← Commit history

ln1154b282mr-g: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·2981e2625c · ·parent b0600d2
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LN1154B282MR-G",+    "manufacturer": "NATLINEAR",+    "package": "SOT-23-5L",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "ln1154b282mr-g.kicad_sym",+      "footprint": "ln1154b282mr-g.kicad_mod",+      "model_3d": "ln1154b282mr-g-etched.glb",+      "model_3d_plain": "ln1154b282mr-g.glb",+      "model_3d_step": "ln1154b282mr-g-etched.step",+      "model_3d_step_plain": "ln1154b282mr-g.step",+      "lbr": "ln1154b282mr-g.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Positive supply input. Operating range 2.0 V to 7 V (absolute max VSS-0.3 V to VSS+8 V). A 2.2 µF or larger input capacitor (C1) between VIN and VSS is required for stability."+      },+      {+        "number": "2",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground / device negative reference. All voltages are referenced to VSS."+      },+      {+        "number": "3",+        "name": "CE",+        "type": "input",+        "description": "Chip Enable. Active-high (B option): drive ≥1.6 V (VCEH) to enable the regulator, ≤0.5 V (VCEL) to shut it down. The 'B' suffix version has an internal pull-down resistor, so leaving CE floating disables the part. Absolute max VSS-0.3 V to VIN+0.3 V."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Leave floating or tie to any potential; not internally bonded on the SOT-23-5 variant."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output. Fixed 3.95 V (VOUT(S)×0.98 to ×1.02 for the ±2% grade indicated by the '...2' accuracy code). Delivers up to 300 mA with VIN ≥ VOUT+1 V. A 2.2 µF or larger output capacitor (C2) is required for stability. An internal bleed/discharge transistor pulls VOUT down when the part is disabled."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}