← Commit history

Set visibility: public

Ray ·42d7eebf2e · ·parent 51ae9e9
1 file changed +8−5
page.json+8−5
@@ -44,25 +44,25 @@         "number": "3",         "name": "FBO",         "type": "output",-        "description": "Feedback loop drive output. Connects to the reference/feedback input of the external power-supply error amplifier to set the VBUS output voltage. FBO sources current in ~2\u00b5A steps to program 5V/9V/12V/20V (QC2.0) or continuous mode with \u00b10.2V steps (QC3.0). Typical divider uses a fixed 100k\u03a9 high-side resistor: VBUS = (100k/RLS + 1) x VFB."+        "description": "Feedback loop drive output. Connects to the reference/feedback input of the external power-supply error amplifier to set the VBUS output voltage. FBO sources current in ~2µA steps to program 5V/9V/12V/20V (QC2.0) or continuous mode with ±0.2V steps (QC3.0). Typical divider uses a fixed 100kΩ high-side resistor: VBUS = (100k/RLS + 1) x VFB."       },       {         "number": "4",         "name": "QC_EN",         "type": "input",-        "description": "High-Voltage Quick Charge enable. Drive low to disable HVQC (Qualcomm QC2.0/3.0) for high-current low-voltage applications. Drive high (or leave floating) to enable HVQC operation. Internally pulled high by a 2\u00b5A current source. VIH = VPS-1V, VIL = 1V max."+        "description": "High-Voltage Quick Charge enable. Drive low to disable HVQC (Qualcomm QC2.0/3.0) for high-current low-voltage applications. Drive high (or leave floating) to enable HVQC operation. Internally pulled high by a 2µA current source. VIH = VPS-1V, VIL = 1V max."       },       {         "number": "5",         "name": "PS",         "type": "power_in",-        "description": "Power Source pin for the internally generated supply. Fed from VBUS through a series resistor (~2.2k\u03a9 recommended) so the internal shunt regulator sees <8mA; also requires a decoupling capacitor to GND. VPS operating range 3.1V to 6.3V (typ 4.3V), shunt clamp ~6.2V, UVLO threshold ~2.7V."+        "description": "Power Source pin for the internally generated supply. Fed from VBUS through a series resistor (~2.2kΩ recommended) so the internal shunt regulator sees <8mA; also requires a decoupling capacitor to GND. VPS operating range 3.1V to 6.3V (typ 4.3V), shunt clamp ~6.2V, UVLO threshold ~2.7V."       },       {         "number": "6",         "name": "D-",         "type": "bidirectional",-        "description": "USB D- data line input/output. Used for BC1.2 short-detect handshake and for driving/monitoring the DCP/QC/SFCP protocol voltages. Internal ~19.53k\u03a9 pull-down (RDM(DWN)) is switched in during QC handshake."+        "description": "USB D- data line input/output. Used for BC1.2 short-detect handshake and for driving/monitoring the DCP/QC/SFCP protocol voltages. Internal ~19.53kΩ pull-down (RDM(DWN)) is switched in during QC handshake."       }     ],     "provenance": {@@ -136,5 +136,8 @@     "docs/lp103sb6f-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file