP2951-02YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated voltage output; requires at least 1.0 μF capacitor to ground for stability, and is tied to SENSE (pin 2) for a 5V pin-strapped output. |
| 2 | SENSE | input | Output voltage sense input, tied to VOUT (pin 1) for 5V pin-strapped operation. |
| 3 | SHDN | input | Logic-compatible shutdown input that switches the regulator on and off. |
| 4 | GND | power_in | Ground terminal. |
| 5 | ERROR | output | Open-collector error flag output that goes low when the output falls more than about 5% out of regulation, rated to sink 400 μA and needing an external pull-up resistor (100 kΩ to 1 MΩ suggested). |
| 6 | 5V TAP | passive | Internal resistor divider tap for 5V output, tied to FB (pin 7) for a 5V output. |
| 7 | FB | input | Voltage feedback input with nominal 20 nA bias current, tied to 5V TAP for 5V output or to an external resistor divider for 1.235V to 30V output. |
| 8 | VIN | power_in | Unregulated supply voltage input; a 0.1 μF capacitor to ground is advised if more than 10 inches of wire lies between it and the filter capacitor or if a battery is used. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.975 | 5 | 5.025 | V | TJ = 25°C, LP2951-02 (±0.5%) | 5 |
| Output Voltage | VOUT | 4.95 | | 5.05 | V | -25°C ≤ TJ ≤ +85°C, LP2951-02 (±0.5%) | 6 |
| Output Voltage Over Full Temperature Range | VOUT | 4.94 | | 5.06 | V | -40°C to +125°C, LP2951-02 (±0.5%) | 6 |
| Output Voltage Over Load Variation | VOUT | 4.93 | | 5.07 | V | LP2951-02 (±0.5%), 100 μA ≤ IL ≤ 100 mA, TJ ≤ TJ(max) | 6 |
| Output Voltage Temperature Coefficient | | | 20 | 100 | ppm/°C | LP2951-02 (±0.5%), Note 1 | 6 |
| Line Regulation | | | 0.03 | 0.1 | % | LP2951-02 (±0.5%), Note 2, 3 | 7 |
| Line Regulation (over temperature) | | | | 0.2 | % | LP2951-02 (±0.5%), Note 2, 3 | 7 |
| Load Regulation | | | 0.04 | 0.1 | % | LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA | 7 |
| Load Regulation (over temperature) | | | | 0.2 | % | LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA | 7 |
| Dropout Voltage | | | 50 | 80 | mV | Note 4, IL = 100 μA | 7 |
| Dropout Voltage (over temperature) | | | | 150 | mV | Note 4, IL = 100 μA | 7 |
| Dropout Voltage | | | 380 | 450 | mV | Note 4, IL = 100 mA | 7 |
| Dropout Voltage (over temperature) | | | | 600 | mV | Note 4, IL = 100 mA | 7 |
| Ground Current | | | 100 | 150 | μA | IL = 100 μA | 7 |
| Ground Current (over temperature) | | | | 200 | μA | IL = 100 μA | 7 |
| Ground Current | | | 8 | 12 | mA | IL = 100 mA | 7 |
| Ground Current (over temperature) | | | | 14 | mA | IL = 100 mA | 7 |
| Dropout Current | | | 180 | 250 | μA | VIN = 4.5V, IL = 100 μA | 8 |
| Dropout Current (over temperature) | | | | 310 | μA | VIN = 4.5V, IL = 100 μA | 8 |
| Current Limit | | | 160 | 220 | mA | VOUT = 0V | 8 |
| Thermal Regulation | | | 0.05 | 0.2 | %/W | Note 5 | 8 |
| Reference Voltage | | 1.22 | 1.235 | 1.25 | V | LP2951-02 (±0.5%) | 8 |
| Reference Voltage (over temperature) | | 1.2 | | 1.26 | V | LP2951-02 (±0.5%) | 8 |
| Reference Voltage | | 1.19 | | 1.27 | V | LP2951-02 (±0.5%), Note 7 | 8 |
| Output Noise | | | 430 | | μVRMS | 10 Hz to 100 kHz, CL = 1 μF | 8 |
| Output Noise | | | 160 | | μVRMS | 10 Hz to 100 kHz, CL = 200 μF | 8 |
| Output Noise | | | 100 | | μVRMS | 10 Hz to 100 kHz, CL = 3.3 μF, 0.01 μF bypass Feedback to Output | 8 |
| Feedback Bias Current | | | 20 | 40 | nA | | 9 |
| Feedback Bias Current (over temperature) | | | | 60 | nA | | 9 |
| Reference Voltage Temperature Coefficient | | | 20 | | ppm/°C | LP2951-02 (±0.5%), Note 8 | 9 |
| Feedback Bias Current Temperature Coefficient | | | 0.1 | | nA/°C | | 9 |
| Output Leakage Current | | | 0.01 | 1 | μA | VOH = 30V | 9 |
| Output Leakage Current (over temperature) | | | | 2 | μA | VOH = 30V | 9 |
| Output Low Voltage (Flag) | | | 150 | 250 | mV | VIN = 4.5V, IOL = 200μA | 9 |
| Output Low Voltage (Flag) (over temperature) | | | | 400 | mV | VIN = 4.5V, IOL = 200μA | 9 |
| Upper Threshold Voltage | | 40 | 60 | | mV | Note 6 | 9 |
| Upper Threshold Voltage (over temperature) | | 25 | | | mV | Note 6 | 9 |
| Lower Threshold Voltage | | | 75 | 95 | mV | Note 6 | 9 |
| Lower Threshold Voltage (over temperature) | | | | 140 | mV | Note 6 | 9 |
| Hysteresis | | | 15 | | mV | Note 6 | 9 |
| Input Logic Voltage (Low) | | | | 0.7 | V | LP2951-02 (±0.5%), Low | 10 |
| Input Logic Voltage (High) | | 2 | | | V | LP2951-02 (±0.5%), High | 10 |
| Input Logic Voltage (threshold) | | | 1.3 | | V | LP2951-02 (±0.5%) | 10 |
| Shutdown Input Current | | | 30 | 50 | μA | VSHUTDOWN = 2.4V | 11 |
| Shutdown Input Current (over temperature) | | | | 100 | μA | VSHUTDOWN = 2.4V | 11 |
| Shutdown Input Current | | | 450 | 600 | μA | VSHUTDOWN = 30V | 11 |
| Shutdown Input Current (over temperature) | | | | 700 | μA | VSHUTDOWN = 30V | 11 |
| Regulator Output Current in Shutdown | | | 3 | 10 | μA | Note 9 | 11 |
| Regulator Output Current in Shutdown (over temperature) | | | | 20 | μA | Note 9 | 11 |
| Input Supply Voltage | | -0.3 | | 30 | V | | 5 |
| Feedback Input Voltage | | -1.5 | | 30 | V | Note 2, 3 | 5 |
| Shutdown Input Voltage | | -0.3 | | 30 | V | Note 2 | 5 |
| Error Comparator Output Voltage | | -0.3 | | 30 | V | Note 2 | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 5 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 12 |
| Thermal Resistance, SOIC, Junction-to-Ambient | θJA | | 160 | | °C/W | Typically mounting on a 1'' square copper-clad FR4 circuit board | 12 |
| Thermal Resistance, SOIC, Junction-to-Case | θJC | | 25 | | °C/W | | 12 |
## CAD (KiCad official)
- Symbol: `LP2951-02YM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lp2951-02ym-etched.step` / `lp2951-02ym-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2951-02ym.step` / `lp2951-02ym.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/lp2951-02ym-datasheet.pdf) (30 pp, sha256 `9310d226e59ae920`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp2951-02ym-datasheet.pdf)