component
LMV792MM
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMV792MM
Texas Instruments · Operational Amplifier · VSSOP-10-0.5mm
LMV792MM from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; the datasheet gives no specific voltage or current limit for this pin, only the pin function. Output swings rail-to-rail and sources up to about 47 mA at 2.5 V (typical) or 60 mA at 5 V (typical), per the electrical characteristics. |
| 2 | IN A- | input | Inverting input of amplifier A; the common-mode range includes the negative rail, allowing single-supply sensing to ground. |
| 3 | IN A+ | input | Non-inverting input of amplifier A; the common-mode range includes the negative rail, allowing single-supply sensing to ground. |
| 4 | V- | power_in | Negative (lowest) power supply voltage; supply span is 1.8 V to 5.5 V with the total supply limited to 6 V absolute maximum. |
| 5 | EN A | input | Enable pin for amplifier A; the amplifier powers on when this pin is above V+ − 0.5 V and shuts down when it is below V− + 0.5 V. |
| 6 | EN B | input | Enable pin for amplifier B; the amplifier powers on when this pin is above V+ − 0.5 V and shuts down when it is below V− + 0.5 V. |
| 7 | IN B+ | input | Non-inverting input of amplifier B; the common-mode range includes the negative rail, allowing single-supply sensing to ground. |
| 8 | IN B- | input | Inverting input of amplifier B; the common-mode range includes the negative rail, allowing single-supply sensing to ground. |
| 9 | OUT B | output | Output of amplifier B; the datasheet gives no specific voltage or current limit for this pin, only the pin function. Output swings rail-to-rail and sources up to about 47 mA at 2.5 V (typical) or 60 mA at 5 V (typical), per the electrical characteristics. |
| 10 | V+ | power_in | Positive (highest) power supply voltage; supply span is 1.8 V to 5.5 V with the total supply limited to 6 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LMV792MM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lmv792mm-etched.step/lmv792mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv792mm.step/lmv792mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
aff4a47354f644c1, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).