main
History Download
Ray Publish 0.1.0 6ff9af3

LMV358QDR

Texas Instruments · Operational Amplifier · SOIC-8

LMV358QDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output of amplifier 1, with rail-to-rail output swing; the datasheet states the output short-circuit duration to ground is unlimited at or below TA = 25°C with VCC ≤ 5.5 V, and shorts from the output to VCC can cause excessive heating and destruction.
2 1IN- input Inverting input of amplifier 1; absolute input voltage range (either input) is -0.2 V to 5.7 V.
3 1IN+ input Noninverting input of amplifier 1; absolute input voltage range (either input) is -0.2 V to 5.7 V, and the common-mode input range includes ground.
4 GND power_in Negative supply (network ground); all voltages in the absolute maximum ratings are referenced to this pin.
5 2IN+ input Noninverting input of amplifier 2; absolute input voltage range (either input) is -0.2 V to 5.7 V, and the common-mode input range includes ground.
6 2IN- input Inverting input of amplifier 2; absolute input voltage range (either input) is -0.2 V to 5.7 V.
7 2OUT output Output of amplifier 2, with rail-to-rail output swing; the datasheet states the output short-circuit duration to ground is unlimited at or below TA = 25°C with VCC ≤ 5.5 V, and shorts from the output to VCC can cause excessive heating and destruction.
8 VCC+ power_in Positive supply; recommended single-supply range is 2.7 V to 5.5 V, with an absolute maximum of 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Recommended supply voltage (single-supply operation) VCC 2.7 5.5 V 5
Operating free-air temperature (Q temperature) TA -40 125 °C Q temperature 5
Supply voltage VCC 5.5 V 5
Differential input voltage VID -5.5 5.5 V 5
Input voltage range (either input) VI -0.2 5.7 V 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Junction-to-ambient thermal resistance (D, SOIC) RθJA 207.9 °C/W D (SOIC) package 6
Input offset voltage VIO 1.7 7 mV VCC+ = 2.7 V, TA = 25°C 6
Input bias current IIB 11 250 nA VCC+ = 2.7 V, TA = 25°C 6
Input offset current IIO 5 50 nA VCC+ = 2.7 V, TA = 25°C 6
Common-mode rejection ratio CMRR 50 63 dB VCC+ = 2.7 V, TA = 25°C, VCM = 0 to 1.7 V 6
Supply-voltage rejection ratio kSVR 50 60 dB VCC+ = 2.7 V, TA = 25°C, VCC = 2.7 V to 5 V, VO = 1 V 6
Common-mode input voltage range, low limit VICR -0.2 0 V VCC+ = 2.7 V, TA = 25°C, CMRR ≥ 50 dB 6
Common-mode input voltage range, high limit VICR 1.7 1.9 V VCC+ = 2.7 V, TA = 25°C, CMRR ≥ 50 dB 6
Output swing, low level VO 60 180 mV VCC+ = 2.7 V, TA = 25°C, RL = 10 kΩ to 1.35 V, low level 6
Supply current, LMV358I (both amplifiers) ICC 140 340 μA VCC+ = 2.7 V, TA = 25°C 6
Average temperature coefficient of input offset voltage αVIO 5 μV/°C VCC+ = 2.7 V, TA = 25°C 6
Unity-gain bandwidth B1 1 MHz VCC+ = 2.7 V, CL = 200 pF 6
Phase margin Φm 60 deg VCC+ = 2.7 V 6
Gain margin Gm 10 dB VCC+ = 2.7 V 6
Equivalent input noise voltage Vn 46 nV/√Hz VCC+ = 2.7 V, f = 1 kHz 6
Equivalent input noise current In 0.17 pA/√Hz VCC+ = 2.7 V, f = 1 kHz 6
Input offset voltage VIO 1.7 7 mV VCC+ = 5 V, TA = 25°C 7
Input offset voltage VIO 9 mV VCC+ = 5 V, TA = -40°C to +125°C 7
Input bias current IIB 15 250 nA VCC+ = 5 V, TA = 25°C 7
Input bias current IIB 500 nA VCC+ = 5 V, TA = -40°C to +125°C 7
Input offset current IIO 5 50 nA VCC+ = 5 V, TA = 25°C 7
Input offset current IIO 150 nA VCC+ = 5 V, TA = -40°C to +125°C 7
Common-mode rejection ratio CMRR 50 65 dB VCC+ = 5 V, TA = 25°C, VCM = 0 to 4 V 7
Supply-voltage rejection ratio kSVR 50 60 dB VCC+ = 5 V, TA = 25°C, VCC = 2.7 V to 5 V, VO = 1 V, VCM = 1 V 7
Common-mode input voltage range, low limit VICR -0.2 0 V VCC+ = 5 V, CMRR ≥ 50 dB, TA = 25°C 7
Common-mode input voltage range, high limit VICR 4 4.2 V VCC+ = 5 V, CMRR ≥ 50 dB, TA = 25°C 7
Output swing, low level, RL = 2 kΩ VO 120 300 mV VCC+ = 5 V, TA = 25°C, low level 7
Output swing, low level, RL = 2 kΩ VO 400 mV VCC+ = 5 V, TA = -40°C to +125°C, low level 7
Output swing, low level, RL = 10 kΩ VO 65 180 mV VCC+ = 5 V, TA = 25°C, low level 7
Output swing, low level, RL = 10 kΩ VO 280 mV VCC+ = 5 V, TA = -40°C to +125°C, low level 7
Large-signal differential voltage gain AVD 15 100 V/mV VCC+ = 5 V, RL = 2 kΩ, TA = 25°C 7
Large-signal differential voltage gain AVD 10 V/mV VCC+ = 5 V, RL = 2 kΩ, TA = -40°C to +125°C 7
Output short-circuit current, sourcing IOS 5 40 mA VCC+ = 5 V, Sourcing, VO = 0 V, TA = 25°C 7
Output short-circuit current, sinking IOS 10 40 mA VCC+ = 5 V, Sinking, VO = 5 V, TA = 25°C 7
Supply current, LMV358I (both amplifiers) ICC 210 440 μA VCC+ = 5 V, TA = 25°C 7
Supply current, LMV358I (both amplifiers) ICC 615 μA VCC+ = 5 V, TA = -40°C to +125°C 7
Average temperature coefficient of input offset voltage αVIO 5 μV/°C VCC+ = 5 V, TA = 25°C 7
Unity-gain bandwidth B1 1 MHz VCC+ = 5 V, CL = 200 pF, TA = 25°C 7
Phase margin Φm 60 deg VCC+ = 5 V, TA = 25°C 7
Gain margin Gm 10 dB VCC+ = 5 V, TA = 25°C 7
Equivalent input noise voltage Vn 39 nV/√Hz VCC+ = 5 V, f = 1 kHz, TA = 25°C 7
Equivalent input noise current In 0.21 pA/√Hz VCC+ = 5 V, f = 1 kHz, TA = 25°C 7
Slew rate SR 1 V/μs VCC+ = 5 V, TA = 25°C 7

CAD (KiCad official)

  • Symbol: LMV358QDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lmv358qdr-etched.step / lmv358qdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv358qdr.step / lmv358qdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 3d4cf8ec2ba5554d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF