main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv324adtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lmv324adtr: viewers · Ray
lmv324adtr-etched.fit.json lmv324adtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv324adtr-etched.glb lmv324adtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv324adtr-etched.step lmv324adtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv324adtr.glb Publish 0.1.0 · Ray
lmv324adtr.kicad_mod Publish 0.1.0 · Ray
lmv324adtr.kicad_sym Publish 0.1.0 · Ray
lmv324adtr.lbr Publish 0.1.0 · Ray
lmv324adtr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lmv324adtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmv324adtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMV324ADTR

XBLW · Operational Amplifier · SOP-14

LMV324ADTR from XBLW, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail output swing capable of driving heavy loads (VOH = VS+ - 8mV, VOL = 8mV with 10kOhm load).
2 -INA input Inverting input of amplifier A. Common-mode voltage range extends from VS- - 0.1V to VS+ + 0.1V (rail-to-rail input).
3 +INA input Non-inverting input of amplifier A. Same rail-to-rail common-mode range as -IN (VS- - 0.1V to VS+ + 0.1V).
4 +VS power_in Positive power supply, 2.3V to 5.5V. Split supplies are allowed provided VS+ to VS- stays within 2.3V-5.5V. Bypass with 0.1uF close to the pin.
5 +INB input Non-inverting input of amplifier B. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
6 -INB input Inverting input of amplifier B. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
7 OUTB output Amplifier B output. Rail-to-rail output swing; short-circuit source/sink current ~40mA.
8 OUTC output Amplifier C output. Rail-to-rail output swing capable of driving 10kOhm loads to within 8mV of the supply rails.
9 -INC input Inverting input of amplifier C. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
10 +INC input Non-inverting input of amplifier C. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
11 -VS power_in Negative power supply, normally tied to ground. May be biased below ground provided VS+ to VS- stays within 2.3V-5.5V. Bypass with 0.1uF close to the pin.
12 +IND input Non-inverting input of amplifier D. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
13 -IND input Inverting input of amplifier D. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V).
14 OUTD output Amplifier D output. Rail-to-rail output swing; short-circuit source/sink current ~40mA.

Key specifications

Parameter Value
Manufacturer XBLW
Package SOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • LMV324ADTR
  • LMV324ADTRATDTR

CAD (KiCad official)

  • Symbol: LMV324ADTR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: lmv324adtr-etched.step / lmv324adtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv324adtr.step / lmv324adtr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv324adtr.step 195 KB You want the bare part, or you mark your own boards.
lmv324adtr-etched.step 2.0 MB You want the part with LMV324ADTR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 535 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XBLW datasheet (18 pp, sha256 89ce10171c639b50, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF