component
LN1132P302MR-G
Public Made by Adomby adom
NATLINEAR Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLN1132P302MR-G
NATLINEAR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
LN1132P302MR-G from NATLINEAR, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground terminal, the reference for VIN and VOUT; the datasheet gives no separate electrical limit for this pin. |
| 2 | VOUT | power_out | Regulated output; the absolute maximum output voltage is VSS-0.3 V to VIN+0.3 V. |
| 3 | VIN | power_in | Input supply; the operating input range is 1.8 V to 7 V, and the absolute maximum is VSS-0.3 V to VSS+10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (printed ±2% for ordering digit 2 = 2) | -2 | 2 | % | Part-number digit 4 = 2 (±2%) | 1 | ||
| Input voltage | VIN | 1.8 | 7 | V | 4 | ||
| Output current | IOUT | 300 | mA | VIN≥VOUT(S)+1.0 V (footnote 5: design-guaranteed) | 4 | ||
| Input-output voltage differential (dropout), 2.6 V ≤ VOUT(S) ≤ 3.3 V row | Vdrop | 0.16 | 0.24 | V | IOUT=100 mA, 2.6 V ≤VOUT(S)≤3.3 V | 4 | |
| Input stability (line regulation) | 0.05 | 0.3 | %/V | VCE=VOUT(S)+0.5 V ≤VIN≤7V, IOUT=80 mA | 4 | ||
| Load stability (load regulation) | VOUT | 20 | 40 | mV | VCE=VIN=VOUT(S)+1.0 V, 1.0 mA ≤IOUT ≤80 mA | 4 | |
| Output voltage temperature coefficient (printed ±100 in typ column) | -100 | 100 | ppm/℃ | VCE=VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤Ta≤85°C | 4 | ||
| Operating current (quiescent) | ISS1 | 5 | 6.5 | μA | VCE=VIN=VOUT(S)+1.0 V | 4 | |
| Shutdown current | IOFF | 1 | uA | VIN=VOUT(S)+1.0 V, VCE=0 | 4 | ||
| Allowable power dissipation, SOT-23-3 package | PD | 250 | mW | SOT-23-3 (datasheet lists SOT-23-3; catalog package SOT-23-3L) | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 3 | ||
| Output voltage (set voltage VOUT(S) = 3.0 V for this MPN) | VOUT(E)1 | 3 | V | VCE=VIN=VOUT(S)+1.0 V, IOUT=40 mA | 4 | ||
| Power supply rejection ratio | /PSRR/ | 50 | dB | VCE=VIN=VOUT(S)+1.0 V, f=1.0 kHz, Vrip=0.5 Vrms, IOUT=80 mA | 4 | ||
| Short-circuit current | Ishort | 60 | mA | VCE=VIN=VOUT(S)+1.5 V | 4 | ||
| Current limit | Ilim | 380 | mA | VCE=VIN=VOUT(S)+1.5 V | 4 |
CAD (KiCad official)
- Symbol:
LN1132P302MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ln1132p302mr-g-etched.step/ln1132p302mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ln1132p302mr-g.step/ln1132p302mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NATLINEAR datasheet (11 pp, sha256
1bb5e5dda3c74ee1, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).