main
Ray
Publish 0.1.0
5b428cb
LMR51603Y3DBVR
Texas Instruments · IC · SOT-23-6
LMR51603Y3DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side FET driver; connect a high quality 100nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground, connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, with the path to CIN as short as possible. |
| 3 | FB | input | Feedback input to the converter; connect to VOUT directly for the fixed 3.3V output on this variant, and never short this pin to ground during operation. |
| 4 | EN | input | Precision enable input (High = On, Low = Off) that must not be floated, can be tied to VIN, and allows an adjustable UVLO via an external resistor divider. |
| 5 | VIN | power_in | Supply input to the internal bias LDO and high-side FET (4V to 65V recommended); connect to the input supply with input bypass capacitors CIN placed directly at this pin and GND. |
| 6 | SW | passive | Switching output of the converter, internally connected to the source of the high-side FET and drain of the low-side FET; connect to the power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN quiescent current (non-switching) | IQ(VIN) | 26.5 | 40 | µA | VEN = 3V, PFM variant only | 5 | |
| VIN shutdown supply current | ISD(VIN) | 0.8 | 3 | µA | VEN = 0V | 5 | |
| VIN UVLO rising threshold | VINUVLO(R) | 3.82 | 4 | V | VIN rising | 5 | |
| VIN UVLO falling threshold | VINUVLO(F) | 3.4 | 3.56 | V | VIN falling | 5 | |
| EN voltage rising threshold | VEN(R) | 1.1 | 1.227 | 1.36 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.85 | 1 | 1.15 | V | EN falling, disable switching | 5 |
| Output voltage accuracy for fixed VOUT | VFB_3p3V | 3.25 | 3.3 | 3.35 | V | 3.3V VOUT, VIN = 4V to 65V, IOUT = 0.3A | 5 |
| Switching frequency, CCM operation "Y" Version | fSW(CCM) | 0.935 | 1.1 | 1.265 | Mhz | 5 | |
| High-side peak current limit | IHS_PK(OC) | 0.4 | 0.55 | 0.7 | A | 6 | |
| Low-side valley current limit | ILS_V(OC) | 0.32 | 0.42 | 0.51 | A | 6 | |
| Input supply current when in regulation | ISUPPLY | 38 | µA | VIN = 24V, VOUT = 5V, IOUT = 0A, RFBB = 22.1kΩ, PFM variant | 5 | ||
| VIN UVLO hysteresis | VINUVLO(H) | 0.25 | V | 5 | |||
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | 50 | nA | VEN = 3V | 5 | |
| Internal fixed soft-start time | tSS | 2.3 | ms | 5 | |||
| High-side MOSFET on-resistance | RDSON(HS) | 0.7 | Ω | VIN = 12V, TJ = 25°C | 5 | ||
| Low-side MOSFET on-resistance | RDSON(LS) | 0.36 | Ω | VIN = 12V, TJ = 25°C | 6 | ||
| Minimum ON pulse width | tON(min) | 80 | ns | VIN = 12V, IOUT = 0.1A | 6 | ||
| Maximum ON pulse width | tON(max) | 5 | µs | VIN = 12V, IOUT = 0.3A | 6 | ||
| Minimum OFF pulse width | tOFF(min) | 200 | ns | VIN = 5V | 6 | ||
| Zero-cross detection current threshold | IZC | 0 | A | 6 | |||
| FB pin voltage required to trip short-circuit hiccup mode | VHICCUP | 0.32 | V | 6 | |||
| Thermal shutdown threshold | TJ(SD) | 165 | °C | Temperature rising | 6 | ||
| Thermal shutdown hysteresis | TJ(HYS) | 20 | °C | 6 | |||
| VIN to GND | VIN | -0.3 | 70 | V | 4 | ||
| EN to GND | EN | -0.3 | V | max VIN + 0.3 V | 4 | ||
| FB to GND | FB | -0.3 | 5.5 | V | 4 | ||
| SW to GND | SW | -0.3 | 70 | V | 4 | ||
| SW to GND less than 10ns transients | SW | -5 | 70 | V | less than 10ns transients | 4 | |
| CBOOT to SW | CBOOT | -0.3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input voltage VIN to GND | VIN | 4 | 65 | V | 4 | ||
| EN voltage | EN | 0 | V | max VIN | 4 | ||
| FB voltage | FB | 0 | 4.5 | V | 4 | ||
| Output voltage | VOUT | 0.8 | 28 | V | 4 | ||
| Output current | IOUT | 300 | mA | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 147.8 | °C/W | DBV (SOT-23-6), 6 pins | 5 | ||
| Junction-to-ambient thermal resistance with EVM | RθJA(Effective) | 67.2 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 36.6 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 14.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 36.4 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 22 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMR51603Y3DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmr51603y3dbvr-etched.step/lmr51603y3dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr51603y3dbvr.step/lmr51603y3dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
533dd4559c5b3411, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LMR51603Y3DBVR
**Texas Instruments** · IC · SOT-23-6
LMR51603Y3DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side FET driver; connect a high quality 100nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground, connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, with the path to CIN as short as possible. |
| 3 | FB | input | Feedback input to the converter; connect to VOUT directly for the fixed 3.3V output on this variant, and never short this pin to ground during operation. |
| 4 | EN | input | Precision enable input (High = On, Low = Off) that must not be floated, can be tied to VIN, and allows an adjustable UVLO via an external resistor divider. |
| 5 | VIN | power_in | Supply input to the internal bias LDO and high-side FET (4V to 65V recommended); connect to the input supply with input bypass capacitors CIN placed directly at this pin and GND. |
| 6 | SW | passive | Switching output of the converter, internally connected to the source of the high-side FET and drain of the low-side FET; connect to the power inductor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN quiescent current (non-switching) | IQ(VIN) | | 26.5 | 40 | µA | VEN = 3V, PFM variant only | 5 |
| VIN shutdown supply current | ISD(VIN) | | 0.8 | 3 | µA | VEN = 0V | 5 |
| VIN UVLO rising threshold | VINUVLO(R) | 3.82 | | 4 | V | VIN rising | 5 |
| VIN UVLO falling threshold | VINUVLO(F) | 3.4 | | 3.56 | V | VIN falling | 5 |
| EN voltage rising threshold | VEN(R) | 1.1 | 1.227 | 1.36 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.85 | 1 | 1.15 | V | EN falling, disable switching | 5 |
| Output voltage accuracy for fixed VOUT | VFB_3p3V | 3.25 | 3.3 | 3.35 | V | 3.3V VOUT, VIN = 4V to 65V, IOUT = 0.3A | 5 |
| Switching frequency, CCM operation "Y" Version | fSW(CCM) | 0.935 | 1.1 | 1.265 | Mhz | | 5 |
| High-side peak current limit | IHS_PK(OC) | 0.4 | 0.55 | 0.7 | A | | 6 |
| Low-side valley current limit | ILS_V(OC) | 0.32 | 0.42 | 0.51 | A | | 6 |
| Input supply current when in regulation | ISUPPLY | | 38 | | µA | VIN = 24V, VOUT = 5V, IOUT = 0A, RFBB = 22.1kΩ, PFM variant | 5 |
| VIN UVLO hysteresis | VINUVLO(H) | | 0.25 | | V | | 5 |
| EN pin sourcing current post EN rising threshold | IEN(P2) | | 10 | 50 | nA | VEN = 3V | 5 |
| Internal fixed soft-start time | tSS | | 2.3 | | ms | | 5 |
| High-side MOSFET on-resistance | RDSON(HS) | | 0.7 | | Ω | VIN = 12V, TJ = 25°C | 5 |
| Low-side MOSFET on-resistance | RDSON(LS) | | 0.36 | | Ω | VIN = 12V, TJ = 25°C | 6 |
| Minimum ON pulse width | tON(min) | | 80 | | ns | VIN = 12V, IOUT = 0.1A | 6 |
| Maximum ON pulse width | tON(max) | | 5 | | µs | VIN = 12V, IOUT = 0.3A | 6 |
| Minimum OFF pulse width | tOFF(min) | | 200 | | ns | VIN = 5V | 6 |
| Zero-cross detection current threshold | IZC | | 0 | | A | | 6 |
| FB pin voltage required to trip short-circuit hiccup mode | VHICCUP | | 0.32 | | V | | 6 |
| Thermal shutdown threshold | TJ(SD) | | 165 | | °C | Temperature rising | 6 |
| Thermal shutdown hysteresis | TJ(HYS) | | 20 | | °C | | 6 |
| VIN to GND | VIN | -0.3 | | 70 | V | | 4 |
| EN to GND | EN | -0.3 | | | V | max VIN + 0.3 V | 4 |
| FB to GND | FB | -0.3 | | 5.5 | V | | 4 |
| SW to GND | SW | -0.3 | | 70 | V | | 4 |
| SW to GND less than 10ns transients | SW | -5 | | 70 | V | less than 10ns transients | 4 |
| CBOOT to SW | CBOOT | -0.3 | | 5.5 | V | | 4 |
| Junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Input voltage VIN to GND | VIN | 4 | | 65 | V | | 4 |
| EN voltage | EN | 0 | | | V | max VIN | 4 |
| FB voltage | FB | 0 | | 4.5 | V | | 4 |
| Output voltage | VOUT | 0.8 | | 28 | V | | 4 |
| Output current | IOUT | | | 300 | mA | | 4 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 147.8 | | °C/W | DBV (SOT-23-6), 6 pins | 5 |
| Junction-to-ambient thermal resistance with EVM | RθJA(Effective) | | 67.2 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 71.1 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 36.6 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 14.2 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 36.4 | | °C/W | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 22 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LMR51603Y3DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lmr51603y3dbvr-etched.step` / `lmr51603y3dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr51603y3dbvr.step` / `lmr51603y3dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmr51603.pdf?ts=1734228862037) (33 pp, sha256 `533dd4559c5b3411`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lmr51603y3dbvr-datasheet.pdf)