main
Ray Publish 0.1.0 e0f1d59
{
  "slug": "lp2904dr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lp2904dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp2904dr.kicad_sym",
    "lp2904dr.kicad_mod",
    "lp2904dr.glb",
    "lp2904dr.step",
    "lp2904dr.lbr",
    "docs/hero.png",
    "docs/lp2904dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp2904dr-hero.glb",
    "lp2904dr-hero.overlay.json",
    "lp2904dr-etched.glb"
  ],
  "component": {
    "mpn": "LP2904DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp2904.pdf",
    "parts": {
      "symbol": "lp2904dr.kicad_sym",
      "footprint": "lp2904dr.kicad_mod",
      "model_3d": "lp2904dr-hero.glb",
      "model_3d_plain": "lp2904dr-etched.glb",
      "model_3d_step": "lp2904dr-etched.step",
      "model_3d_step_plain": "lp2904dr.step",
      "lbr": "lp2904dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2058937",
      "mouser": "595-LP2904DR"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T09:14:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 946 calls left today"
      },
      "mouser": {
        "pn": "595-LP2904DR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1OUT",
        "type": "output",
        "description": "Channel 1 output; the datasheet states the output cannot drive to either rail, and a short circuit to ground at or below TA = 25°C with VCC ≤ 15 V is unlimited in duration, while shorts to VCC can cause excessive heating and eventual destruction."
      },
      {
        "number": "2",
        "name": "1IN–",
        "type": "input",
        "description": "Channel 1 inverting input; the input voltage is rated -0.3 V to 32 V, and if either input is below -0.3 V the input current must be limited to 1 mA."
      },
      {
        "number": "3",
        "name": "1IN+",
        "type": "input",
        "description": "Channel 1 noninverting input; the valid common-mode range is device ground to VCC - 1.5 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground or negative power supply; the datasheet notes split-supply operation is also possible."
      },
      {
        "number": "5",
        "name": "2IN+",
        "type": "input",
        "description": "Channel 2 noninverting input; the valid common-mode range is device ground to VCC - 1.5 V."
      },
      {
        "number": "6",
        "name": "2IN–",
        "type": "input",
        "description": "Channel 2 inverting input; the input voltage is rated -0.3 V to 32 V, and if either input is below -0.3 V the input current must be limited to 1 mA."
      },
      {
        "number": "7",
        "name": "2OUT",
        "type": "output",
        "description": "Channel 2 output; the datasheet states the output cannot drive to either rail, and a short circuit to ground at or below TA = 25°C with VCC ≤ 15 V is unlimited in duration, while shorts to VCC can cause excessive heating and eventual destruction."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive power supply; recommended supply range is 3 V to 32 V, and supply voltages above 32 V can permanently damage the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is printed once for the LP358/LP2904 dual op-amp datasheet; the 8-pin D (SOIC) pin table ; The datasheet gives no per-pin electrical limits. The pin descriptions use the device-level limits s; Pin 1 and Pin 8 types were taken from the pin table: Pin 1 and Pin 7 are outputs, Pins 2, 3, 5 and 6"
        ],
        "pages_sent": 22,
        "cost_usd": 0.0744,
        "at": "2026-11-10T09:13:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lp2904.pdf",
        "pages": 22,
        "sha256": "c058291cfadd8882",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp2904dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp2904dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6f444f0e176adf5e3dedc947d9fe3061bfe287e67c06feeab534cab19e9c7a58",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}