main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lnk626dg-tl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lnk626dg-tl: viewers · Ray
lnk626dg-tl-etched.fit.json lnk626dg-tl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lnk626dg-tl-etched.glb lnk626dg-tl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lnk626dg-tl-etched.step lnk626dg-tl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lnk626dg-tl.glb Publish 0.1.0 · Ray
lnk626dg-tl.kicad_mod Publish 0.1.0 · Ray
lnk626dg-tl.kicad_sym Publish 0.1.0 · Ray
lnk626dg-tl.lbr Publish 0.1.0 · Ray
lnk626dg-tl.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lnk626dg-tl: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lnk626dg-tl: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LNK626DG-TL

POWER INTEGRATIONS · AC-DC Controllers and Regulators · SOIC-7

LNK626DG-TL from POWER INTEGRATIONS, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input FEEDBACK pin. During normal operation this pin controls MOSFET switching by sensing the AC voltage on the transformer bias winding and regulates the output voltage based on its flyback voltage. Internal threshold V_FBth is regulated by the ON/OFF state machine (~2.5 µs sample delay).
2 BP power_out BYPASS pin. Connection for an external bypass capacitor (1 µF recommended, rated ≥6.8 V) for the internally generated 6.0 V supply. The internal regulator charges this cap from the DRAIN pin when the MOSFET is off; the IC runs off this stored energy when the MOSFET is on.
4 D power_in DRAIN pin. High-voltage power MOSFET drain (725 V BV_DSS). Provides internal operating current for both start-up and steady-state (via the internal regulator that charges the BYPASS capacitor). Pin 3 is omitted on the SO-8C package to increase HV creepage to the SOURCE pins.
5 S power_in SOURCE pin. Internally connected to the output MOSFET source; serves as the high-voltage power return and control-circuit common. Multiple S pins (5-8) are paralleled and also form the primary heat-sinking copper area.
6 S power_in SOURCE pin. Internally connected to the output MOSFET source; high-voltage power and control common return. Solder to a sufficient copper area to keep the SOURCE pin temperature ≤100 °C (D package) for adequate heat sinking.
7 S power_in SOURCE pin. Internally connected to the output MOSFET source; high-voltage power and control common return. Tie all S pins together on the PCB.
8 S power_in SOURCE pin. Internally connected to the output MOSFET source; high-voltage power and control common return. Use single-point (Kelvin) grounding at the negative terminal of the input filter capacitor.

Key specifications

Parameter Value
Manufacturer POWER INTEGRATIONS
Package SOIC-7
Category PMIC
Pins 7

Ordering variants

Same part, different packaging or reel option.

  • LNK626DG-TL
  • LNK626DG-TLPG

CAD (KiCad official)

  • Symbol: LNK626DG-TL
  • Footprint: Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-7 (KiCad packages3D, STEP)
  • 3D model files: lnk626dg-tl-etched.step / lnk626dg-tl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lnk626dg-tl.step / lnk626dg-tl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: POWER INTEGRATIONS datasheet (18 pp, sha256 0a75db0635a762f4, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF