main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv358mr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv358mr-etched.fit.json lmv358mr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv358mr-etched.glb lmv358mr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
lmv358mr-etched.step lmv358mr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
lmv358mr.glb Publish 0.1.0 · Ray
lmv358mr.kicad_mod Publish 0.1.0 · Ray
lmv358mr.kicad_sym Publish 0.1.0 · Ray
lmv358mr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv358mr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json lmv358mr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
README.md lmv358mr: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray

LMV358MR

COSINE · Operational Amplifier · MSOP-8

LMV358MR from COSINE, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of amplifier A. Rail-to-rail output; swings to within ~10 mV of each supply rail with a 10 kΩ load.
2 -IN1 input Inverting input of amplifier A. Common-mode input range: -Vs - 0.3 V to +Vs - 1 V. Input terminals are diode-clamped to the supply rails.
3 +IN1 input Non-inverting input of amplifier A. Same input voltage range as -IN1.
4 -Vs power_in Negative power supply or ground. For single-supply operation tie to GND; for dual-supply operation bypass to ground with a 0.1 µF ceramic capacitor placed close to the pin. Total supply (+Vs to -Vs) range 2.1 V to 5.5 V.
5 +IN2 input Non-inverting input of amplifier B. Same input voltage range as -IN2.
6 -IN2 input Inverting input of amplifier B. Common-mode input range: -Vs - 0.3 V to +Vs - 1 V. Input terminals are diode-clamped to the supply rails.
7 OUTB output Output of amplifier B. Rail-to-rail output; swings to within ~10 mV of each supply rail with a 10 kΩ load.
8 +Vs power_in Positive power supply, 2.1 V to 5.5 V (single-supply) or +1.05 V to +2.75 V (dual-supply). Bypass with a 0.1 µF ceramic capacitor placed as close to the pin as possible; a 2.2 µF tantalum may be added for better performance.

Key specifications

Parameter Value
Manufacturer COSINE
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMV358MR
  • LMV358MRSR
  • LMV358MRTR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Supply Voltage 2.1 5.5 V 3
Operating Ambient Temperature -40 85 °C 3
Power Supply: +Vs to -Vs 6 V 3
Input Current 10 mA Input signals swinging more than 0.5V beyond the supply rails should be current-limited 3
Storage Temperature Range -65 150 °C 3
Junction Temperature 150 °C 3
Operating Temperature Range -40 125 °C 3
ESD Susceptibility, HBM 2000 V HBM 3
Operating Voltage Range 2.1 5.5 V 4
Input Offset Voltage VOS 1 5 mV 4
Common-Mode Voltage Range VCM -0.1 4.5 V VS = 5.5V 4
Power Supply Rejection Ratio PSRR 80 100 dB VS = +2.1V to +5.5V 4
Input Offset Voltage Drift ΔVOS/ΔT 5 μV/°C -40 to 125°C 4
Input Bias Current IB 2.5 pA 4
Input Offset Current IOS 2.5 pA 4
Common-Mode Rejection Ratio CMRR 125 dB VCM =0.1V to 4.5V 4
Open-Loop Voltage Gain AOL 120 dB VO=0.2V to 4.5V 4
Output Voltage Swing from Rail 1 mV RL=100kΩ 4
Output Voltage Swing from Rail 10 mV RL=10kΩ 4
Output Voltage Swing from Rail 40 mV RL=2kΩ 4
Short-Circuit Current, Sourcing ISR 45 mA Sourcing 4
Short-Circuit Current, Sinking ISK 50 mA Sinking 4
Quiescent Current / Amplifier IQ 85 μA 4
Gain Bandwidth Product GBWP 1.5 MHz G=+1 4
Slew Rate SR 1 V/μs G = +1 , 2V Output Step 4
Voltage Noise Density en 28 nV/√Hz f=1kHz 4
Package Thermal Resistance, junction-to-ambient RθJA 206 °C/W MSOP8 package 3

CAD (KiCad official)

  • Symbol: LMV358MR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmv358mr-etched.step / lmv358mr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv358mr.step / lmv358mr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv358mr.step 123 KB You want the bare part, or you mark your own boards.
lmv358mr-etched.step 1.8 MB You want the part with LMV358MR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 448 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: COSINE datasheet (10 pp, sha256 86daccf19e245711, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF