main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv331idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv331idckr-etched.fit.json lmv331idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv331idckr-etched.glb lmv331idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv331idckr-etched.step lmv331idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv331idckr.glb Publish 0.1.0 · Ray
lmv331idckr.kicad_mod Publish 0.1.0 · Ray
lmv331idckr.kicad_sym Publish 0.1.0 · Ray
lmv331idckr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv331idckr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json lmv331idckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmv331idckr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMV331IDCKR

Texas Instruments · Comparators · SC-70-5

LMV331IDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Non-inverting comparator input. Common-mode input voltage range extends from -0.1 V to (VCC+ - 1.5 V); input bias current 15 nA typ (250 nA max) at VCC+ = 2.7 V.
2 GND power_in Ground / negative supply reference (0 V). Single-supply operation with VCC+ referenced to this pin.
3 IN- input Inverting comparator input. Differential input voltage rating ±5.5 V; common-mode input voltage range includes ground.
4 OUT output Open-collector comparator output. Requires an external pull-up resistor to VCC+ (typ RL = 5.1 kΩ). Sinks up to 23 mA typ at VCC+ = 2.7 V; saturation voltage 200 mV typ at IO ≤ 1.5 mA.
5 VCC+ power_in Positive supply. Single-supply operating range 2.7 V to 5.5 V; absolute maximum 5.5 V. Typical supply current 40 µA at VCC+ = 2.7 V, 60 µA at VCC+ = 5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LMV331IDCKR
  • LMV331IDCKT
  • LMV331IDCKRIDBVR
  • LMV331IDCKRIDBVT

CAD (KiCad official)

  • Symbol: LMV331IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: lmv331idckr-etched.step / lmv331idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv331idckr.step / lmv331idckr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv331idckr.step 87 KB You want the bare part, or you mark your own boards.
lmv331idckr-etched.step 1.9 MB You want the part with LMV331IDCKR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 475 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f16c28a91f97444c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF