main
History Download
Ray Publish 0.1.0 1706193

LMUN2132LT1G

LRC · Digital Transistors · SOT-23

LMUN2132LT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base is the input of the built-in bias network, with an integrated 4.7 kΩ series base resistor (R1) and a 4.7 kΩ base-emitter resistor (R2) for LMUN2132LT1G (marking A6J).
2 EMITTER power_in Emitter is the ground reference pin, labeled GROUND on the datasheet pinout, and the base-emitter resistor R2 is connected across it.
3 COLLECTOR output Collector is the output pin, rated at 50 Vdc for VCEO and 100 mAdc maximum collector current on the series maximum ratings table.

Key specifications

Parameter Value
Manufacturer LRC
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Base Voltage VCBO 50 Vdc TA = 25°C 1
Collector-Emitter Voltage VCEO 50 Vdc TA = 25°C 1
Collector Current IC 100 mAdc TA = 25°C 1
Total Device Dissipation PD 246 mW TA = 25°C, FR-4 @ Minimum Pad (Note 1) 1
Total Device Dissipation PD 400 mW TA = 25°C, FR-4 @ 1.0 x 1.0 inch Pad (Note 2) 1
Derate above 25°C PD 1.5 mW/°C Derate above 25°C, FR-4 @ Minimum Pad (Note 1) 1
Derate above 25°C PD 2 mW/°C Derate above 25°C, FR-4 @ 1.0 x 1.0 inch Pad (Note 2) 1
Thermal Resistance, Junction-to-Ambient RθJA 508 °C/W FR-4 @ Minimum Pad (Note 1) 1
Thermal Resistance, Junction-to-Ambient RθJA 311 °C/W FR-4 @ 1.0 x 1.0 inch Pad (Note 2) 1
Thermal Resistance, Junction-to-Lead RθJL 174 °C/W FR-4 @ Minimum Pad (Note 1) 1
Thermal Resistance, Junction-to-Lead RθJL 208 °C/W FR-4 @ 1.0 x 1.0 inch Pad (Note 2) 1
Junction and Storage Temperature Range TJ,Tstg -55 150 °C 1
Input Resistor R1 R1 3.3 4.7 6.1 kΩ 3
Input Resistor R2 (nominal, device table) R2 4.7 kΩ 2
Resistor Ratio R1/R2 R1/R2 0.8 1 1.2 3
Collector-Base Cutoff Current ICBO 100 nAdc VCB = 50 V, IE = 0 2
Collector-Emitter Cutoff Current ICEO 500 nAdc VCE = 50 V, IB = 0 2
Emitter-Base Cutoff Current IEBO 2.3 mAdc VEB = 6.0 V, IC = 0 2
Collector-Base Breakdown Voltage V(BR)CBO 50 Vdc IC = 10 µA, IE = 0 2
Collector-Emitter Breakdown Voltage V(BR)CEO 50 Vdc IC = 2.0 mA, IB = 0; Pulse Width < 300 µs, Duty Cycle < 2.0% 2
Collector-Emitter Saturation Voltage VCE(sat) 0.25 Vdc IC = 10 mA, IB = 1 mA (LMUN2115/2116/2132/2133/2134 group) 3
Output Voltage (on) VOL 0.2 Vdc VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kΩ 3
Output Voltage (off) VOH 4.9 Vdc VCC = 5.0 V, VB = 0.25 V, RL = 1.0 kΩ 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LMUN2132LT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmun2132lt1g-etched.step / lmun2132lt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmun2132lt1g.step / lmun2132lt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (8 pp, sha256 7ed6331a29163044, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF