main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmr54406fdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lmr54406fdbvr: viewers · Ray
lmr54406fdbvr-etched.fit.json lmr54406fdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr54406fdbvr-etched.glb lmr54406fdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr54406fdbvr-etched.step lmr54406fdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr54406fdbvr.glb Publish 0.1.0 · Ray
lmr54406fdbvr.kicad_mod Publish 0.1.0 · Ray
lmr54406fdbvr.kicad_sym Publish 0.1.0 · Ray
lmr54406fdbvr.lbr Publish 0.1.0 · Ray
lmr54406fdbvr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lmr54406fdbvr: specified limits as data (metadata.characteristics, 41 rows from the datasheet) · Ray
README.md lmr54406fdbvr: specified limits as data (metadata.characteristics, 41 rows from the datasheet) · Ray

LMR54406FDBVR

Texas Instruments · AC-DC Controllers and Regulators · SOT-23-6

LMR54406FDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB passive Bootstrap capacitor connection for the high-side FET driver. Connect a high-quality 100-nF capacitor from this pin to the SW pin.
2 GND power_in Power ground. Connected internally to the source of the low-side FET. Connect to system ground and the ground side of CIN and COUT; the path to CIN must be as short as possible.
3 FB input Feedback input to the converter. Connect a resistor divider from VOUT to set the output voltage (VFB = 0.8 V typical). Never short this terminal to ground during operation.
4 EN input Precision enable input. Do not float. High = on, low = off; may be tied to VIN. Allows an adjustable UVLO via an external resistor divider (VEN rising ~1.23 V typical).
5 VIN power_in Supply input to the internal bias LDO and high-side FET. Operating range 4V to 36V (45V absolute maximum). Connect input bypass capacitors CIN directly to this pin and GND.
6 SW power_out Switching output of the converter. Internally connected to the source of the high-side FET and drain of the low-side FET. Connect to the power inductor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • LMR54406FDBVR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN to GND (absolute maximum) -0.3 45 V 4
EN to GND (absolute maximum) -0.3 V 4
FB to GND (absolute maximum) -0.3 5.5 V 4
SW to GND (absolute maximum) -0.3 V 4
CBOOT to SW (absolute maximum) -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage VIN to GND (recommended) 4 36 V 4
EN to GND (recommended) 0 V 4
Output voltage VOUT VOUT 0.8 28 V 4
Output current LMR54406 0 0.6 A LMR54406 4
Undervoltage lockout rising threshold VIN_UVLO 3.55 3.75 4 V Rising threshold 5
Undervoltage lockout falling threshold VIN_UVLO 3.25 3.45 3.65 V Falling threshold 5
Shutdown quiescent current measured at VIN ISD 3 10 µA VEN = 0 V 5
Enable input high-level for VOUT VEN-VOUT-H 1.1 1.23 1.36 V VENABLE rising 5
Enable input low-level for VOUT VEN-VOUT-L 0.95 1.1 1.22 V VENABLE falling 5
Enable input leakage current ILKG-EN 10 200 nA VEN = 3.3 V 5
Feedback voltage VFB 0.79 0.8 0.81 V 5
Internal oscillator frequency FOSC 0.935 1.1 1.265 MHz 5
High-side current limit LMR54406 ISC 0.85 1.1 1.3 A LMR54406 5
Low-side current limit LMR54406 ILS-LIMIT 0.65 0.8 0.95 A LMR54406 5
Adjustable output voltage regulation FPWM operation VOUT -1.5 1.5 % FPWM operation 6
Enable input hysteresis for VOUT VEN-VOUT-HYS 130 mV Hysteresis 5
Undervoltage lockout hysteresis 0.3 V 5
Feedback leakage current ILKG-FB 0.2 nA FB = 1.2 V 5
High-side MOSFET ON-resistance RDS-ON-HS 450 mΩ TJ = 25℃, VIN = 12 V 5
Low-side MOSFET ON-resistance RDS-ON-LS 240 mΩ TJ = 25℃, VIN = 12 V 5
Thermal shutdown rising threshold TSD-Rising 170 °C Shutdown threshold 5
Thermal shutdown falling threshold TSD-Falling 158 °C Recovery threshold 5
Maximum switch duty cycle DMAX 98 % 6
FB pin voltage required to trip short-circuit hiccup mode VHC 0.325 V 6
Switch voltage dead time tD 2 ns 6
Minimum switch on time tON-MIN 60 ns IOUT = 1 A 6
Minimum switch off time tOFF-MIN 110 ns IOUT = 1 A 6
Maximum switch on time tON-MAX 7.5 µs 6
Internal soft-start time tSS 1.8 ms 6
Junction-to-ambient thermal resistance RθJA 173 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 116 °C/W 4
Junction-to-board thermal resistance RθJB 31 °C/W 4
Junction-to-top characterization parameter ψJT 20 °C/W 4
Junction-to-board characterization parameter ψJB 30 °C/W 4

CAD (KiCad official)

  • Symbol: LMR54406FDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr54406fdbvr-etched.step / lmr54406fdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr54406fdbvr.step / lmr54406fdbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmr54406fdbvr.step 97 KB You want the bare part, or you mark your own boards.
lmr54406fdbvr-etched.step 2.3 MB You want the part with LMR54406FDBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 577 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 ee6cb684e59b9ea8, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF