component
LMX2572RHAT
Public Made by Adomby adom
Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, VQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+78@@ -0,0 +1,78 @@+# LMX2572RHAT++**Texas Instruments** · Clock Generators, PLLs, Frequency Synthesizers · VQFN-40-EP(6x6)++LMX2572RHAT from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CE | input | Chip enable. High impedance CMOS input. 1.8-V to 3.3-V logic. Active HIGH powers on the device. |+| 2 | GND | power_in | VCO ground. |+| 3 | VbiasVCO | input | VCO bias. Connect a 470-nF (X7R) decoupling capacitor to VCO ground as close to this pin as possible. |+| 4 | GND | power_in | VCO ground. |+| 5 | SYNC | input | Phase synchronization trigger. Configurable to accept CMOS input (1.8-V to 3.3-V logic) or differential input. |+| 6 | GND | power_in | Digital ground. |+| 7 | VccDIG | power_in | Digital power supply. Connect a 0.1-µF decoupling capacitor to digital ground. |+| 8 | OSCinP | input | Reference input clock (+). High impedance self-biasing pin. Requires AC-coupling. |+| 9 | OSCinM | input | Reference input clock (-). High impedance self-biasing pin. Requires AC-coupling. |+| 10 | VregIN | input | Input reference path regulator output. Connect a 1-µF decoupling capacitor to RF ground as close to this pin as possible. |+| 11 | VccCP | power_in | Supply for charge pump. Connect a 0.1-µF decoupling capacitor to charge pump ground. |+| 12 | CPout | output | Charge pump output. Place C1 of loop filter close to this pin. |+| 13 | GND | power_in | Charge pump ground. |+| 14 | GND | power_in | Digital ground. |+| 15 | VccMASH | power_in | Digital power supply. Connect a 1-µF decoupling capacitor to digital ground. |+| 16 | SCK | input | SPI clock. High impedance CMOS input. 1.8-V to 3.3-V logic. |+| 17 | SDI | input | SPI data. High impedance CMOS input. 1.8-V to 3.3-V logic. |+| 18 | RFoutBM | output | Differential output B (-). Low impedance output. Requires AC-coupling. Configurable between RF output or SYSREF output. |+| 19 | RFoutBP | output | Differential output B (+). Low impedance output. Requires AC-coupling. Configurable between RF output or SYSREF output. |+| 20 | MUXout | output | Multiplexed output pin. Configurable between lock detect and register readback. |+| 21 | VccBUF | power_in | Supply for output buffers. Connect a 0.1-µF decoupling capacitor to RF ground. |+| 22 | RFoutAM | output | Differential output A (-). Low impedance output. Requires AC-coupling. |+| 23 | RFoutAP | output | Differential output A (+). Low impedance output. Requires AC-coupling. |+| 24 | CSB | input | SPI latch. High impedance CMOS input. 1.8-V to 3.3-V logic. |+| 25 | GND | power_in | VCO ground. |+| 26 | VccVCO2 | power_in | Supply for VCO. Connect a 1-µF decoupling capacitor to VCO ground. |+| 27 | VbiasVCO2 | input | VCO bias. Connect a 100-nF (X7R) decoupling capacitor to VCO ground. |+| 28 | SysRefReq | input | SYSREF request for JESD204B support. Configurable to accept CMOS input (1.8-V to 3.3-V logic) or differential input. |+| 29 | VrefVCO2 | input | VCO supply reference. Connect a 10-µF decoupling capacitor to VCO ground. |+| 30 | RampClk | input | Ramp trigger in automatic ramping mode or ramp clock in manual ramping mode. High impedance CMOS input. 1.8-V to 3.3-V logic. |+| 31 | GND | power_in | VCO ground. |+| 32 | RampDir | input | Ramp trigger in automatic ramping mode or ramp segment selection in manual ramping mode. High impedance CMOS input. 1.8-V to 3.3-V logic. |+| 33 | VbiasVARAC | input | VCO Varactor bias. Connect a 10-µF decoupling capacitor to VCO ground. |+| 34 | GND | power_in | VCO ground. |+| 35 | Vtune | input | VCO tuning voltage input. Connect a 1.5-nF or more capacitor to VCO ground. |+| 36 | VrefVCO | input | VCO supply reference. Connect a 10-µF decoupling capacitor to VCO ground. |+| 37 | VccVCO | power_in | Supply for VCO. Connect a 1-µF decoupling capacitor to VCO ground. |+| 38 | VregVCO | input | VCO regulator node. Connect a 10-nF decoupling capacitor to VCO ground. |+| 39 | GND | power_in | VCO ground. |+| 40 | GND | power_in | Digital ground. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-40-EP(6x6) |+| Category | Clock/Timing |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `LMX2572RHAT`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)+- 3D model files: `lmx2572rhat-etched.step` / `lmx2572rhat-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmx2572rhat.step` / `lmx2572rhat.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmx2572) (96 pp, sha256 `b72fd5e826100d9b`, retrieved 2026-10-05, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmx2572rhat-datasheet.pdf)
page.jsonadded+359@@ -0,0 +1,359 @@+{+ "slug": "lmx2572rhat",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, VQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "clock-timing",+ "lmx2572rhat",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmx2572rhat.kicad_sym",+ "lmx2572rhat.kicad_mod",+ "lmx2572rhat.glb",+ "lmx2572rhat.step",+ "lmx2572rhat.lbr",+ "docs/hero.png",+ "docs/lmx2572rhat-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lmx2572rhat-hero.glb",+ "lmx2572rhat-hero.overlay.json"+ ],+ "component": {+ "mpn": "LMX2572RHAT",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-40-EP(6x6)",+ "pin_count": 41,+ "category": "Clock/Timing",+ "subcategory": "Clock Generators, PLLs, Frequency Synthesizers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmx2572",+ "parts": {+ "symbol": "lmx2572rhat.kicad_sym",+ "footprint": "lmx2572rhat.kicad_mod",+ "model_3d": "lmx2572rhat-hero.glb",+ "model_3d_plain": "lmx2572rhat.glb",+ "model_3d_step": "lmx2572rhat-etched.step",+ "model_3d_step_plain": "lmx2572rhat.step",+ "lbr": "lmx2572rhat.lbr"+ },+ "distributor_links": {+ "lcsc": 2651218,+ "digikey": "296-47540-2-ND",+ "mouser": "595-LMX2572RHAT"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:33:19Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47540-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-LMX2572RHAT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CE",+ "type": "input",+ "description": "Chip enable. High impedance CMOS input. 1.8-V to 3.3-V logic. Active HIGH powers on the device."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "3",+ "name": "VbiasVCO",+ "type": "input",+ "description": "VCO bias. Connect a 470-nF (X7R) decoupling capacitor to VCO ground as close to this pin as possible."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "5",+ "name": "SYNC",+ "type": "input",+ "description": "Phase synchronization trigger. Configurable to accept CMOS input (1.8-V to 3.3-V logic) or differential input."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "7",+ "name": "VccDIG",+ "type": "power_in",+ "description": "Digital power supply. Connect a 0.1-µF decoupling capacitor to digital ground."+ },+ {+ "number": "8",+ "name": "OSCinP",+ "type": "input",+ "description": "Reference input clock (+). High impedance self-biasing pin. Requires AC-coupling."+ },+ {+ "number": "9",+ "name": "OSCinM",+ "type": "input",+ "description": "Reference input clock (-). High impedance self-biasing pin. Requires AC-coupling."+ },+ {+ "number": "10",+ "name": "VregIN",+ "type": "input",+ "description": "Input reference path regulator output. Connect a 1-µF decoupling capacitor to RF ground as close to this pin as possible."+ },+ {+ "number": "11",+ "name": "VccCP",+ "type": "power_in",+ "description": "Supply for charge pump. Connect a 0.1-µF decoupling capacitor to charge pump ground."+ },+ {+ "number": "12",+ "name": "CPout",+ "type": "output",+ "description": "Charge pump output. Place C1 of loop filter close to this pin."+ },+ {+ "number": "13",+ "name": "GND",+ "type": "power_in",+ "description": "Charge pump ground."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "15",+ "name": "VccMASH",+ "type": "power_in",+ "description": "Digital power supply. Connect a 1-µF decoupling capacitor to digital ground."+ },+ {+ "number": "16",+ "name": "SCK",+ "type": "input",+ "description": "SPI clock. High impedance CMOS input. 1.8-V to 3.3-V logic."+ },+ {+ "number": "17",+ "name": "SDI",+ "type": "input",+ "description": "SPI data. High impedance CMOS input. 1.8-V to 3.3-V logic."+ },+ {+ "number": "18",+ "name": "RFoutBM",+ "type": "output",+ "description": "Differential output B (-). Low impedance output. Requires AC-coupling. Configurable between RF output or SYSREF output."+ },+ {+ "number": "19",+ "name": "RFoutBP",+ "type": "output",+ "description": "Differential output B (+). Low impedance output. Requires AC-coupling. Configurable between RF output or SYSREF output."+ },+ {+ "number": "20",+ "name": "MUXout",+ "type": "output",+ "description": "Multiplexed output pin. Configurable between lock detect and register readback."+ },+ {+ "number": "21",+ "name": "VccBUF",+ "type": "power_in",+ "description": "Supply for output buffers. Connect a 0.1-µF decoupling capacitor to RF ground."+ },+ {+ "number": "22",+ "name": "RFoutAM",+ "type": "output",+ "description": "Differential output A (-). Low impedance output. Requires AC-coupling."+ },+ {+ "number": "23",+ "name": "RFoutAP",+ "type": "output",+ "description": "Differential output A (+). Low impedance output. Requires AC-coupling."+ },+ {+ "number": "24",+ "name": "CSB",+ "type": "input",+ "description": "SPI latch. High impedance CMOS input. 1.8-V to 3.3-V logic."+ },+ {+ "number": "25",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "26",+ "name": "VccVCO2",+ "type": "power_in",+ "description": "Supply for VCO. Connect a 1-µF decoupling capacitor to VCO ground."+ },+ {+ "number": "27",+ "name": "VbiasVCO2",+ "type": "input",+ "description": "VCO bias. Connect a 100-nF (X7R) decoupling capacitor to VCO ground."+ },+ {+ "number": "28",+ "name": "SysRefReq",+ "type": "input",+ "description": "SYSREF request for JESD204B support. Configurable to accept CMOS input (1.8-V to 3.3-V logic) or differential input."+ },+ {+ "number": "29",+ "name": "VrefVCO2",+ "type": "input",+ "description": "VCO supply reference. Connect a 10-µF decoupling capacitor to VCO ground."+ },+ {+ "number": "30",+ "name": "RampClk",+ "type": "input",+ "description": "Ramp trigger in automatic ramping mode or ramp clock in manual ramping mode. High impedance CMOS input. 1.8-V to 3.3-V logic."+ },+ {+ "number": "31",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "32",+ "name": "RampDir",+ "type": "input",+ "description": "Ramp trigger in automatic ramping mode or ramp segment selection in manual ramping mode. High impedance CMOS input. 1.8-V to 3.3-V logic."+ },+ {+ "number": "33",+ "name": "VbiasVARAC",+ "type": "input",+ "description": "VCO Varactor bias. Connect a 10-µF decoupling capacitor to VCO ground."+ },+ {+ "number": "34",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "35",+ "name": "Vtune",+ "type": "input",+ "description": "VCO tuning voltage input. Connect a 1.5-nF or more capacitor to VCO ground."+ },+ {+ "number": "36",+ "name": "VrefVCO",+ "type": "input",+ "description": "VCO supply reference. Connect a 10-µF decoupling capacitor to VCO ground."+ },+ {+ "number": "37",+ "name": "VccVCO",+ "type": "power_in",+ "description": "Supply for VCO. Connect a 1-µF decoupling capacitor to VCO ground."+ },+ {+ "number": "38",+ "name": "VregVCO",+ "type": "input",+ "description": "VCO regulator node. Connect a 10-nF decoupling capacitor to VCO ground."+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "VCO ground."+ },+ {+ "number": "40",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "41",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 41 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 12,+ "cost_usd": 0.2401,+ "at": "2026-10-05T19:33:02"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmx2572",+ "pages": 96,+ "sha256": "b72fd5e826100d9b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 41,+ "described": 41,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}