component
LMQ644A2QRXARQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-24-EP(5x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# LMQ644A2QRXARQ1++**Texas Instruments** · DC-DC Converters · VQFN-24-EP(5x4)++LMQ644A2QRXARQ1 from Texas Instruments, in a VQFN-24-EP(5x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN2 | power_in | Input supply to regulator with 3V to 36V operating range, requires high quality bypass capacitor to PGND2 with low impedance connection. |+| 2 | BOOT2 | passive | Bootstrap capacitor supply for channel 2 high-side gate driver, charged through internal diode from SW2 when low. |+| 3 | SW2 | output | Channel 2 switching node internally connected to high-side NMOS source and low-side NMOS drain, connects to power inductor. |+| 4 | PGND3 | power_in | Power return for internal low-side MOSFET with low impedance connection required to PGND1, PGND2, and exposed pad. |+| 5 | SW1 | output | Channel 1 switching node internally connected to high-side NMOS source and low-side NMOS drain, connects to power inductor. |+| 6 | BOOT1 | passive | Bootstrap capacitor supply for channel 1 high-side gate driver, charged through internal diode from SW1 when low. |+| 7 | VIN1 | power_in | Input supply to regulator with 3V to 36V operating range, requires high quality bypass capacitor to PGND1 with low impedance connection. |+| 8 | SERIES CAP1 | passive | Mid-point connection of series bypass capacitors between VIN1 and PGND1, can be left floating or connected to additional series capacitors. |+| 9 | PGND1 | power_in | Power return for internal low-side MOSFET with low impedance connection required to PGND2, PGND3, and bypass capacitors to VIN1. |+| 10 | SYNC | input | Synchronization and mode selection input: connect to AGND for auto/PFM mode or to VCC for FPWM mode, accepts external clock 200kHz to 2.2MHz. |+| 11 | PG1/MODE | output | Open-drain power-good flag for channel 1 in dual output mode; mode selection pin for secondary device in single output configuration. |+| 12 | EN1 | input | Active high enable input with 1.375V rising threshold that enables output 1 switching in dual mode or all phases in single mode. |+| 13 | BIAS & VOSNS1 | input | Output voltage sense and internal LDO bias input from non-switching inductor side, typical 3.3V to 5V with optional 0.1μF bypass capacitor. |+| 14 | FB1 | input | Feedback input to channel 1 error amplifier with 0.8V regulation threshold, sets output voltage 0.8V to 20V via resistive divider. |+| 15 | VCC | power_out | Internal LDO regulated output 3.1V to 3.7V supplying control circuits, requires 1μF bypass capacitor to AGND. |+| 16 | AGND | power_in | Analog ground reference for internal voltage reference, error amplifier, and feedback network circuits. |+| 17 | RT | input | Frequency programming input with resistor to AGND setting switching frequency from 100kHz to 2.2MHz range. |+| 18 | FB2/SS | input | Feedback input for channel 2 in dual output mode; soft-start capacitor input for external current limiting in single output mode. |+| 19 | VOSNS2/COMP | input | Output voltage sense for channel 2 fixed configurations in dual output mode; error amplifier output requiring RC compensation in single output mode. |+| 20 | EN2 | input | Active high enable input with 1.375V rising threshold that controls output 2 switching in dual mode or secondary phases in single mode. |+| 21 | CONFIG | input | Configuration pin with resistor to AGND selecting dual/single output mode, phase count (2/4/6), and spread spectrum modulation enable. |+| 22 | PG2/SYNCOUT | output | Open-drain power-good flag for channel 2 in dual output mode; phase-shifted synchronization clock output to secondary devices in single output mode. |+| 23 | PGND2 | power_in | Power return for internal low-side MOSFET with low impedance connection required to PGND1, PGND3, and bypass capacitors to VIN2. |+| 24 | SERIES CAP2 | passive | Mid-point connection of series bypass capacitors between VIN2 and PGND2, can be left floating for better pin FMEA. |+| 25 | PGND4 | power_in | Power return and thermal heat sink connection point requiring direct solder to system ground plane for thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(5x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LMQ644A2QRXARQ1`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`+- 3D model: VQFN-24-EP(5x4) (KiCad packages3D, STEP)+- 3D model files: `lmq644a2qrxarq1-etched.step` / `lmq644a2qrxarq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmq644a2qrxarq1.step` / `lmq644a2qrxarq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com.cn/cn/lit/ds/symlink/lmq644a2-q1.pdf?ts=1739432285907&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D19%2526searchTerm%253DLMQ644A2QRXARQ1) (64 pp, sha256 `cff23df7edb8e196`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmq644a2qrxarq1-datasheet.pdf)
page.jsonadded+245@@ -0,0 +1,245 @@+{+ "slug": "lmq644a2qrxarq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VQFN-24-EP(5x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lmq644a2qrxarq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmq644a2qrxarq1.kicad_sym",+ "lmq644a2qrxarq1.kicad_mod",+ "lmq644a2qrxarq1.glb",+ "lmq644a2qrxarq1.step",+ "lmq644a2qrxarq1.lbr",+ "docs/hero.png",+ "docs/lmq644a2qrxarq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LMQ644A2QRXARQ1",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(5x4)",+ "pin_count": 25,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/lmq644a2-q1.pdf?ts=1739432285907&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D19%2526searchTerm%253DLMQ644A2QRXARQ1",+ "parts": {+ "symbol": "lmq644a2qrxarq1.kicad_sym",+ "footprint": "lmq644a2qrxarq1.kicad_mod",+ "model_3d": "lmq644a2qrxarq1-etched.glb",+ "model_3d_plain": "lmq644a2qrxarq1.glb",+ "model_3d_step": "lmq644a2qrxarq1-etched.step",+ "model_3d_step_plain": "lmq644a2qrxarq1.step",+ "lbr": "lmq644a2qrxarq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C22394339"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN2",+ "type": "power_in",+ "description": "Input supply to regulator with 3V to 36V operating range, requires high quality bypass capacitor to PGND2 with low impedance connection."+ },+ {+ "number": "2",+ "name": "BOOT2",+ "type": "passive",+ "description": "Bootstrap capacitor supply for channel 2 high-side gate driver, charged through internal diode from SW2 when low."+ },+ {+ "number": "3",+ "name": "SW2",+ "type": "output",+ "description": "Channel 2 switching node internally connected to high-side NMOS source and low-side NMOS drain, connects to power inductor."+ },+ {+ "number": "4",+ "name": "PGND3",+ "type": "power_in",+ "description": "Power return for internal low-side MOSFET with low impedance connection required to PGND1, PGND2, and exposed pad."+ },+ {+ "number": "5",+ "name": "SW1",+ "type": "output",+ "description": "Channel 1 switching node internally connected to high-side NMOS source and low-side NMOS drain, connects to power inductor."+ },+ {+ "number": "6",+ "name": "BOOT1",+ "type": "passive",+ "description": "Bootstrap capacitor supply for channel 1 high-side gate driver, charged through internal diode from SW1 when low."+ },+ {+ "number": "7",+ "name": "VIN1",+ "type": "power_in",+ "description": "Input supply to regulator with 3V to 36V operating range, requires high quality bypass capacitor to PGND1 with low impedance connection."+ },+ {+ "number": "8",+ "name": "SERIES CAP1",+ "type": "passive",+ "description": "Mid-point connection of series bypass capacitors between VIN1 and PGND1, can be left floating or connected to additional series capacitors."+ },+ {+ "number": "9",+ "name": "PGND1",+ "type": "power_in",+ "description": "Power return for internal low-side MOSFET with low impedance connection required to PGND2, PGND3, and bypass capacitors to VIN1."+ },+ {+ "number": "10",+ "name": "SYNC",+ "type": "input",+ "description": "Synchronization and mode selection input: connect to AGND for auto/PFM mode or to VCC for FPWM mode, accepts external clock 200kHz to 2.2MHz."+ },+ {+ "number": "11",+ "name": "PG1/MODE",+ "type": "output",+ "description": "Open-drain power-good flag for channel 1 in dual output mode; mode selection pin for secondary device in single output configuration."+ },+ {+ "number": "12",+ "name": "EN1",+ "type": "input",+ "description": "Active high enable input with 1.375V rising threshold that enables output 1 switching in dual mode or all phases in single mode."+ },+ {+ "number": "13",+ "name": "BIAS & VOSNS1",+ "type": "input",+ "description": "Output voltage sense and internal LDO bias input from non-switching inductor side, typical 3.3V to 5V with optional 0.1μF bypass capacitor."+ },+ {+ "number": "14",+ "name": "FB1",+ "type": "input",+ "description": "Feedback input to channel 1 error amplifier with 0.8V regulation threshold, sets output voltage 0.8V to 20V via resistive divider."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal LDO regulated output 3.1V to 3.7V supplying control circuits, requires 1μF bypass capacitor to AGND."+ },+ {+ "number": "16",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground reference for internal voltage reference, error amplifier, and feedback network circuits."+ },+ {+ "number": "17",+ "name": "RT",+ "type": "input",+ "description": "Frequency programming input with resistor to AGND setting switching frequency from 100kHz to 2.2MHz range."+ },+ {+ "number": "18",+ "name": "FB2/SS",+ "type": "input",+ "description": "Feedback input for channel 2 in dual output mode; soft-start capacitor input for external current limiting in single output mode."+ },+ {+ "number": "19",+ "name": "VOSNS2/COMP",+ "type": "input",+ "description": "Output voltage sense for channel 2 fixed configurations in dual output mode; error amplifier output requiring RC compensation in single output mode."+ },+ {+ "number": "20",+ "name": "EN2",+ "type": "input",+ "description": "Active high enable input with 1.375V rising threshold that controls output 2 switching in dual mode or secondary phases in single mode."+ },+ {+ "number": "21",+ "name": "CONFIG",+ "type": "input",+ "description": "Configuration pin with resistor to AGND selecting dual/single output mode, phase count (2/4/6), and spread spectrum modulation enable."+ },+ {+ "number": "22",+ "name": "PG2/SYNCOUT",+ "type": "output",+ "description": "Open-drain power-good flag for channel 2 in dual output mode; phase-shifted synchronization clock output to secondary devices in single output mode."+ },+ {+ "number": "23",+ "name": "PGND2",+ "type": "power_in",+ "description": "Power return for internal low-side MOSFET with low impedance connection required to PGND1, PGND3, and bypass capacitors to VIN2."+ },+ {+ "number": "24",+ "name": "SERIES CAP2",+ "type": "passive",+ "description": "Mid-point connection of series bypass capacitors between VIN2 and PGND2, can be left floating for better pin FMEA."+ },+ {+ "number": "25",+ "name": "PGND4",+ "type": "power_in",+ "description": "Power return and thermal heat sink connection point requiring direct solder to system ground plane for thermal and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: BOOT1 (pin 2) and BOOT2 (pin 6) are bootstrap capacitor connection pins charged by internal diodes; ; Dual-function pins change names/functions based on single vs dual output configuration mode (PG1/MOD"+ ],+ "pages_sent": 64,+ "cost_usd": 0.8228,+ "at": "2026-09-23T01:36:41"+ },+ "datasheet": {+ "url": "https://www.ti.com.cn/cn/lit/ds/symlink/lmq644a2-q1.pdf?ts=1739432285907&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D19%2526searchTerm%253DLMQ644A2QRXARQ1",+ "pages": 64,+ "sha256": "cff23df7edb8e196",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}