3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMR50410XFDBVR
Texas Instruments · DC-DC Converters · SOT-23-6
LMR50410XFDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | output | Bootstrap capacitor connection for high-side FET driver; connect 100-nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground terminal connected to low-side FET source internally; connect to system ground and ground side of input and output bypass capacitors with the shortest possible path to input capacitor. |
| 3 | FB | input | Feedback input to set output voltage via resistor divider; never short to ground during operation. |
| 4 | EN | input | Precision enable input (high = on, low = off, do not float) allowing adjustable UVLO via external resistor divider or tying to VIN. |
| 5 | VIN | power_in | Supply input to internal bias LDO and high-side FET; connect to input supply and bypass capacitors which must be directly connected to this pin and GND. |
| 6 | SW | output | Switching output internally connected to high-side FET source and low-side FET drain; connect to power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND (absolute maximum) | VIN | -0.3 | 38 | V | Over junction temperature range -40°C to 150°C | 4 | |
| EN to GND (absolute maximum) | EN | -0.3 | V | Maximum printed as VIN+0.3 V | 4 | ||
| FB to GND (absolute maximum) | FB | -0.3 | 5.5 | V | 4 | ||
| SW to GND (absolute maximum) | SW | -0.3 | V | Maximum printed as VIN+0.3 V | 4 | ||
| SW to GND less than 10-ns transients (absolute maximum) | SW | -3.5 | 38 | V | Less than 10-ns transients | 4 | |
| CB to SW (absolute maximum) | CB | -0.3 | 5.5 | V | 4 | ||
| Junction temperature (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN to GND (recommended operating) | VIN | 4 | 36 | V | 4 | ||
| EN to GND (recommended operating) | EN | 0 | V | Maximum printed as VIN; must not exceed VIN by more than 0.3 V (footnote 2) | 4 | ||
| Output voltage (recommended operating) | VOUT | 1 | 28 | V | Maximum ensured up to 90% of VIN in final production (footnote 4) | 4 | |
| Output current (recommended operating) | IOUT | 0 | 1 | A | 4 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | Recommended operating junction temperature range | 4 | |
| Adjustable output voltage regulation | VOUT | -1.5 | 1.5 | % | FPWM operation | 6 | |
| Enable input high-level for VOUT | VEN-VOUT-H | 1.1 | 1.23 | 1.36 | V | VENABLE rising | 5 |
| Enable input low-level for VOUT | VEN-VOUT-L | 0.95 | 1.1 | 1.22 | V | VENABLE falling | 5 |
| Undervoltage lockout rising threshold | VIN_UVLO | 3.55 | 3.75 | 4 | V | Rising threshold | 5 |
| Undervoltage lockout falling threshold | VIN_UVLO | 3.25 | 3.45 | 3.65 | V | Falling threshold | 5 |
| Shutdown quiescent current | ISD | 3 | 10 | µA | VEN = 0 V; measured at VIN pin | 5 | |
| Enable input leakage current | ILKG-EN | 10 | 200 | nA | VEN = 3.3V | 5 | |
| Feedback voltage | VFB | 0.99 | 1 | 1.01 | V | 5 | |
| High-side current limit | ISC | 1.25 | 1.6 | 1.9 | A | Vin=12V | 5 |
| Low-side current limit | ILS-LIMIT | 0.9 | 1.1 | 1.3 | A | Vin=12V | 5 |
| Maximum switch duty cycle | DMAX | 98 | % | 6 | |||
| Maximum switch on-time | tON-MAX | 7.5 | µs | 6 | |||
| Internal oscillator frequency | FOSC | 600 | 700 | 800 | kHz | 700-kHz variant | 6 |
| Minimum switch on-time | tON-MIN | 60 | ns | IOUT=1A | 6 | ||
| Minimum switch off-time | tOFF-MIN | 110 | ns | IOUT=1A | 6 | ||
| Internal soft-start time | tSS | 1.8 | ms | 6 | |||
| Time between current-limit hiccup burst | tHC | 135 | ms | 6 | |||
| FB pin voltage to trip short-circuit hiccup mode | VHC | 0.4 | V | 6 | |||
| Switch voltage dead time | tD | 2 | ns | 6 | |||
| Undervoltage lockout hysteresis | VIN_UVLO | 0.3 | V | 5 | |||
| Enable input hysteresis for VOUT | VEN-VOUT-HYS | 130 | mV | Hysteresis | 5 | ||
| Feedback leakage current | ILKG-FB | 0.2 | nA | FB = 1.2 V | 5 | ||
| Negative current limit (FPWM variant) | IL-NEG | -0.6 | A | FPWM variant only | 5 | ||
| High-side MOSFET ON-resistance | RDS-ON-HS | 450 | mΩ | TJ=25 ℃, VIN = 12 V | 5 | ||
| Low-side MOSFET ON-resistance | RDS-ON-LS | 240 | mΩ | TJ=25 ℃, VIN = 12 V | 5 | ||
| Thermal shutdown rising threshold | TSD-Rising | 170 | °C | Shutdown threshold | 5 | ||
| Thermal shutdown falling threshold | TSD-Falling | 158 | °C | Recovery threshold | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 173 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 116 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 31 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 20 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 30 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LMR50410XFDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr50410xfdbvr-etched.step/lmr50410xfdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr50410xfdbvr.step/lmr50410xfdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
fa9b9488d6570590, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).