component
LMV324TP-TR
Public Made by Adomby adom
3PEAK Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMV324TP-TR
3PEAK · Operational Amplifier · TSSOP-14
LMV324TP-TR from 3PEAK, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Amplifier A output; voltage range extends to within millivolts of each supply rail. |
| 2 | -In A | input | Amplifier A inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 3 | +In A | input | Amplifier A non-inverting input; same voltage range as -IN (V- - 0.1V to V+ + 0.1V). |
| 4 | +VS | power_in | Positive power supply, typically 2.1V to 5.25V between V+ and V-, with a 0.1µF bypass capacitor placed close to the part. |
| 5 | +In B | input | Amplifier B non-inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 6 | -In B | input | Amplifier B inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 7 | Out B | output | Amplifier B output; voltage range extends to within millivolts of each supply rail. |
| 8 | Out C | output | Amplifier C output; voltage range extends to within millivolts of each supply rail. |
| 9 | -In C | input | Amplifier C inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 10 | +In C | input | Amplifier C non-inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 11 | -VS | power_in | Negative power supply, normally tied to ground; V+ to V- must be 2.1V to 5.25V, with a 0.1µF bypass capacitor if not grounded. |
| 12 | +In D | input | Amplifier D non-inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 13 | -In D | input | Amplifier D inverting input; voltage range from V- - 0.1V to V+ + 0.1V. |
| 14 | Out D | output | Amplifier D output; voltage range extends to within millivolts of each supply rail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | TSSOP-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3.5 | 3.5 | mV | VCM = VSUPPLY/2, over full temperature range | 3 | |
| Common Mode Rejection Ratio | CMRR | 80 | 110 | dB | VCM = 0.1V to 4.9V | 3 | |
| Common-mode Input Voltage Range | VCM | -0.1 | 5.1 | V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 80 | 102 | dB | 3 | ||
| Open-Loop Large Signal Gain | AVOL | 80 | 102 | dB | VOUT = 2.5V, RLOAD = 100kΩ | 3 | |
| Open-Loop Large Signal Gain | AVOL | 72 | 102 | dB | VOUT = 0.1V to 4.9V, RLOAD = 100kΩ | 3 | |
| Quiescent Current per Amplifier | IQ | 40 | 51 | μA | VSUPPLY = 5V | 3 | |
| Absolute Max Input Current | -10 | 10 | mA | +IN, -IN, SHDN | 2 | ||
| Absolute Max Output Current | -45 | 45 | mA | OUT | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Supply Voltage Range | VS | 2.1 | 6 | V | Single supply | 1 | |
| Input Offset Voltage Drift | VOS TC | 0.6 | μV/° C | 3 | |||
| Input Bias Current | IB | 1 | pA | 3 | |||
| Input Offset Current | IOS | 1 | pA | 3 | |||
| Gain-Bandwidth Product | GBWP | 1.27 | MHz | f = 1kHz | 3 | ||
| Slew Rate | SR | 0.9 | V/μs | AV = 1, VOUT = 1.5V to 3.5V, CLOAD = 100pF, RLOAD = 100kΩ | 3 | ||
| Output Swing from Supply Rail | VOL | 5 | mV | RLOAD = 100kΩ | 3 | ||
| Output Short-Circuit Current | ISC | 45 | mA | Sink or source current | 3 |
CAD (KiCad official)
- Symbol:
LMV324TP-TR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lmv324tp-tr-etched.step/lmv324tp-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv324tp-tr.step/lmv324tp-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (16 pp, sha256
d0ff525fdd9ada32, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).