main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv721am5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv721am5-etched.fit.json lmv721am5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv721am5-etched.glb lmv721am5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv721am5-etched.step lmv721am5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv721am5.glb Publish 0.1.0 · Ray
lmv721am5.kicad_mod Publish 0.1.0 · Ray
lmv721am5.kicad_sym Publish 0.1.0 · Ray
lmv721am5.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv721am5.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json lmv721am5: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmv721am5: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMV721AM5

HGSEMI · Operational Amplifier · SOT-23-5

LMV721AM5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Op-amp output. Rail-to-rail swing, drives up to about 70 mA (typ) into the load; output impedance ~7.5 ohm at 100 kHz, G=1.
2 VSS power_in Negative supply / ground reference. Typically tied to GND in single-supply operation. Supply range VDD-VSS = 2.1 V to 5.5 V (absolute max 7.5 V).
3 IN+ input Non-inverting analog input. Rail-to-rail common-mode range (-0.1 V to VDD+0.1 V typ at Vs=5.5 V). Input bias current ~1 pA (typ).
4 IN- input Inverting analog input. Rail-to-rail common-mode range. Input voltage must stay within Vss-0.5 V to VDD+0.5 V (absolute max).
5 VDD power_in Positive supply pin. Operating range 2.1 V to 5.5 V (VDD-VSS); absolute max 7.5 V. Quiescent current ~1.1 mA typ.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LMV721AM5/TR
  • LMV721AM5AM7/TR
  • LMV721AM5AM/TR
  • LMV721AM5AMM/TR

CAD (KiCad official)

  • Symbol: LMV721AM5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lmv721am5-etched.step / lmv721am5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv721am5.step / lmv721am5.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv721am5.step 85 KB You want the bare part, or you mark your own boards.
lmv721am5-etched.step 1.3 MB You want the part with LMV721AM5 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 336 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (16 pp, sha256 7e115f1c0577785c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF