main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv393idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv393idr-etched.fit.json lmv393idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393idr-etched.glb lmv393idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393idr-etched.step lmv393idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393idr.glb Publish 0.1.0 · Ray
lmv393idr.kicad_mod Publish 0.1.0 · Ray
lmv393idr.kicad_sym Publish 0.1.0 · Ray
lmv393idr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv393idr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json lmv393idr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmv393idr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMV393IDR

Texas Instruments · Comparators · SOIC-8

LMV393IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Comparator 1 output. Open-collector; requires an external pull-up resistor to VCC+ (or another rail up to VCC+ +0.3V). Sinks up to 23mA typical with VSAT ≈ 150mV at 1.5mA.
2 1IN- input Comparator 1 inverting input. Common-mode range −0.1V to (VCC+ − ~1V); IB ≈ 5nA typical (250nA max at 25°C).
3 1IN+ input Comparator 1 non-inverting input. Common-mode range −0.1V to (VCC+ − ~1V); differential input voltage rated ±5.5V.
4 GND power_in Device ground / negative supply rail. Return for both comparator channels; must be the reference for all input voltage measurements.
5 2IN+ input Comparator 2 non-inverting input. Common-mode range −0.1V to (VCC+ − ~1V); differential input voltage rated ±5.5V.
6 2IN- input Comparator 2 inverting input. Common-mode range −0.1V to (VCC+ − ~1V); IB ≈ 5nA typical (250nA max at 25°C).
7 2OUT output Comparator 2 output. Open-collector; requires an external pull-up resistor. Output leakage ≤1µA over temp; sinks up to 23mA typical.
8 VCC+ power_in Positive supply rail. Recommended 2.7V to 5.5V single-supply operation; absolute max 5.5V. Typical supply current 50µA (140µA max) for both comparators.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMV393IDR
  • LMV393IDRPW
  • LMV393IDRPWR
  • LMV393IDRDGK
  • LMV393IDRDGKR
  • LMV393IDRDDU

CAD (KiCad official)

  • Symbol: LMV393IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lmv393idr-etched.step / lmv393idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv393idr.step / lmv393idr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv393idr.step 122 KB You want the bare part, or you mark your own boards.
lmv393idr-etched.step 1.9 MB You want the part with LMV393IDR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 477 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 174a310f6a5803a6, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF