component
LMV821ILT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLMV821ILT
STMicroelectronics · Operational Amplifier · SOT-23-5
LMV821ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting input; common mode range is Vcc- - 0.2 V to Vcc+ - 1 V and input voltage must stay within Vcc- - 0.3 V to Vcc+ + 0.3 V. |
| 2 | VCC- | power_in | Negative supply (ground in single-supply use); supply range between VCC+ and VCC- is 2.5 V to 5.5 V, with 10 nF decoupling advised close to the supply pins. |
| 3 | IN- | input | Inverting input; common mode range is Vcc- - 0.2 V to Vcc+ - 1 V and input current must be limited to 10 mA by a series resistor. |
| 4 | OUT | output | Rail-to-rail amplifier output, swinging within 150 mV max of either rail into a 2 kΩ load to Vcc/2. |
| 5 | VCC+ | power_in | Positive supply; operating range 2.5 V to 5.5 V with absolute maximum 6 V, with 10 nF decoupling advised close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LMV821ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lmv821ilt-etched.step/lmv821ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv821ilt.step/lmv821ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (32 pp, sha256
524bf50e2bdef347, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).