LMR36015AQRNXRQ1

{
  "slug": "lmr36015aqrnxrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VQFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lmr36015aqrnxrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr36015aqrnxrq1.kicad_sym",
    "lmr36015aqrnxrq1.kicad_mod",
    "lmr36015aqrnxrq1.glb",
    "lmr36015aqrnxrq1.step",
    "lmr36015aqrnxrq1.lbr",
    "docs/hero.png",
    "docs/lmr36015aqrnxrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmr36015aqrnxrq1-hero.glb",
    "lmr36015aqrnxrq1-hero.overlay.json",
    "lmr36015aqrnxrq1-etched.glb"
  ],
  "component": {
    "mpn": "LMR36015AQRNXRQ1",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-12(2x3)",
    "pin_count": 12,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmr36015-q1.pdf",
    "parts": {
      "symbol": "lmr36015aqrnxrq1.kicad_sym",
      "footprint": "lmr36015aqrnxrq1.kicad_mod",
      "model_3d": "lmr36015aqrnxrq1-hero.glb",
      "model_3d_plain": "lmr36015aqrnxrq1-etched.glb",
      "model_3d_step": "lmr36015aqrnxrq1-etched.step",
      "model_3d_step_plain": "lmr36015aqrnxrq1.step",
      "lbr": "lmr36015aqrnxrq1.lbr"
    },
    "distributor_links": {
      "digikey": "296-LMR36015AQRNXRQ1TR-ND",
      "mouser": "595-LMR36015AQRNXRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T17:06:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LMR36015AQRNXRQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LMR36015AQRNXRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground terminal to be connected to system ground and AGND, with short wide traces to CIN."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator, to be connected to CIN with short wide traces, specified at 4.2 V to 60 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection to the regulator; it is to be tied to the SW pin on the PCB to simplify the CBOOT capacitor connection."
      },
      {
        "number": "4",
        "name": "BOOT",
        "type": "power_in",
        "description": "Bootstrap supply for the internal high-side driver, connected through a high-quality 100-nF capacitor to the SW pin."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5-V LDO output used for internal control circuits, decoupled with a high-quality 1-uF capacitor to GND and not to be used for external loads."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground and reference for the regulator; all electrical parameters are measured with respect to this pin and it is to be connected to system ground."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Feedback input that connects to the output node for fixed VOUT or to the feedback divider tap, and must not be left floating or grounded."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag output that is high when power is OK and low when power is bad, going low when EN is low, and it can be left open or grounded when unused."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Enable input where high turns the device ON and low turns it OFF, it can be connected directly to VIN, and it must not be left floating."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator, to be connected to CIN with short wide traces, specified at 4.2 V to 60 V."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground terminal to be connected to system ground and AGND, with short wide traces to CIN."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switch node that connects to the power inductor and is to be tied to the NC pin on the PCB to simplify the CBOOT connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is taken from the RNX 12-pin VQFN-HR pin table on page 5. The datasheet calls the package; Pin types are mapped to KiCad classes from the datasheet's G, P, A and NC codes. Pin 8 (PG) is typed"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0411,
        "at": "2026-10-29T17:07:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmr36015-q1.pdf",
        "pages": 53,
        "sha256": "4172de24e94e7067",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 12,
        "described": 12,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr36015aqrnxrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.02,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.003,
        "footprint_binding": "identity",
        "sha256": "c5783bb846c5e8de532e7ffeb6af1cf994bd9fc5bb8e751bece34be3be2803ca",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr36015aqrnxrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.02,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.003,
        "footprint_binding": "identity",
        "sha256": "d6ded1b60aeabaea1a7404897945d1a9ef8090706af849e0746db8d9926c8e95",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}