main
Ray
Publish 0.1.0
ba2d4b2
LN2054Y42AMR
NATLINEAR · Battery Management ICs · SOT-23-5L
LN2054Y42AMR from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output that is pulled low by an internal N-channel MOSFET while charging, is forced high impedance during undervoltage lockout, and has a weak ~20µA pull-down after charge completion to indicate AC present. |
| 2 | GND | power_in | Ground reference pin for the charger. |
| 3 | BAT | power_out | Charge current output to the battery that regulates the final float voltage to 4.2V through an internal precision resistor divider, which is disconnected in shutdown mode. |
| 4 | VIN | power_in | Positive input supply that powers the charger; VCC can range from 4.25V to 6.5V, should be bypassed with at least 1µF, and the charger enters shutdown when VCC drops to within 30mV of the BAT voltage. |
| 5 | PROG | bidirectional | Charge current program, monitor and shutdown pin: a 1% resistor to ground sets the charge current, the pin servos to 1V in constant-current mode, a 1.21V threshold shuts the charger down, and the pin is clamped to about 2.4V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | Vcc | 4.25 | 6.5 | V | 5 | ||
| Regulated Output Voltage | Vfloat | 4.158 | 4.2 | 4.242 | V | 0℃<TA<85℃, IBAT = 40mA | 5 |
| BAT pin Current (Rprog=10k, current mode) | Ibat | 93 | 100 | 107 | mA | Rprog=10k, Current mode | 5 |
| BAT pin Current (Rprog=2k, current mode) | Ibat | 465 | 500 | 535 | mA | Rprog=2k, Current mode | 5 |
| Trickle charge current | Itrikl | 93 | 100 | 107 | mA | Vbat<Vtrikl, Rprog=2k | 5 |
| Trickle charge Threshold Voltage | Vtrikl | 2.8 | 2.9 | 3 | V | Rprog=10K, Vbat Rising | 5 |
| Trickle voltage hysteresis voltage | Vtrhys | 60 | 80 | 110 | mV | Rporg=10k | 5 |
| Vcc Undervoltage lockout Threshold | Vuv | 3.7 | 3.8 | 3.93 | V | From Vcc low to high | 5 |
| Vcc undervoltage lockout hysteresis | Vuvhys | 150 | 200 | 300 | mV | 5 | |
| Manual shutdown threshold voltage (PROG pin rising) | Vmsd | 1.15 | 1.21 | 1.3 | V | PROG pin rising | 5 |
| Manual shutdown threshold voltage (PROG pin falling) | Vmsd | 0.9 | 1 | 1.1 | V | PROG pin falling | 5 |
| Vcc-Vbat Lockout Threshold voltage (Vcc low to high) | Vasd | 70 | 100 | 140 | mV | Vcc from low to high | 5 |
| Vcc-Vbat Lockout Threshold voltage (Vcc high to low) | Vasd | 5 | 30 | 50 | mV | Vcc from high to low | 5 |
| C/10 Termination Current Threshold | Iterm | 0.085 | 0.1 | 0.115 | mA/mA | Rprog=10k | 5 |
| PROG pin Voltage | Vprog | 0.93 | 1 | 1.07 | V | Rprog=10k, Current mode | 5 |
| CHRG pin weak pull-down Current | Ichrg | 8 | 20 | 35 | µA | Vchrg=5V | 5 |
| Recharge Battery threshold Voltage | ΔVrecg | 100 | 200 | mV | VFLOAT - VRECHRG | 5 | |
| Input supply current (charge mode) | Icc | 300 | 2000 | µA | Charge mode, Rprog=10K | 5 | |
| Input supply current (standby mode) | Icc | 200 | 500 | µA | Standby mode | 5 | |
| Input supply current (shutdown mode) | Icc | 40 | µA | Shutdown mode (Rprog not connected, Vcc<Vbat or Vcc<Vuv) | 5 | ||
| BAT pin Current (standby mode) | Ibat | 0 | -2.5 | -6 | µA | Standby mode, Vbat=4.2V | 5 |
| BAT pin Current (shutdown mode) | Ibat | 1 | 2 | µA | Shutdown mode | 5 | |
| BAT pin Current (sleep mode) | Ibat | 1 | 2 | µA | Sleep mode, Vcc=0V | 5 | |
| Trickle charge Threshold Voltage hysteresis (Vtrikl Vbat rising) typ/max | Vtrikl | 2.8 | 2.9 | 3 | V | Rprog=10K, Vbat Rising | 5 |
| CHRG pin Output low voltage | Vchrg | 0.35 | 0.6 | V | Ichrg=5mA | 5 | |
| Input Supply Voltage | Vcc | -0.3 | 10 | V | Referenced to VSS (printed VSS-0.3~VSS+10) | 4 | |
| PROG pin Voltage | Vprog | -0.3 | V | Referenced to VSS; upper limit printed as Vcc+0.3 | 4 | ||
| BAT pin Voltage | Vbat | -0.3 | 7 | V | Referenced to VSS (printed Vss-0.3~7) | 4 | |
| CHAG pin Voltage | Vchrg | -0.3 | 10 | V | Referenced to VSS (printed VSS-0.3~VSS+10) | 4 | |
| Power Dissipation (SOT-23-5L) | PD | 250 | mW | SOT-23-5L | 4 | ||
| BAT pin Current | Ibat | 500 | mA | 4 | |||
| PROG pin Current | Iprog | 800 | µA | 4 | |||
| Operating Ambient Temperature | Topa | -40 | 85 | °C | 4 | ||
| Storage Temperature | Tstr | -65 | 125 | °C | 4 |
CAD (KiCad official)
- Symbol:
LN2054Y42AMR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ln2054y42amr-etched.step/ln2054y42amr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ln2054y42amr.step/ln2054y42amr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NATLINEAR datasheet (10 pp, sha256
ee683b9026f3719a, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LN2054Y42AMR
**NATLINEAR** · Battery Management ICs · SOT-23-5L
LN2054Y42AMR from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output that is pulled low by an internal N-channel MOSFET while charging, is forced high impedance during undervoltage lockout, and has a weak ~20µA pull-down after charge completion to indicate AC present. |
| 2 | GND | power_in | Ground reference pin for the charger. |
| 3 | BAT | power_out | Charge current output to the battery that regulates the final float voltage to 4.2V through an internal precision resistor divider, which is disconnected in shutdown mode. |
| 4 | VIN | power_in | Positive input supply that powers the charger; VCC can range from 4.25V to 6.5V, should be bypassed with at least 1µF, and the charger enters shutdown when VCC drops to within 30mV of the BAT voltage. |
| 5 | PROG | bidirectional | Charge current program, monitor and shutdown pin: a 1% resistor to ground sets the charge current, the pin servos to 1V in constant-current mode, a 1.21V threshold shuts the charger down, and the pin is clamped to about 2.4V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | Vcc | 4.25 | | 6.5 | V | | 5 |
| Regulated Output Voltage | Vfloat | 4.158 | 4.2 | 4.242 | V | 0℃<TA<85℃, IBAT = 40mA | 5 |
| BAT pin Current (Rprog=10k, current mode) | Ibat | 93 | 100 | 107 | mA | Rprog=10k, Current mode | 5 |
| BAT pin Current (Rprog=2k, current mode) | Ibat | 465 | 500 | 535 | mA | Rprog=2k, Current mode | 5 |
| Trickle charge current | Itrikl | 93 | 100 | 107 | mA | Vbat<Vtrikl, Rprog=2k | 5 |
| Trickle charge Threshold Voltage | Vtrikl | 2.8 | 2.9 | 3 | V | Rprog=10K, Vbat Rising | 5 |
| Trickle voltage hysteresis voltage | Vtrhys | 60 | 80 | 110 | mV | Rporg=10k | 5 |
| Vcc Undervoltage lockout Threshold | Vuv | 3.7 | 3.8 | 3.93 | V | From Vcc low to high | 5 |
| Vcc undervoltage lockout hysteresis | Vuvhys | 150 | 200 | 300 | mV | | 5 |
| Manual shutdown threshold voltage (PROG pin rising) | Vmsd | 1.15 | 1.21 | 1.3 | V | PROG pin rising | 5 |
| Manual shutdown threshold voltage (PROG pin falling) | Vmsd | 0.9 | 1 | 1.1 | V | PROG pin falling | 5 |
| Vcc-Vbat Lockout Threshold voltage (Vcc low to high) | Vasd | 70 | 100 | 140 | mV | Vcc from low to high | 5 |
| Vcc-Vbat Lockout Threshold voltage (Vcc high to low) | Vasd | 5 | 30 | 50 | mV | Vcc from high to low | 5 |
| C/10 Termination Current Threshold | Iterm | 0.085 | 0.1 | 0.115 | mA/mA | Rprog=10k | 5 |
| PROG pin Voltage | Vprog | 0.93 | 1 | 1.07 | V | Rprog=10k, Current mode | 5 |
| CHRG pin weak pull-down Current | Ichrg | 8 | 20 | 35 | µA | Vchrg=5V | 5 |
| Recharge Battery threshold Voltage | ΔVrecg | | 100 | 200 | mV | VFLOAT - VRECHRG | 5 |
| Input supply current (charge mode) | Icc | | 300 | 2000 | µA | Charge mode, Rprog=10K | 5 |
| Input supply current (standby mode) | Icc | | 200 | 500 | µA | Standby mode | 5 |
| Input supply current (shutdown mode) | Icc | | | 40 | µA | Shutdown mode (Rprog not connected, Vcc<Vbat or Vcc<Vuv) | 5 |
| BAT pin Current (standby mode) | Ibat | 0 | -2.5 | -6 | µA | Standby mode, Vbat=4.2V | 5 |
| BAT pin Current (shutdown mode) | Ibat | | 1 | 2 | µA | Shutdown mode | 5 |
| BAT pin Current (sleep mode) | Ibat | | 1 | 2 | µA | Sleep mode, Vcc=0V | 5 |
| Trickle charge Threshold Voltage hysteresis (Vtrikl Vbat rising) typ/max | Vtrikl | 2.8 | 2.9 | 3 | V | Rprog=10K, Vbat Rising | 5 |
| CHRG pin Output low voltage | Vchrg | | 0.35 | 0.6 | V | Ichrg=5mA | 5 |
| Input Supply Voltage | Vcc | -0.3 | | 10 | V | Referenced to VSS (printed VSS-0.3~VSS+10) | 4 |
| PROG pin Voltage | Vprog | -0.3 | | | V | Referenced to VSS; upper limit printed as Vcc+0.3 | 4 |
| BAT pin Voltage | Vbat | -0.3 | | 7 | V | Referenced to VSS (printed Vss-0.3~7) | 4 |
| CHAG pin Voltage | Vchrg | -0.3 | | 10 | V | Referenced to VSS (printed VSS-0.3~VSS+10) | 4 |
| Power Dissipation (SOT-23-5L) | PD | | | 250 | mW | SOT-23-5L | 4 |
| BAT pin Current | Ibat | | | 500 | mA | | 4 |
| PROG pin Current | Iprog | | | 800 | µA | | 4 |
| Operating Ambient Temperature | Topa | -40 | | 85 | °C | | 4 |
| Storage Temperature | Tstr | -65 | | 125 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `LN2054Y42AMR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ln2054y42amr-etched.step` / `ln2054y42amr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ln2054y42amr.step` / `ln2054y42amr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NATLINEAR datasheet](docs/ln2054y42amr-datasheet.pdf) (10 pp, sha256 `ee683b9026f3719a`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ln2054y42amr-datasheet.pdf)