LMV358TP-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	Out A	output	Amplifier A output; voltage range extends to within millivolts of each supply rail.
2	-In A	input	Amplifier A inverting input; voltage range can go from V- - 0.1V to V+ + 0.1V.
3	+In A	input	Amplifier A non-inverting input; same voltage range as -IN (V- - 0.1V to V+ + 0.1V).
4	-VS	power_in	Negative power supply, normally tied to ground; V+ to V- must be 2.1V to 5.25V, bypass with 0.1µF if not grounded.
5	+In B	input	Amplifier B non-inverting input; same voltage range as -IN (V- - 0.1V to V+ + 0.1V).
6	-In B	input	Amplifier B inverting input; voltage range can go from V- - 0.1V to V+ + 0.1V.
7	Out B	output	Amplifier B output; voltage range extends to within millivolts of each supply rail.
8	+VS	power_in	Positive power supply, typically 2.1V to 5.25V, with a 0.1µF bypass capacitor placed as close to the part as possible.

Key specifications

Parameter	Value
Manufacturer	3PEAK
Package	MSOP-8
Category	Amplifiers
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS	-3.5	0.1	3.5	mV	VCM = VSUPPLY/2, VSUPPLY = 5V	3
Common Mode Rejection Ratio	CMRR	80	110		dB	VCM = 0.1V to 4.9V	3
Common-mode Input Voltage Range	VCM	-0.1		5.1	V	VSUPPLY = 5V	3
Power Supply Rejection Ratio	PSRR	80	102		dB	VSUPPLY = 5V	3
Open-Loop Large Signal Gain	AVOL	80	102		dB	VOUT = 2.5V, RLOAD = 100kΩ	3
Open-Loop Large Signal Gain	AVOL	72	102		dB	VOUT = 0.1V to 4.9V, RLOAD = 100kΩ	3
Quiescent Current per Amplifier	IQ		40	51	μA	VSUPPLY = 5V	3
Input Voltage		-0.2		0.2	V	V-, 0.2 to V+ + 0.2	2
Input Current		-10		10	mA	+IN, -IN, SHDN	2
Output Current		-45		45	mA	OUT	2
Operating Temperature Range		-40		125	°C		2
Maximum Junction Temperature				150	°C		2
Storage Temperature Range		-65		150	°C		2
Lead Temperature				260	°C	Soldering, 10 sec	2
HBM ESD	HBM	8			kV	MIL-STD-883H Method 3015.8, minimum level	2
MM ESD	MM	500			V	JEDEC-EIA/JESD22-A115, minimum level	2
CDM ESD	CDM	2			kV	JEDEC-EIA/JESD22-C101E, minimum level	2
Input Offset Voltage Drift	VOS TC		0.6		μV/° C		3
Input Bias Current	IB		1		pA		3
Input Offset Current	IOS		1		pA		3
Output Swing from Supply Rail	VOL		5		mV	RLOAD = 100kΩ	3
Output Short-Circuit Current	ISC		45		mA	Sink or source current	3
Gain-Bandwidth Product	GBWP		1.27		MHz	f = 1kHz	3
Slew Rate	SR		0.9		V/μs	AV = 1, VOUT = 1.5V to 3.5V, CLOAD = 100pF, RLOAD = 100kΩ	3
Phase Margin	PM		66		0	RLOAD = 100kΩ, CLOAD = 100pF	3

CAD (KiCad official)

Symbol: LMV358TP-VR
Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
3D model: MSOP-8 (KiCad packages3D, STEP)
3D model files: lmv358tp-vr-etched.step / lmv358tp-vr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv358tp-vr.step / lmv358tp-vr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: 3PEAK datasheet (16 pp, sha256 d0ff525fdd9ada32, retrieved 2026-10-31, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LMV358TP-VR

Verified LMV358TP-VR

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README