component
LN6206P222MR-G
Public Made by Adomby adom
NATLINEAR Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLN6206P222MR-G
NATLINEAR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
LN6206P222MR-G from NATLINEAR, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the reference for the input and output voltage limits (VIN absolute maximum is GND-0.3 V to GND+6 V). |
| 2 | VOUT | power_out | Regulated output; absolute maximum is GND-0.3 V to VIN+0.3 V and the datasheet specifies output current up to 250 mA when VIN ≥ VOUT+1 V. |
| 3 | VIN | power_in | Regulator input; operating input voltage is 1.8 V to 6.0 V and the absolute maximum is GND-0.3 V to GND+6 V, with a 1 µF or larger input capacitor recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output current | IOUT | 250 | mA | VIN≥VOUT(S)+1.0 V | 4 | ||
| Input-output voltage difference (dropout) | Vdrop | 0.2 | 0.28 | V | IOUT=50 mA, 1.5 V ≤ VOUT(S) ≤ 2.5 V | 4 | |
| Input stability | 0.1 | 0.32 | %/V | VOUT(S)+0.5 V ≤ VIN ≤ 5.5 V, IOUT=1 mA | 4 | ||
| Load stability | VOUT 2 | 20 | 40 | mV | VIN=VOUT(S)+1.0 V, 1.0 mA ≤ IOUT ≤ 50 mA | 4 | |
| Output voltage temperature coefficient | -100 | 100 | ppm/℃ | VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤ Ta ≤ 85°C | 4 | ||
| Operating current | ISS1 | 2 | 3.5 | μA | VIN=VOUT(S)+1.0 V | 4 | |
| Input voltage | VIN | 1.8 | 6 | V | 4 | ||
| Ripple rejection | /PSRR/ | 40 | dB | VIN=VOUT(S)+1.0 V, f=1.0 kHz, Vrip=0.5 Vrms, IOUT=10 mA | 4 | ||
| Short-circuit current | Ishort | 30 | mA | VIN=VOUT(S)+1.5 V | 4 | ||
| Current limit | Ilim | 380 | mA | VIN=VOUT(S)+1.5 V | 4 | ||
| Input voltage (absolute maximum, referred to GND) | VIN | -0.3 | 6 | V | GND-0.3 to GND+6 as printed (referred to GND) | 3 | |
| Output voltage (absolute maximum, lower limit referred to GND) | VOUT | -0.3 | V | GND-0.3 to VIN+0.3 as printed; upper limit is VIN+0.3 V (not numeric) | 3 | ||
| Allowable power dissipation, SOT-23-3L | PD | 250 | mW | SOT-23-3L package | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 3 | ||
| Output voltage (accuracy ±2%) | VOUT(E)1 | 2.2 | V | VIN=VOUT(S)+1.0 V, IOUT=1 mA, ±2%; min = VOUT(S)×0.98, max = VOUT(S)×1.02 as printed (formula, not computed) | 4 |
CAD (KiCad official)
- Symbol:
LN6206P222MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ln6206p222mr-g-etched.step/ln6206p222mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ln6206p222mr-g.step/ln6206p222mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NATLINEAR datasheet (10 pp, sha256
f04568cd390b6b9b, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).