Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMS33460MG

Texas Instruments · Supervisor and Reset ICs · SC-70-5

LMS33460MG from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection. Leave floating.
2 GND power_in Internally connected to ground. Can be left floating or connected to GND (pin 3).
3 GND power_in Device ground reference.
4 VOUT output Open-drain active-low undervoltage detector output. Requires an external pull-up resistor (TI recommends 470 kOhm) to the desired logic rail. Pulls low when VIN falls below the 3 V threshold and releases high after VIN rises above ~3.15 V (built-in ~150 mV hysteresis). Max continuous output current 30 mA.
5 VIN power_in Input supply and monitored voltage. Recommended operating range 0.8 V to 7 V (absolute max 8 V to GND). Quiescent current ~1 uA typical below 5.5 V, rising sharply above that.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category PMIC
Pins 5

CAD (KiCad official)

  • Symbol: LMS33460MG
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: lms33460mg-etched.step / lms33460mg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lms33460mg.step / lms33460mg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 de6a092837bb045e, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF