main
Ray
Publish 0.2.1
40b7a3d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214
{
"schema_version": 1,
"type": "component",
"slug": "lp28013sqvf",
"title": "LP28013SQVF",
"brief": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"lp28013sqvf"
],
"component": {
"mpn": "LP28013SQVF",
"manufacturer": "LOWPOWER",
"package": "TDFN-10-EP(3x3)",
"pin_count": 11,
"category": "PMIC",
"subcategory": "Battery Management",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP28013SQVF_C2890380.pdf",
"parts": {
"symbol": "lp28013sqvf.kicad_sym",
"footprint": "lp28013sqvf.kicad_mod",
"model_3d": "lp28013sqvf-hero.glb",
"model_3d_plain": "lp28013sqvf.glb",
"model_3d_step": "lp28013sqvf-etched.step",
"model_3d_step_plain": "lp28013sqvf.step",
"lbr": "lp28013sqvf.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "IN",
"type": "power_in",
"description": "Input power source pin. Connect to a wall adapter; operating range 4.5V-6.5V with absolute maximum 28V and internal OVP at ~7V. Typically bypassed with a 1uF capacitor to GND."
},
{
"number": "2",
"name": "CHRG",
"type": "output",
"description": "Open-drain charge status output. Pulled low (~5mA sink) by an internal NMOS while charging; high-impedance when the charge cycle completes. Requires an external pull-up resistor (e.g. through an indicator LED)."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "No connection. Leave floating or tie to GND per PCB layout preference."
},
{
"number": "4",
"name": "EN",
"type": "input",
"description": "Charge enable input, active low. Logic-low threshold <=0.4V enables charging; logic-high threshold >=1.4V disables the charger."
},
{
"number": "5",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Device ground reference. Tie to system ground along with the exposed pad (pin 11)."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "9",
"name": "ISET",
"type": "input",
"description": "Charge current program pin. Connect a 1% resistor RISET from this pin to GND to set the constant-current charge level per IBAT = 1700 * VISET / RISET (VISET=1V typical). Charge termination is detected when the ISET pin voltage falls below 100mV for tTERM."
},
{
"number": "10",
"name": "BAT",
"type": "power_out",
"description": "Battery connection pin. Provides regulated 4.2V float voltage and up to 1A charge current to a single-cell Li-Ion/Li-Polymer battery. Typically bypassed with a 10uF capacitor."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper electrical grounding and thermal dissipation."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP28013SQVF_C2890380.pdf",
"pages": 8,
"sha256": "345852311f6ff987",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lp28013sqvf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.98,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lp28013sqvf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.98,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "dadadff820e067d43d287aa5c3d9bface4e595cc48b1de332e3dd343978decde",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "LOWPOWER",
"Package": "TDFN-10-EP(3x3)",
"Category": "PMIC",
"Pins": "11"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lp28013sqvf"
],
"discovery_pitch": "LP28013SQVF (LOWPOWER) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lp28013sqvf.kicad_sym",
"lp28013sqvf.kicad_mod",
"lp28013sqvf.glb",
"lp28013sqvf.step",
"lp28013sqvf-etched.step",
"lp28013sqvf.lbr",
"docs/hero.png",
"docs/lp28013sqvf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lp28013sqvf-hero.glb",
"lp28013sqvf-hero.overlay.json"
],
"visibility": "public",
"variants": [
{
"mpn": "LP28013SQVF",
"kind": "packaging"
}
],
"updated_at": "2026-09-28T17:46:29.006Z",
"description": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"org": "adom"
}