Generated by kicad-footprint-generator · KiCad file format 20260206
LMUN5213T1G
LRC · Digital Transistors · SC-70
LMUN5213T1G from LRC, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base of the NPN bias-resistor transistor, with the built-in input resistor R1 specified at 47 kΩ (min 32.9 kΩ, max 61.1 kΩ) and an R1/R2 ratio of 0.8 to 1.2. |
| 2 | EMITTER | passive | Emitter of the NPN transistor, rated with a collector-emitter voltage VCEO of 50 V and a continuous collector current IC of 100 mA. |
| 3 | COLLECTOR | passive | Collector of the NPN transistor, rated with a collector-base voltage VCBO of 50 V, a collector-emitter voltage VCEO of 50 V, and a continuous collector current IC of 100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SC-70 |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | VBR(CEO) | 50 | V | IC = 2.0 mA, IB = 0 | 2 | ||
| Collector-Base Breakdown Voltage | VBR(CBO) | 50 | V | IC = 10 μA, IE = 0 | 2 | ||
| Collector-Base Cutoff Current | ICBO | 100 | nA | VCB = 50 V, IE = 0 | 2 | ||
| Collector-Emitter Cutoff Current | ICEO | 500 | nA | VCE = 50 V, IB = 0 | 2 | ||
| Emitter-Base Cutoff Current | IEBO | 0.1 | mA | VEB = 6.0 V, IC = 0 | 2 | ||
| DC Current Gain | HFE | 80 | 140 | 320 | IC = 5.0 mA, VCE = 10 V | 2 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.25 | V | IC = 10 mA, IB = 0.3 mA | 2 | ||
| Output Voltage (on) | VOL | 0.2 | V | VCC = 5.0 V, VB = 3.5 V, RL = 1.0KΩ | 2 | ||
| Output Voltage (on) | VOH | 4.9 | V | VCC = 5.0 V, VB = 0.5 V, RL = 1.0KΩ | 2 | ||
| Input Resistor | R1 | 32.9 | 47 | 61.1 | KΩ | 2 | |
| Resistor Ratio | R1/R2 | 0.8 | 1 | 1.2 | 2 | ||
| Collector-Base Voltage | VCBO | 50 | V | 1 | |||
| Collector-Emitter Voltage | VCEO | 50 | V | 1 | |||
| Collector Current, Continuous | IC | 100 | mA | 1 | |||
| Junction and Storage Temperature | TJ,Tstg | -55 | 150 | ºC | 1 | ||
| Total Device Dissipation, FR-5 Board | PD | 202 | mW | FR-5 Board (Note 1) @ TA = 25ºC | 1 | ||
| Derate above 25ºC | 1.6 | mW/ºC | Derate above 25ºC | 1 | |||
| Thermal Resistance, Junction-to-Ambient | RΘJA | 618 | ºC/W | Junction-to-Ambient (Note 1) | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMUN5213T1G - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SC-70, generated on the KiCad land (body 1.3 x 2.05 mm, terminals on the pads, 0.95 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmun5213t1g-etched.step/lmun5213t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmun5213t1g.step/lmun5213t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (5 pp, sha256
27333acf2f79f429, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).