Generated by kicad-footprint-generator · KiCad file format 20260206
LMR14030QDPRTQ1
Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)
LMR14030QDPRTQ1 from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_out | Bootstrap capacitor connection for high-side MOSFET gate driver, connect 0.1µF ceramic capacitor between BOOT and SW pins. |
| 2 | VIN | power_in | Power supply input pin, connect bypass capacitor CIN with short PCB trace to GND. |
| 3 | VIN | power_in | Additional power supply input pin for distributed current routing and reduced parasitic inductance. |
| 4 | EN | input | Enable input with internal pull-up current, pull below 1.2V to disable or leave floating to enable device. |
| 5 | RT/SYNC | input | Frequency selection via external resistor for 200kHz to 2.5MHz operation or external clock synchronization input. |
| 6 | SS | input | Soft start control pin with internal 3µA charging current, connect external capacitor to program startup ramp time. |
| 7 | FB | input | Feedback input from output voltage divider, compared to 0.75V internal reference for voltage regulation. |
| 8 | PGOOD | tri_state | Open-drain power good output indicating regulated voltage status, use 10kΩ to 100kΩ external pull-up resistor. |
| 9 | GND | power_in | System ground and signal return reference, must connect to PCB ground plane. |
| 10 | SW | output | Switch output to external inductor, transitions between 0V and VIN at programmed switching frequency. |
| 11 | Thermal Pad | power_in | Exposed thermal pad for die heat dissipation, must solder to PCB ground plane for thermal and electrical connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN, EN to GND | -0.3 | 44 | V | 4 | |||
| BOOT to GND | -0.3 | 49 | V | 4 | |||
| SS to GND | -0.3 | 5 | V | 4 | |||
| FB to GND (DPR package) | -0.3 | 7 | V | 4 | |||
| RT/SYNC to GND | -0.3 | 3.6 | V | 4 | |||
| PGOOD to GND | -0.3 | 7 | V | 4 | |||
| BOOT to SW (DPR package) | 6.5 | V | 4 | ||||
| SW to GND | -3 | 44 | V | 4 | |||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human body model (HBM) | V(ESD) | -2000 | 2000 | V | AEC Q100-002 | 4 | |
| ESD charged device model (CDM) | V(ESD) | -750 | 750 | V | AEC Q100-011 | 4 | |
| VIN operating input voltage | VIN | 4 | 40 | V | 4 | ||
| VOUT output voltage | VOUT | 0.8 | 28 | V | 4 | ||
| BOOT | BOOT | 45 | V | 4 | |||
| SW | SW | -1 | 40 | V | 4 | ||
| FB | FB | 0 | 5 | V | 4 | ||
| EN | EN | 0 | 40 | V | 4 | ||
| RT/SYNC | RT/SYNC | 0 | 3.3 | V | 4 | ||
| SS | SS | 0 | 3 | V | 4 | ||
| PGOOD to GND | PGOOD | 0 | 5 | V | 4 | ||
| Switching frequency range | 200 | 2500 | kHz | RT mode | 4 | ||
| Switching frequency range | 250 | 2300 | kHz | SYNC mode | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN operating input voltage | 4 | 40 | V | 5 | |||
| UVLO undervoltage lockout threshold, rising | 3.5 | 3.7 | 3.9 | V | 5 | ||
| EN threshold voltage | VEN_TH | 1.05 | 1.2 | 1.38 | V | 5 | |
| Feedback voltage | VFB | 0.744 | 0.75 | 0.756 | V | TJ = 25°C | 5 |
| Feedback voltage | VFB | 0.735 | 0.75 | 0.765 | V | TJ = -40°C to 125°C | 5 |
| High-side MOSFET current limit | ILIMT | 4.1 | 5.5 | 7.7 | A | VIN = 12V, TJ = -40°C to 125°C, open loop | 6 |
| Switching frequency | fSW | 1758 | 1912 | 2066 | kHz | RT = 11.5kΩ | 6 |
| Switching frequency range in SYNC mode | 250 | 2300 | kHz | 6 | |||
| Thermal resistance, junction to ambient | RθJA | 36.5 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 0.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 13.8 | °C/W | 5 | |||
| Thermal resistance, junction to case (top) | RθJC(top) | 35.2 | °C/W | 5 | |||
| Thermal resistance, junction to case (bottom) | RθJC(bot) | 3.1 | °C/W | 5 | |||
| Thermal resistance, junction to board | RθJB | 13.6 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LMR14030QDPRTQ1 - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lmr14030qdprtq1-etched.step/lmr14030qdprtq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr14030qdprtq1.step/lmr14030qdprtq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
1f91b09fa6ebdebe, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).