← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# LMR36510ADDAR++**Texas Instruments** · DC-DC Converters · SOP-8-EP++LMR36510ADDAR from Texas Instruments, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Power and analog ground terminal; all electrical parameters are measured relative to this pin. |+| 2 | VIN | power_in | Input power supply (4.2V to 65V recommended); connect quality bypass capacitors directly to this pin and PGND. |+| 3 | EN | input | Enable control input (0V to 65V); high level enables device, low level disables; do not leave open. |+| 4 | PG | output | Open-drain power good flag output; pulled low when output voltage out of regulation or EN is low; drive through external current-limiting pull-up resistor. |+| 5 | FB | input | Feedback input regulated to 1.0V reference; connect to output voltage feedback divider tap; do not leave open. |+| 6 | VCC | power_out | Internal 5V LDO output (nominal 5.0V, range 4.75V to 5.25V); connect 1µF bypass capacitor to PGND; reserve for internal circuits only. |+| 7 | BOOT | power_out | Bootstrap power supply for internal high-side gate driver; connect 100nF quality capacitor between BOOT and SW pin. |+| 8 | SW | output | Regulator switch node (-0.3V to 70.3V maximum); driven by internal MOSFETs between VIN and GND; connect to power inductor. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `LMR36510ADDAR`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: SOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `lmr36510addar-etched.step` / `lmr36510addar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr36510addar.step` / `lmr36510addar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmr36510) (40 pp, sha256 `ef3035185e1964f7`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmr36510addar-datasheet.pdf)
page.jsonadded+166@@ -0,0 +1,166 @@+{+ "slug": "lmr36510addar",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lmr36510addar",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmr36510addar.kicad_sym",+ "lmr36510addar.kicad_mod",+ "lmr36510addar.glb",+ "lmr36510addar.step",+ "lmr36510addar.lbr",+ "docs/hero.png",+ "docs/lmr36510addar-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lmr36510addar-hero.glb",+ "lmr36510addar-hero.overlay.json"+ ],+ "component": {+ "mpn": "LMR36510ADDAR",+ "manufacturer": "Texas Instruments",+ "package": "SOP-8-EP",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmr36510",+ "parts": {+ "symbol": "lmr36510addar.kicad_sym",+ "footprint": "lmr36510addar.kicad_mod",+ "model_3d": "lmr36510addar-hero.glb",+ "model_3d_plain": "lmr36510addar.glb",+ "model_3d_step": "lmr36510addar-etched.step",+ "model_3d_step_plain": "lmr36510addar.step",+ "lbr": "lmr36510addar.lbr"+ },+ "distributor_links": {+ "lcsc": 1858393,+ "digikey": "296-LMR36510ADDARTR-ND",+ "mouser": "595-LMR36510ADDAR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T01:16:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-LMR36510ADDARTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-LMR36510ADDAR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PGND",+ "type": "power_in",+ "description": "Power and analog ground terminal; all electrical parameters are measured relative to this pin."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input power supply (4.2V to 65V recommended); connect quality bypass capacitors directly to this pin and PGND."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable control input (0V to 65V); high level enables device, low level disables; do not leave open."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "output",+ "description": "Open-drain power good flag output; pulled low when output voltage out of regulation or EN is low; drive through external current-limiting pull-up resistor."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input regulated to 1.0V reference; connect to output voltage feedback divider tap; do not leave open."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal 5V LDO output (nominal 5.0V, range 4.75V to 5.25V); connect 1µF bypass capacitor to PGND; reserve for internal circuits only."+ },+ {+ "number": "7",+ "name": "BOOT",+ "type": "power_out",+ "description": "Bootstrap power supply for internal high-side gate driver; connect 100nF quality capacitor between BOOT and SW pin."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Regulator switch node (-0.3V to 70.3V maximum); driven by internal MOSFETs between VIN and GND; connect to power inductor."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Thermal pad (exposed pad on bottom of DDA package) present in SOP-8-EP package; serves as primary th",+ "exposed pad 9 added from the footprint"+ ],+ "pages_sent": 28,+ "cost_usd": 0.2294,+ "at": "2026-10-03T01:15:54"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmr36510",+ "pages": 40,+ "sha256": "ef3035185e1964f7",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}