main
History Download
Ray Publish 0.1.0 e0e1add

LMV604MTX

Texas Instruments · Operational Amplifier · TSSOP-14

LMV604MTX from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of channel A; for the LMV604 at 2.7 V the datasheet gives output short-circuit current of 24 mA sourcing and 24 mA sinking.
2 -INA input Inverting input of channel A.
3 +INA input Noninverting input of channel A; the PMOS input stage allows the input common-mode range to include ground.
4 V+ power_in Positive (highest) power supply; the recommended supply range is 2.7 V to 5.5 V and (V+) - (V-) must not exceed 6 V.
5 +INB input Noninverting input of channel B; the PMOS input stage allows the input common-mode range to include ground.
6 -INB input Inverting input of channel B.
7 OUTB output Output of channel B; for the LMV604 at 2.7 V the datasheet gives output short-circuit current of 24 mA sourcing and 24 mA sinking.
8 OUTC output Output of channel C; for the LMV604 at 2.7 V the datasheet gives output short-circuit current of 24 mA sourcing and 24 mA sinking.
9 -INC input Inverting input of channel C.
10 +INC input Noninverting input of channel C; the PMOS input stage allows the input common-mode range to include ground.
11 V- power_in Negative (lowest) power supply, 0 V in the datasheet test conditions; both V+ and V- must be bypassed in dual-supply operation.
12 +IND input Noninverting input of channel D; the PMOS input stage allows the input common-mode range to include ground.
13 -IND input Inverting input of channel D.
14 OUTD output Output of channel D; for the LMV604 at 2.7 V the datasheet gives output short-circuit current of 24 mA sourcing and 24 mA sinking.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (DC, V+ = 2.7 V), LMV602 and LMV604 VOS 0.55 5 mV 6
Supply current per amplifier (DC, V+ = 2.7 V) IS 100 170 µA 6
Input common-mode voltage (DC, V+ = 2.7 V) VCM 0 1.7 V For CMRR ≥ 50 dB 6
Output swing high (DC, V+ = 2.7 V) VO 5 30 mV RL = 10 kΩ to 1.35 V 6
Output swing low (DC, V+ = 2.7 V) VO 5.3 30 mV RL = 10 kΩ to 1.35 V 6
Input offset voltage (DC, V+ = 5 V), LMV602 and LMV604 VOS 0.7 5 mV 7
Supply current per amplifier (DC, V+ = 5 V) IS 107 200 µA 7
Input common-mode voltage (DC, V+ = 5 V) VCM 0 4 V For CMRR ≥ 50 dB 7
Output swing high (DC, V+ = 5 V) VO 7 30 mV RL = 10 kΩ to 2.5 V 7
Output swing low (DC, V+ = 5 V) VO 7 30 mV RL = 10 kΩ to 2.5 V 7
Absolute maximum supply voltage (V+), (V-) 6 V 5
Absolute maximum junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Recommended supply voltage 2.7 5.5 V 5
Recommended operating free-air temperature -40 125 °C 5
Input offset voltage average drift (DC, V+ = 2.7 V) TCVOS 1.7 µV/°C 6
Input bias current (DC, V+ = 2.7 V) IB 0.02 pA 6
Input offset current (DC, V+ = 2.7 V) IOS 6.6 fA 6
Common-mode rejection ratio (DC, V+ = 2.7 V) CMRR 80 dB 0 V ≤ VCM ≤ 1.7 V 6
Power supply rejection ratio (DC, V+ = 2.7 V) PSRR 82 dB 2.7 V ≤ V+ ≤ 5 V 6
Large signal voltage gain (DC, V+ = 2.7 V) AV 113 dB RL = 10 kΩ to 1.35 V 6
Output short-circuit current sourcing, LMV604 (DC, V+ = 2.7 V) IO 24 mA 6
Output short-circuit current sinking (DC, V+ = 2.7 V) IO 24 mA 6
Input offset voltage average drift (DC, V+ = 5 V) TCVOS 1.9 µV/°C 7
Input bias current (DC, V+ = 5 V) IB 0.02 pA 7
Input offset current (DC, V+ = 5 V) IOS 6.6 fA 7
Common-mode rejection ratio (DC, V+ = 5 V) CMRR 86 dB 0 V ≤ VCM ≤ 4 V 7
Power supply rejection ratio (DC, V+ = 5 V) PSRR 82 dB 2.7 V ≤ V+ ≤ 5 V 7
Large signal voltage gain (DC, V+ = 5 V) AV 116 dB RL = 10 kΩ to 2.5 V 7
Output short-circuit current sourcing (DC, V+ = 5 V) IO 113 mA 7
Output short-circuit current sinking (DC, V+ = 5 V) IO 75 mA 7
Slew rate (AC, V+ = 2.7 V) SR 1 V/µs RL = 10 kΩ 6
Gain bandwidth product (AC, V+ = 2.7 V) GBW 1 MHz RL = 100 kΩ, CL = 200 pF 6
Phase margin (AC, V+ = 2.7 V) Φm 72 deg RL = 100 kΩ 6
Gain margin (AC, V+ = 2.7 V) Gm 20 dB RL = 100 kΩ 6
Input-referred voltage noise (AC, V+ = 2.7 V) en 40 nV/√Hz f = 1 kHz 6
Input-referred current noise (AC, V+ = 2.7 V) in 0.001 pA/√Hz f = 1 kHz 6
Total harmonic distortion (AC, V+ = 2.7 V) THD 0.017 % f = 1 kHz, AV = 1, RL = 600 Ω, VIN = 1 VPP 6
Slew rate (AC, V+ = 5 V) SR 1 V/µs RL = 10 kΩ 7
Gain bandwidth product (AC, V+ = 5 V) GBW 1 MHz RL = 100 kΩ, CL = 200 pF 7
Phase margin (AC, V+ = 5 V) Φm 72 ° RL = 100 kΩ 7
Gain margin (AC, V+ = 5 V) Gm 20 dB RL = 100 kΩ 7
Input-referred voltage noise (AC, V+ = 5 V) en 39 nV/√Hz f = 1 kHz 7
Input-referred current noise (AC, V+ = 5 V) in 0.001 pA/√Hz f = 1 kHz 7
Total harmonic distortion (AC, V+ = 5 V) THD 0.012 % f = 1 kHz, AV = 1, RL = 600 Ω, VIN = 1 VPP 7
Junction-to-ambient thermal resistance, PW (TSSOP-14) RθJA 123.8 °C/W 5
Junction-to-case (top) thermal resistance, PW (TSSOP-14) RθJC(top) 50.5 °C/W 5
Junction-to-board thermal resistance, PW (TSSOP-14) RθJB 66.2 °C/W 5
Junction-to-top characterization parameter, PW (TSSOP-14) ψJT 6.3 °C/W 5
Junction-to-board characterization parameter, PW (TSSOP-14) ψJB 65.6 °C/W 5

CAD (KiCad official)

  • Symbol: LMV604MTX
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lmv604mtx-etched.step / lmv604mtx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv604mtx.step / lmv604mtx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 390ed56baf9d4842, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF