LN4890MME-G

{
 "schema": "adom.pads/1",
 "slug": "ln4890mme-g",
 "footprint": "MSOP-8_3x3mm_P0.65mm",
 "generated_from": {
  "footprint": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.1125,
   -0.975
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "SHUTDOWN",
   "type": "input",
   "description": "Chip enable input, active low. Drive low to place the amplifier in low-power shutdown mode (typ. 0.1 µA); drive high (VIH ≥ 1.2 V) for normal operation. VIL ≤ 0.4 V.",
   "is_pin1": true,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "BYPASS",
   "type": "passive",
   "description": "Bypass capacitance input pin for the internal mid-supply bias reference. Connect a 1 µF ceramic capacitor from this pin to GND for pop/click suppression and PSRR performance.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "+IN",
   "type": "input",
   "description": "Non-inverting (positive) differential audio input terminal to internal amplifier A1. Typically AC-coupled and referenced to BYPASS via an external resistor.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "-IN",
   "type": "input",
   "description": "Inverting (negative) differential audio input terminal to internal amplifier A1. Combined with an external Rf feedback resistor sets the closed-loop gain (Av = -Rf/Rin).",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VO1",
   "type": "output",
   "description": "Negative BTL output terminal (inverted phase). Drives one side of an 8Ω speaker load; delivers up to 1W into 8Ω at 5V VDD in combination with VO2.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VDD",
   "type": "power_in",
   "description": "Positive supply pin. Operating range 2.2 V to 5.0 V (absolute max 5.0 V). Decouple with a 1 µF capacitor to GND close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference and return for supply, bias, and output currents.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VO2",
   "type": "output",
   "description": "Positive BTL output terminal (in-phase). Drives the opposite side of the 8Ω speaker load from VO1 to form the bridge-tied load; no output coupling capacitor required.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}