main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv301mgx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv301mgx-etched.fit.json lmv301mgx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv301mgx-etched.glb lmv301mgx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv301mgx-etched.step lmv301mgx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv301mgx-hero.glb lmv301mgx: hero from the plain model · Ray
lmv301mgx-hero.overlay.json lmv301mgx: hero from the plain model · Ray
lmv301mgx.glb Publish 0.1.0 · Ray
lmv301mgx.kicad_mod Publish 0.1.0 · Ray
lmv301mgx.kicad_sym Publish 0.1.0 · Ray
lmv301mgx.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv301mgx.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md lmv301mgx: one-pass backfill (citation: stored_copy, hero prebuilt (inputs unchanged)) · Ray

LMV301MGX

Texas Instruments · Operational Amplifier · SC-70-5

LMV301MGX from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting analog input of the op-amp. Input common-mode voltage range extends from -0.3 V (below V-) up to V+ - 1.2 V; input bias current is 0.182 pA typical.
2 V- power_in Negative supply rail (typically GND for single-supply operation). Supply voltage (V+ - V-) rated 1.8 V to 5.0 V (5.5 V absolute maximum).
3 -IN input Inverting analog input of the op-amp. Same common-mode range and 0.182 pA typical input bias current as the +IN pin.
4 OUTPUT output Rail-to-rail op-amp output. Drives 600 Ω resistive loads and up to 1000 pF capacitive loads in unity-gain follower configuration; output swing within ~24 mV of V- and ~30 mV of V+ (at 5 V supply, 2 kΩ load).
5 V+ power_in Positive supply rail. Operating range 1.8 V to 5.0 V (5.5 V absolute maximum). Typical supply current 150 µA at 1.8 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LMV301MGX

CAD (KiCad official)

  • Symbol: LMV301MGX
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: lmv301mgx-etched.step / lmv301mgx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv301mgx.step / lmv301mgx.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv301mgx.step 87 KB You want the bare part, or you mark your own boards.
lmv301mgx-etched.step 1.6 MB You want the part with LMV301MGX already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 397 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 1d160dc521b89026, retrieved 2026-08-17, tier: manufacturer) (maker link no longer resolves; copy stored with this page)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF