component

LMR14050SQDPRRQ1

Public Made by Adom

by adom

Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)lmr14050sqdprrq1factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 2d ago
viewers lmr14050sqdprrq1: viewers · Ray 2d ago
lmr14050sqdprrq1-etched.glb lmr14050sqdprrq1: factory component page (tier=lcsc) · Ray 2d ago
lmr14050sqdprrq1-etched.step lmr14050sqdprrq1: factory component page (tier=lcsc) · Ray 2d ago
lmr14050sqdprrq1-hero.glb lmr14050sqdprrq1: hero GLB from the etched model (keeps the MPN mark) · Ray 1d ago
lmr14050sqdprrq1-hero.overlay.json Publish 0.1.0 · Ray 2d ago
lmr14050sqdprrq1.glb Publish 0.1.0 · Ray 2d ago
lmr14050sqdprrq1.kicad_mod Publish 0.1.0 · Ray 2d ago
lmr14050sqdprrq1.kicad_sym Publish 0.1.0 · Ray 2d ago
lmr14050sqdprrq1.lbr Publish 0.1.0 · Ray 2d ago
lmr14050sqdprrq1.step Publish 0.1.0 · Ray 2d ago
package.json Publish 0.1.0 · Ray 2d ago
page.json Set visibility: public · Ray 2d ago
README.md Initial commit: component/lmr14050sqdprrq1 · Ray 2d ago

LMR14050SQDPRRQ1

Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)

LMR14050SQDPRRQ1 from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_out Bootstrap capacitor connection for the high-side MOSFET gate driver, where a quality 0.1 µF capacitor (rated 16 V or higher, X7R or X5R) is connected between BOOT and SW.
2 VIN power_in Supply input for the regulator, with a recommended operating range of 4 V to 40 V, and the path from VIN to the input bypass capacitor CIN and GND must be kept as short as possible.
3 VIN power_in Second supply input pin tied to VIN, with a recommended operating range of 4 V to 40 V, and the path from VIN to the input bypass capacitor CIN and GND must be kept as short as possible.
4 EN input Enable pin with an internal pull-up current source that disables the device when pulled below 1.2 V, while leaving it floating or connecting it to VIN enables the device, and it can be used with two resistors to set the input UVLO.
5 RT/SYNC input Switching-frequency pin, programmed by a resistor RT to GND (200 kHz to 2.5 MHz) or driven by an external clock (250 kHz to 2.3 MHz) with a recommended range of 0 V to 3.3 V, and it must not be left floating or shorted to ground.
6 SS input Soft-start pin, where a capacitor from SS to GND sets the output ramp time using a typical 3 µA charge current, and the maximum CSS for the WSON package is 4.7 nF.
7 FB input Feedback input connected to the output voltage divider that sets VOUT against the 0.75 V typical reference, with a recommended range of 0 V to 5 V, and it must not be shorted to ground during operation.
8 PGOOD output Open-drain power-good flag output that needs a 10 kΩ to 100 kΩ pull-up to a logic rail or DC voltage not higher than 7 V.
9 GND power_in System ground pin that serves as the regulator ground reference and must connect to the system ground plane.
10 SW power_out Regulator switching output connected internally to the low-side power MOSFET and to the power inductor, with a recommended range of -1 V to 40 V.
11 Thermal Pad power_in Exposed thermal pad that is the main heat-dissipation path for the die and must be connected to a ground layer on the PCB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(4x4)
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: LMR14050SQDPRRQ1
  • Footprint: Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm
  • 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lmr14050sqdprrq1-etched.step / lmr14050sqdprrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr14050sqdprrq1.step / lmr14050sqdprrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 83448eca383abb85, retrieved 2026-10-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF