main
Ray
Publish 0.1.0
248ff83
LMV796QMFX
Texas Instruments · Operational Amplifier · SOT-23-5
LMV796QMFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, capable of driving a 600 Ω load and sourcing as much as 60 mA of current. |
| 2 | V- | power_in | Negative supply rail; the datasheet specifies the supply as V+ - V- from 2.0 V to 5.5 V over −40°C to 125°C (1.8 V to 5.5 V from 0°C to 125°C), with absolute maximum supply voltage of 6.0 V. |
| 3 | +IN | input | Non-inverting input of the CMOS-input amplifier; the common-mode range includes the negative supply rail, allowing direct sensing at ground in single-supply operation. |
| 4 | -IN | input | Inverting input of the CMOS-input amplifier, with typical input bias current of about 100 fA at 25°C. |
| 5 | V+ | power_in | Positive supply rail; the datasheet specifies the supply as V+ - V- from 2.0 V to 5.5 V over −40°C to 125°C (1.8 V to 5.5 V from 0°C to 125°C), with absolute maximum supply voltage of 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (2.5V table) | VOS | -1.35 | 0.1 | 1.35 | mV | 2 | |
| Input Bias Current (2.5V table, 25 C) | IB | 0.05 | 1 | pA | VCM = 1.0V | 2 | |
| Input Bias Current (2.5V table, -40 to 85 C) | IB | 25 | pA | −40°C ≤ TA ≤ 85°C | 2 | ||
| Input Bias Current (2.5V table, -40 to 125 C) | IB | 100 | pA | −40°C ≤ TA ≤ 125°C | 2 | ||
| Common Mode Rejection Ratio (2.5V table) | CMRR | 80 | 94 | dB | 0V ≤ VCM ≤ 1.4V | 3 | |
| Common Mode Rejection Ratio (2.5V table, temperature extremes) | CMRR | 75 | dB | 0V ≤ VCM ≤ 1.4V | 3 | ||
| Power Supply Rejection Ratio (2.5V table) | PSRR | 80 | 100 | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 3 | |
| Power Supply Rejection Ratio (2.5V table, temperature extremes) | PSRR | 75 | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 3 | ||
| Common Mode Voltage Range (2.5V table) | CMVR | -0.3 | 1.5 | V | CMRR ≥ 60 dB | 3 | |
| Open Loop Voltage Gain (2.5V table, RLOAD 2 kΩ) | AVOL | 85 | 98 | dB | VOUT = 0.15V to 2.2V, RLOAD = 2 kΩ to V+/2 | 3 | |
| Open Loop Voltage Gain (2.5V table, RLOAD 2 kΩ, temperature extremes) | AVOL | 80 | dB | VOUT = 0.15V to 2.2V, RLOAD = 2 kΩ to V+/2 | 3 | ||
| Open Loop Voltage Gain (2.5V table, RLOAD 10 kΩ) | AVOL | 88 | 110 | dB | VOUT = 0.15V to 2.2V, RLOAD = 10 kΩ to V+/2 | 3 | |
| Open Loop Voltage Gain (2.5V table, RLOAD 10 kΩ, temperature extremes) | AVOL | 84 | dB | VOUT = 0.15V to 2.2V, RLOAD = 10 kΩ to V+/2 | 3 | ||
| Output Voltage Swing High (2.5V table, RLOAD 2 kΩ) | 25 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 3 | ||
| Output Voltage Swing High (2.5V table, RLOAD 2 kΩ, temperature extremes) | 82 | mV | RLOAD = 2 kΩ to V+/2 | 3 | |||
| Output Voltage Swing High (2.5V table, RLOAD 10 kΩ) | 20 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 3 | ||
| Output Voltage Swing High (2.5V table, RLOAD 10 kΩ, temperature extremes) | 71 | mV | RLOAD = 10 kΩ to V+/2 | 3 | |||
| Output Voltage Swing Low (2.5V table, RLOAD 2 kΩ) | 30 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 3 | ||
| Output Voltage Swing Low (2.5V table, RLOAD 2 kΩ, temperature extremes) | 78 | mV | RLOAD = 2 kΩ to V+/2 | 3 | |||
| Output Voltage Swing Low (2.5V table, RLOAD 10 kΩ) | 15 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 3 | ||
| Output Voltage Swing Low (2.5V table, RLOAD 10 kΩ, temperature extremes) | 67 | mV | RLOAD = 10 kΩ to V+/2 | 3 | |||
| Output Current Sourcing (2.5V table) | IOUT | 35 | 47 | mA | VIN = 200 mV | 3 | |
| Output Current Sourcing (2.5V table, temperature extremes) | IOUT | 28 | mA | VIN = 200 mV | 3 | ||
| Output Current Sinking (2.5V table) | IOUT | 7 | 15 | mA | VIN = −200 mV | 3 | |
| Supply Current per Amplifier (2.5V table) | IS | 0.95 | 1.3 | mA | per channel | 3 | |
| Supply Current per Amplifier (2.5V table, temperature extremes) | IS | 1.65 | mA | per channel | 3 | ||
| Input Offset Voltage (5V table) | VOS | -1.35 | 0.1 | 1.35 | mV | 3 | |
| Input Bias Current (5V table, 25 C) | IB | 0.1 | 1 | pA | VCM = 2.0V | 4 | |
| Input Bias Current (5V table, -40 to 85 C) | IB | 25 | pA | −40°C ≤ TA ≤ 85°C | 4 | ||
| Input Bias Current (5V table, -40 to 125 C) | IB | 100 | pA | −40°C ≤ TA ≤ 125°C | 4 | ||
| Common Mode Rejection Ratio (5V table) | CMRR | 80 | 100 | dB | 0V ≤ VCM ≤ 3.7V | 4 | |
| Common Mode Rejection Ratio (5V table, temperature extremes) | CMRR | 75 | dB | 0V ≤ VCM ≤ 3.7V | 4 | ||
| Power Supply Rejection Ratio (5V table) | PSRR | 80 | 100 | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 4 | |
| Power Supply Rejection Ratio (5V table, temperature extremes) | PSRR | 75 | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 4 | ||
| Common Mode Voltage Range (5V table) | CMVR | -0.3 | 4 | V | CMRR ≥ 60 dB | 4 | |
| Open Loop Voltage Gain (5V table, RLOAD 2 kΩ) | AVOL | 85 | 97 | dB | VOUT = 0.3V to 4.7V, RLOAD = 2 kΩ to V+/2 | 4 | |
| Open Loop Voltage Gain (5V table, RLOAD 2 kΩ, temperature extremes) | AVOL | 80 | dB | VOUT = 0.3V to 4.7V, RLOAD = 2 kΩ to V+/2 | 4 | ||
| Open Loop Voltage Gain (5V table, RLOAD 10 kΩ) | AVOL | 88 | 110 | dB | VOUT = 0.3V to 4.7V, RLOAD = 10 kΩ to V+/2 | 4 | |
| Open Loop Voltage Gain (5V table, RLOAD 10 kΩ, temperature extremes) | AVOL | 84 | dB | VOUT = 0.3V to 4.7V, RLOAD = 10 kΩ to V+/2 | 4 | ||
| Output Voltage Swing High (5V table, RLOAD 2 kΩ) | 35 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 4 | ||
| Output Voltage Swing High (5V table, RLOAD 2 kΩ, temperature extremes) | 82 | mV | RLOAD = 2 kΩ to V+/2 | 4 | |||
| Output Voltage Swing High (5V table, RLOAD 10 kΩ) | 25 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 4 | ||
| Output Voltage Swing High (5V table, RLOAD 10 kΩ, temperature extremes) | 71 | mV | RLOAD = 10 kΩ to V+/2 | 4 | |||
| Output Voltage Swing Low (5V table, RLOAD 2 kΩ) | 42 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 4 | ||
| Output Voltage Swing Low (5V table, RLOAD 2 kΩ, temperature extremes) | 78 | mV | RLOAD = 2 kΩ to V+/2 | 4 | |||
| Output Voltage Swing Low (5V table, RLOAD 10 kΩ) | 20 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 4 | ||
| Output Voltage Swing Low (5V table, RLOAD 10 kΩ, temperature extremes) | 67 | mV | RLOAD = 10 kΩ to V+/2 | 4 | |||
| Output Current Sourcing (5V table) | IOUT | 45 | 60 | mA | VIN = 200 mV | 4 | |
| Output Current Sourcing (5V table, temperature extremes) | IOUT | 37 | mA | VIN = 200 mV | 4 | ||
| Output Current Sinking (5V table) | IOUT | 10 | 21 | mA | VIN = −200 mV | 4 | |
| Supply Current per Amplifier (5V table) | IS | 1.15 | 1.4 | mA | per channel | 4 | |
| Supply Current per Amplifier (5V table, temperature extremes) | IS | 1.75 | mA | per channel | 4 | ||
| VIN Differential | VIN | -0.3 | 0.3 | V | 2 | ||
| Supply Voltage (V+, V−) | V+, V− | 6 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Temperature Range | -40 | 125 | °C | 2 | |||
| Supply Voltage (V+, V−) | V+, V− | 2 | 5.5 | V | −40°C ≤ TA ≤ 125°C | 2 | |
| Supply Voltage (V+, V−) | V+, V− | 1.8 | 5.5 | V | 0°C ≤ TA ≤ 125°C | 2 | |
| Package Thermal Resistance (θJA), 5-Pin SOT-23 | θJA | 180 | °C/W | 5-Pin SOT-23 | 2 |
CAD (KiCad official)
- Symbol:
LMV796QMFX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmv796qmfx-etched.step/lmv796qmfx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv796qmfx.step/lmv796qmfx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
42726005a805f114, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMV796QMFX
**Texas Instruments** · Operational Amplifier · SOT-23-5
LMV796QMFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, capable of driving a 600 Ω load and sourcing as much as 60 mA of current. |
| 2 | V- | power_in | Negative supply rail; the datasheet specifies the supply as V+ - V- from 2.0 V to 5.5 V over −40°C to 125°C (1.8 V to 5.5 V from 0°C to 125°C), with absolute maximum supply voltage of 6.0 V. |
| 3 | +IN | input | Non-inverting input of the CMOS-input amplifier; the common-mode range includes the negative supply rail, allowing direct sensing at ground in single-supply operation. |
| 4 | -IN | input | Inverting input of the CMOS-input amplifier, with typical input bias current of about 100 fA at 25°C. |
| 5 | V+ | power_in | Positive supply rail; the datasheet specifies the supply as V+ - V- from 2.0 V to 5.5 V over −40°C to 125°C (1.8 V to 5.5 V from 0°C to 125°C), with absolute maximum supply voltage of 6.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (2.5V table) | VOS | -1.35 | 0.1 | 1.35 | mV | | 2 |
| Input Bias Current (2.5V table, 25 C) | IB | | 0.05 | 1 | pA | VCM = 1.0V | 2 |
| Input Bias Current (2.5V table, -40 to 85 C) | IB | | | 25 | pA | −40°C ≤ TA ≤ 85°C | 2 |
| Input Bias Current (2.5V table, -40 to 125 C) | IB | | | 100 | pA | −40°C ≤ TA ≤ 125°C | 2 |
| Common Mode Rejection Ratio (2.5V table) | CMRR | 80 | 94 | | dB | 0V ≤ VCM ≤ 1.4V | 3 |
| Common Mode Rejection Ratio (2.5V table, temperature extremes) | CMRR | 75 | | | dB | 0V ≤ VCM ≤ 1.4V | 3 |
| Power Supply Rejection Ratio (2.5V table) | PSRR | 80 | 100 | | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 3 |
| Power Supply Rejection Ratio (2.5V table, temperature extremes) | PSRR | 75 | | | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 3 |
| Common Mode Voltage Range (2.5V table) | CMVR | -0.3 | | 1.5 | V | CMRR ≥ 60 dB | 3 |
| Open Loop Voltage Gain (2.5V table, RLOAD 2 kΩ) | AVOL | 85 | 98 | | dB | VOUT = 0.15V to 2.2V, RLOAD = 2 kΩ to V+/2 | 3 |
| Open Loop Voltage Gain (2.5V table, RLOAD 2 kΩ, temperature extremes) | AVOL | 80 | | | dB | VOUT = 0.15V to 2.2V, RLOAD = 2 kΩ to V+/2 | 3 |
| Open Loop Voltage Gain (2.5V table, RLOAD 10 kΩ) | AVOL | 88 | 110 | | dB | VOUT = 0.15V to 2.2V, RLOAD = 10 kΩ to V+/2 | 3 |
| Open Loop Voltage Gain (2.5V table, RLOAD 10 kΩ, temperature extremes) | AVOL | 84 | | | dB | VOUT = 0.15V to 2.2V, RLOAD = 10 kΩ to V+/2 | 3 |
| Output Voltage Swing High (2.5V table, RLOAD 2 kΩ) | | | 25 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 3 |
| Output Voltage Swing High (2.5V table, RLOAD 2 kΩ, temperature extremes) | | | | 82 | mV | RLOAD = 2 kΩ to V+/2 | 3 |
| Output Voltage Swing High (2.5V table, RLOAD 10 kΩ) | | | 20 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 3 |
| Output Voltage Swing High (2.5V table, RLOAD 10 kΩ, temperature extremes) | | | | 71 | mV | RLOAD = 10 kΩ to V+/2 | 3 |
| Output Voltage Swing Low (2.5V table, RLOAD 2 kΩ) | | | 30 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 3 |
| Output Voltage Swing Low (2.5V table, RLOAD 2 kΩ, temperature extremes) | | | | 78 | mV | RLOAD = 2 kΩ to V+/2 | 3 |
| Output Voltage Swing Low (2.5V table, RLOAD 10 kΩ) | | | 15 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 3 |
| Output Voltage Swing Low (2.5V table, RLOAD 10 kΩ, temperature extremes) | | | | 67 | mV | RLOAD = 10 kΩ to V+/2 | 3 |
| Output Current Sourcing (2.5V table) | IOUT | 35 | 47 | | mA | VIN = 200 mV | 3 |
| Output Current Sourcing (2.5V table, temperature extremes) | IOUT | 28 | | | mA | VIN = 200 mV | 3 |
| Output Current Sinking (2.5V table) | IOUT | 7 | 15 | | mA | VIN = −200 mV | 3 |
| Supply Current per Amplifier (2.5V table) | IS | | 0.95 | 1.3 | mA | per channel | 3 |
| Supply Current per Amplifier (2.5V table, temperature extremes) | IS | | | 1.65 | mA | per channel | 3 |
| Input Offset Voltage (5V table) | VOS | -1.35 | 0.1 | 1.35 | mV | | 3 |
| Input Bias Current (5V table, 25 C) | IB | | 0.1 | 1 | pA | VCM = 2.0V | 4 |
| Input Bias Current (5V table, -40 to 85 C) | IB | | | 25 | pA | −40°C ≤ TA ≤ 85°C | 4 |
| Input Bias Current (5V table, -40 to 125 C) | IB | | | 100 | pA | −40°C ≤ TA ≤ 125°C | 4 |
| Common Mode Rejection Ratio (5V table) | CMRR | 80 | 100 | | dB | 0V ≤ VCM ≤ 3.7V | 4 |
| Common Mode Rejection Ratio (5V table, temperature extremes) | CMRR | 75 | | | dB | 0V ≤ VCM ≤ 3.7V | 4 |
| Power Supply Rejection Ratio (5V table) | PSRR | 80 | 100 | | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 4 |
| Power Supply Rejection Ratio (5V table, temperature extremes) | PSRR | 75 | | | dB | 2.0V ≤ V+ ≤ 5.5V, VCM = 0V | 4 |
| Common Mode Voltage Range (5V table) | CMVR | -0.3 | | 4 | V | CMRR ≥ 60 dB | 4 |
| Open Loop Voltage Gain (5V table, RLOAD 2 kΩ) | AVOL | 85 | 97 | | dB | VOUT = 0.3V to 4.7V, RLOAD = 2 kΩ to V+/2 | 4 |
| Open Loop Voltage Gain (5V table, RLOAD 2 kΩ, temperature extremes) | AVOL | 80 | | | dB | VOUT = 0.3V to 4.7V, RLOAD = 2 kΩ to V+/2 | 4 |
| Open Loop Voltage Gain (5V table, RLOAD 10 kΩ) | AVOL | 88 | 110 | | dB | VOUT = 0.3V to 4.7V, RLOAD = 10 kΩ to V+/2 | 4 |
| Open Loop Voltage Gain (5V table, RLOAD 10 kΩ, temperature extremes) | AVOL | 84 | | | dB | VOUT = 0.3V to 4.7V, RLOAD = 10 kΩ to V+/2 | 4 |
| Output Voltage Swing High (5V table, RLOAD 2 kΩ) | | | 35 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 4 |
| Output Voltage Swing High (5V table, RLOAD 2 kΩ, temperature extremes) | | | | 82 | mV | RLOAD = 2 kΩ to V+/2 | 4 |
| Output Voltage Swing High (5V table, RLOAD 10 kΩ) | | | 25 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 4 |
| Output Voltage Swing High (5V table, RLOAD 10 kΩ, temperature extremes) | | | | 71 | mV | RLOAD = 10 kΩ to V+/2 | 4 |
| Output Voltage Swing Low (5V table, RLOAD 2 kΩ) | | | 42 | 75 | mV | RLOAD = 2 kΩ to V+/2 | 4 |
| Output Voltage Swing Low (5V table, RLOAD 2 kΩ, temperature extremes) | | | | 78 | mV | RLOAD = 2 kΩ to V+/2 | 4 |
| Output Voltage Swing Low (5V table, RLOAD 10 kΩ) | | | 20 | 65 | mV | RLOAD = 10 kΩ to V+/2 | 4 |
| Output Voltage Swing Low (5V table, RLOAD 10 kΩ, temperature extremes) | | | | 67 | mV | RLOAD = 10 kΩ to V+/2 | 4 |
| Output Current Sourcing (5V table) | IOUT | 45 | 60 | | mA | VIN = 200 mV | 4 |
| Output Current Sourcing (5V table, temperature extremes) | IOUT | 37 | | | mA | VIN = 200 mV | 4 |
| Output Current Sinking (5V table) | IOUT | 10 | 21 | | mA | VIN = −200 mV | 4 |
| Supply Current per Amplifier (5V table) | IS | | 1.15 | 1.4 | mA | per channel | 4 |
| Supply Current per Amplifier (5V table, temperature extremes) | IS | | | 1.75 | mA | per channel | 4 |
| VIN Differential | VIN | -0.3 | | 0.3 | V | | 2 |
| Supply Voltage (V+, V−) | V+, V− | | | 6 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Temperature Range | | -40 | | 125 | °C | | 2 |
| Supply Voltage (V+, V−) | V+, V− | 2 | | 5.5 | V | −40°C ≤ TA ≤ 125°C | 2 |
| Supply Voltage (V+, V−) | V+, V− | 1.8 | | 5.5 | V | 0°C ≤ TA ≤ 125°C | 2 |
| Package Thermal Resistance (θJA), 5-Pin SOT-23 | θJA | | 180 | | °C/W | 5-Pin SOT-23 | 2 |
## CAD (KiCad official)
- Symbol: `LMV796QMFX`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lmv796qmfx-etched.step` / `lmv796qmfx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmv796qmfx.step` / `lmv796qmfx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmv796.pdf) (32 pp, sha256 `42726005a805f114`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmv796qmfx-datasheet.pdf)