component
LMV341IDCKR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLMV341IDCKR
Texas Instruments · Operational Amplifier · SC-70-6
LMV341IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Channel 1 non-inverting input; the PMOS input stage's input range extends from ground up to V+ - 1 V (section 6.3.1). |
| 2 | GND | power_in | Ground reference pin for the device (section 4, Table 4-1). |
| 3 | IN- | input | Channel 1 inverting input; the same PMOS input range applies, from ground up to V+ - 1 V (section 6.3.1). |
| 4 | OUT | output | Channel 1 output from a CMOS rail-to-rail stage; absolute maximum output voltage is -0.3 V to VCC + 0.3 V. |
| 5 | SHDN | input | Active-low shutdown: at GND the supply current falls to near zero and the output goes high-impedance, while V+ or an open pin keeps the device on; recommended shutdown-pin levels are 0 to 0.2 V (off) and 2.4 V (2.7 V supply) or 4.5 V (5 V supply) minimum (on). |
| 6 | V+ | power_in | Positive supply; recommended single-supply range is 2.5 V to 5.5 V, with an absolute maximum of 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LMV341IDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
lmv341idckr-etched.step/lmv341idckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv341idckr.step/lmv341idckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
04193696ef50d1c0, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).