3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMX324IPT
STMicroelectronics · Operational Amplifier · TSSOP-14
LMX324IPT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Amplifier 1 output with rail-to-rail swing, within 180 mV max of the rails into a 10 kΩ load to VCC/2. |
| 2 | In1- | input | Amplifier 1 inverting input, limited to Vcc- - 0.3 V to Vcc+ + 0.3 V and requiring a series resistor limiting input current to 10 mA. |
| 3 | In1+ | input | Amplifier 1 non-inverting input with common-mode range of Vcc- - 0.2 V to Vcc+ - 1 V, which includes ground. |
| 4 | Vcc+ | power_in | Positive supply for all four amplifiers, operating range 2.3 V to 5.5 V (absolute max 6 V), with 10 nF decoupling placed close to the pin. |
| 5 | In2+ | input | Amplifier 2 non-inverting input with common-mode range of Vcc- - 0.2 V to Vcc+ - 1 V, which includes ground. |
| 6 | In2- | input | Amplifier 2 inverting input, limited to Vcc- - 0.3 V to Vcc+ + 0.3 V and requiring a series resistor limiting input current to 10 mA. |
| 7 | Out2 | output | Amplifier 2 output with rail-to-rail swing, within 180 mV max of the rails into a 10 kΩ load to VCC/2. |
| 8 | Out3 | output | Amplifier 3 output with rail-to-rail swing, within 180 mV max of the rails into a 10 kΩ load to VCC/2. |
| 9 | In3- | input | Amplifier 3 inverting input, limited to Vcc- - 0.3 V to Vcc+ + 0.3 V and requiring a series resistor limiting input current to 10 mA. |
| 10 | In3+ | input | Amplifier 3 non-inverting input with common-mode range of Vcc- - 0.2 V to Vcc+ - 1 V, which includes ground. |
| 11 | Vcc- | power_in | Negative supply (ground in single-supply use) for all four amplifiers, with 10 nF decoupling placed close to the pin. |
| 12 | In4+ | input | Amplifier 4 non-inverting input with common-mode range of Vcc- - 0.2 V to Vcc+ - 1 V, which includes ground. |
| 13 | In4- | input | Amplifier 4 inverting input, limited to Vcc- - 0.3 V to Vcc+ + 0.3 V and requiring a series resistor limiting input current to 10 mA. |
| 14 | Out4 | output | Amplifier 4 output with rail-to-rail swing, within 180 mV max of the rails into a 10 kΩ load to VCC/2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.3 | 5.5 | V | 4 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Supply voltage | VCC | 6 | V | 4 | |||
| Input current | Iin | 10 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD HBM (human body model) | 4000 | V | Human body model, 100 pF through 1.5 kΩ | 4 | |||
| Latch-up immunity | 200 | mA | 4 | ||||
| Thermal resistance junction to ambient (TSSOP14) | Rthja | 100 | °C/W | Junction to ambient; typical value | 4 | ||
| Input offset voltage (VCC+ = 2.7 V) | Vio | 4 | mV | 5 | |||
| Input offset voltage over temperature (VCC+ = 2.7 V) | Vio | 6 | mV | -40 °C < T< 125 °C | 5 | ||
| Input offset voltage drift (VCC+ = 2.7 V) | ΔVio/ΔT | 1 | μV/°C | -40 °C < T< 125 °C | 5 | ||
| Input offset current (VCC+ = 2.7 V) | Iio | 0.5 | 30 | nA | Vout = Vcc/2 | 5 | |
| Input offset current over temperature (VCC+ = 2.7 V) | Iio | 50 | nA | -40 °C < T< 125 °C | 5 | ||
| Input bias current (VCC+ = 2.7 V) | Iib | 27 | 60 | nA | Vout = Vcc/2 | 5 | |
| Input bias current over temperature (VCC+ = 2.7 V) | Iib | 110 | nA | -40 °C < T< 125 °C | 5 | ||
| Common mode rejection ratio (VCC+ = 2.7 V) | CMR | 70 | 75 | dB | Vic = 0 V to Vcc-1 V, Vout = Vcc/2 | 5 | |
| Common mode rejection ratio over temperature (VCC+ = 2.7 V) | CMR | 68 | dB | -40 °C < T< 125 °C | 5 | ||
| Large signal voltage gain RL = 10 kΩ (VCC+ = 2.7 V) | Avd | 100 | 110 | dB | RL = 10 kΩ, Vout = 0.5 V to (Vcc-0.5 V) | 5 | |
| Large signal voltage gain RL = 10 kΩ over temperature (VCC+ = 2.7 V) | Avd | 90 | dB | -40 °C < T< 125 °C | 5 | ||
| Large signal voltage gain RL = 2 kΩ (VCC+ = 2.7 V) | Avd | 90 | 100 | dB | RL = 2 kΩ, Vout = 0.5 V to (Vcc-0.5 V) | 5 | |
| Large signal voltage gain RL = 2 kΩ over temperature (VCC+ = 2.7 V) | Avd | 80 | dB | -40 °C < T< 125 °C | 5 | ||
| High level output voltage RL = 10 kΩ (VCC+ = 2.7 V) | VCC-VOH | 10 | 100 | mV | RL = 10 kΩ, | 5 | |
| High level output voltage RL = 10 kΩ over temperature (VCC+ = 2.7 V) | VCC-VOH | 200 | mV | -40 °C < T< 125 °C | 5 | ||
| High level output voltage RL = 2 kΩ (VCC+ = 2.7 V) | VCC-VOH | 40 | 300 | mV | RL = 2 kΩ | 5 | |
| High level output voltage RL = 2 kΩ over temperature (VCC+ = 2.7 V) | VCC-VOH | 400 | mV | -40 °C < T< 125 °C | 5 | ||
| Low level output voltage RL = 10 kΩ (VCC+ = 2.7 V) | VOL | 65 | 180 | mV | RL = 10 kΩ, | 5 | |
| Low level output voltage RL = 10 kΩ over temperature (VCC+ = 2.7 V) | VOL | 280 | mV | -40 °C < T< 125 °C | 5 | ||
| Low level output voltage RL = 2 kΩ (VCC+ = 2.7 V) | VOL | 120 | 300 | mV | RL = 2 kΩ, | 5 | |
| Low level output voltage RL = 2 kΩ over temperature (VCC+ = 2.7 V) | VOL | 400 | mV | -40 °C < T< 125 °C | 5 | ||
| Output sink current (VCC+ = 2.7 V) | Isink | 15 | 26 | mA | Vout = Vcc, Vid = -1 V | 5 | |
| Output sink current over temperature (VCC+ = 2.7 V) | Isink | 15 | mA | -40 °C < T< 125 °C | 5 | ||
| Output source current (VCC+ = 2.7 V) | Isource | 15 | 21 | mA | Vout = 0 V, Vid = 1 V | 5 | |
| Output source current over temperature (VCC+ = 2.7 V) | Isource | 12 | mA | -40 °C < T< 125 °C | 5 | ||
| Supply current per channel (VCC+ = 2.7 V) | ICC | 120 | 180 | µA | No load, Vout = VCC/2 | 5 | |
| Supply current per channel over temperature (VCC+ = 2.7 V) | ICC | 180 | µA | -40 °C < T< 125 °C | 5 | ||
| Input offset voltage (VCC+ = 5 V) | Vio | 4 | mV | 7 | |||
| Input offset voltage over temperature (VCC+ = 5 V) | Vio | 6 | mV | -40 °C < T< 125 °C | 7 | ||
| Input offset current (VCC+ = 5 V) | Iio | 0.5 | 30 | nA | Vout = Vcc/2 | 7 | |
| Input offset current over temperature (VCC+ = 5 V) | Iio | 50 | nA | -40 °C < T< 125 °C | 7 | ||
| Input bias current (VCC+ = 5 V) | Iib | 27 | 60 | nA | Vout = Vcc/2 | 7 | |
| Input bias current over temperature (VCC+ = 5 V) | Iib | 110 | nA | -40 °C < T< 125 °C | 7 | ||
| Common mode rejection ratio (VCC+ = 5 V) | CMR | 72 | 75 | dB | Vic = 0 V to Vcc-1V, Vout = Vcc/2 | 7 | |
| Common mode rejection ratio over temperature (VCC+ = 5 V) | CMR | 70 | dB | -40 °C < T< 125 °C | 7 | ||
| Large signal voltage gain RL = 10 kΩ (VCC+ = 5 V) | Avd | 100 | 110 | dB | RL = 10 kΩ, Vout = 0.5 V to (VCC - 0.5 V) | 7 | |
| Large signal voltage gain RL = 10 kΩ over temperature (VCC+ = 5 V) | Avd | 90 | dB | -40 °C < T< 125 °C | 7 | ||
| Large signal voltage gain RL = 2 kΩ (VCC+ = 5 V) | Avd | 90 | 100 | dB | RL = 2 kΩ | 7 | |
| Large signal voltage gain RL = 2 kΩ over temperature (VCC+ = 5 V) | Avd | 80 | dB | -40 °C < T< 125 °C | 7 | ||
| High level output voltage RL = 10 kΩ (VCC+ = 5 V) | VCC-VOH | 10 | 100 | mV | RL = 10 kΩ | 7 | |
| High level output voltage RL = 10 kΩ over temperature (VCC+ = 5 V) | VCC-VOH | 200 | mV | -40 °C < T< 125 °C | 7 | ||
| High level output voltage RL = 2 kΩ (VCC+ = 5 V) | VCC-VOH | 40 | 300 | mV | RL = 2 kΩ, | 7 | |
| High level output voltage RL = 2 kΩ over temperature (VCC+ = 5 V) | VCC-VOH | 400 | mV | -40 °C < T< 125 °C | 7 | ||
| Low level output voltage RL = 10 kΩ (VCC+ = 5 V) | VOL | 65 | 180 | mV | RL = 10 kΩ | 7 | |
| Low level output voltage RL = 10 kΩ over temperature (VCC+ = 5 V) | VOL | 280 | mV | -40 °C < T< 125 °C | 7 | ||
| Low level output voltage RL = 2 kΩ (VCC+ = 5 V) | VOL | 120 | 300 | mV | RL = 2 kΩ | 7 | |
| Low level output voltage RL = 2 kΩ over temperature (VCC+ = 5 V) | VOL | 400 | mV | -40 °C < T< 125 °C | 7 | ||
| Output sink current (VCC+ = 5 V) | Isink | 35 | 43 | mA | Vout = VCC, Vid = -1 V | 7 | |
| Output source current (VCC+ = 5 V) | Isource | 60 | 70 | mA | Vout = 0 V, Vid = 1 V | 7 | |
| Supply current per channel (VCC+ = 5 V) | ICC | 130 | 180 | µA | No load, Vout = VCC/2 | 7 | |
| Supply current per channel over temperature (VCC+ = 5 V) | ICC | 180 | µA | -40 °C < T< 125 °C | 7 |
CAD (KiCad official)
- Symbol:
LMX324IPT - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lmx324ipt-etched.step/lmx324ipt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmx324ipt.step/lmx324ipt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
d89847084f7663c4, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).