main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmr51603yfdbvr: viewers rendered from the public page · Ray
lmr51603yfdbvr-etched.glb lmr51603yfdbvr: factory component page (tier=mfr) · Ray
lmr51603yfdbvr-etched.step lmr51603yfdbvr: factory component page (tier=mfr) · Ray
lmr51603yfdbvr-hero.glb lmr51603yfdbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr51603yfdbvr-hero.overlay.json lmr51603yfdbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr51603yfdbvr.glb Publish 0.1.0 · Ray
lmr51603yfdbvr.kicad_mod Publish 0.1.0 · Ray
lmr51603yfdbvr.kicad_sym Publish 0.1.0 · Ray
lmr51603yfdbvr.lbr Publish 0.1.0 · Ray
lmr51603yfdbvr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

LMR51603YFDBVR

Texas Instruments · IC · SOT-23-6

LMR51603YFDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CB passive Bootstrap capacitor connection for the high-side FET driver; connect a high quality 100nF capacitor from this pin to the SW pin.
2 GND power_in Power ground connected to the source of the low-side FET internally; connect to system ground and the ground side of CIN and COUT, with the path to CIN as short as possible.
3 FB input Feedback input to the converter; connect a resistor divider to set the output voltage (or to VOUT directly for fixed output) and never short this pin to ground during operation.
4 EN input Precision enable input (High = On, Low = Off) that must not be floated, can be tied to VIN, and allows an adjustable UVLO via an external resistor divider.
5 VIN power_in Supply input to the internal bias LDO and high-side FET, operating from 4V to 65V; connect to the input supply with input bypass capacitors CIN directly at this pin and GND.
6 SW passive Switching output of the converter, internally connected to the source of the high-side FET and drain of the low-side FET; connect to the power inductor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN quiescent current (non-switching) IQ(VIN) 26.5 40 µA VEN = 3V, PFM variant only 5
VIN quiescent current IQ(VIN) 420 µA VEN = 3V, FPWM operation 5
VIN shutdown supply current ISD(VIN) 0.8 3 µA VEN = 0V 5
VIN UVLO rising threshold VINUVLO(R) 3.82 4 V VIN rising 5
VIN UVLO falling threshold VINUVLO(F) 3.4 3.56 V VIN falling 5
EN voltage rising threshold VEN(R) 1.1 1.227 1.36 V EN rising, enable switching 5
EN voltage falling threshold VEN(F) 0.85 1 1.15 V EN falling, disable switching 5
EN pin sourcing current post EN rising threshold IEN(P2) 10 50 nA VEN = 3V 5
Reference voltage VFB 0.788 0.8 0.812 V 5
Switching frequency, CCM operation, Y version fSW(CCM) 0.935 1.1 1.265 Mhz "Y" Version 5
High-side peak current limit IHS_PK(OC) 0.4 0.55 0.7 A 6
Low-side valley current limit ILS_V(OC) 0.32 0.42 0.51 A 6
VIN to GND VIN -0.3 70 V 4
EN to GND EN -0.3 V max VIN + 0.3 V 4
FB to GND FB -0.3 5.5 V 4
SW to GND SW -0.3 70 V 4
SW to GND transients SW -5 70 V less than 10ns transients 4
CBOOT to SW CBOOT -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN to GND VIN 4 65 V 4
EN EN 0 V max VIN 4
FB FB 0 4.5 V 4
Output voltage VOUT 0.8 28 V 4
Output current IOUT 300 mA 4
Operating junction temperature TJ -40 150 °C 4
HBM ESD V(ESD) -2500 2500 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
CDM ESD V(ESD) -750 750 V Charged-device model, ANSI/ESDA/JEDEC JS-002 4
Junction-to-ambient thermal resistance RθJA 147.8 °C/W DBV (SOT-23-6), 6 pins 5
Junction-to-ambient thermal resistance with EVM RθJA(Effective) 67.2 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 71.1 °C/W 5
Junction-to-board thermal resistance RθJB 36.6 °C/W 5
Junction-to-top characterization parameter ψJT 14.2 °C/W 5
Junction-to-board characterization parameter ψJB 36.4 °C/W 5
Input supply current when in regulation ISUPPLY 38 µA VIN = 24V, VOUT = 5V, IOUT = 0A, RFBB = 22.1kΩ, PFM variant 5
VIN UVLO hysteresis VINUVLO(H) 0.25 V 5
FB input leakage current IFB(LKG) 0.2 nA Adjustable configuration, VFB = 0.8V 5
Internal fixed soft-start time tSS 2.3 ms 5
High-side MOSFET on-resistance RDSON(HS) 0.7 Ω VIN = 12V, TJ = 25°C 5
Low-side MOSFET on-resistance RDSON(LS) 0.36 Ω VIN = 12V, TJ = 25°C 6
Minimum ON pulse width tON(min) 80 ns VIN = 12V, IOUT = 0.1A 6
Maximum ON pulse width tON(max) 5 µs VIN = 12V, IOUT = 0.3A 6
Minimum OFF pulse width tOFF(min) 200 ns VIN = 5V 6
Low-side negative current limit ILS(NOC) -0.27 A FPWM only 6
Zero-cross detection current threshold IZC 0 A 6
FB pin voltage required to trip short-circuit hiccup mode VHICCUP 0.32 V 6
Thermal shutdown threshold TJ(SD) 165 °C Temperature rising 6
Thermal shutdown hysteresis TJ(HYS) 20 °C 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used 22

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LMR51603YFDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmr51603yfdbvr-etched.step / lmr51603yfdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr51603yfdbvr.step / lmr51603yfdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 533dd4559c5b3411, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF