component

LMP93601NHZT

Public Made by Adom

by adom

Texas Instruments Analog Front End (AFE), WQFN-24(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentdata acquisitionlmp93601nhztfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMP93601NHZT

Texas Instruments · Analog Front End (AFE) · WQFN-24(4x5)

LMP93601NHZT from Texas Instruments, in a WQFN-24(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCM bidirectional Sensor common mode bias voltage, analog input/output pin.
2 INP1 input Input signal positive pin for channel 1.
3 INN1 input Input signal negative pin for channel 1.
4 INP2 input Input signal positive pin for channel 2.
5 INN2 input Input signal negative pin for channel 2.
6 INP3 input Input signal positive pin for channel 3.
7 INN3 input Input signal negative pin for channel 3.
8 AGND power_in Analog ground; must be connected to system ground and cannot be left floating.
9 PWDNB input Enable input, active low.
10 RSTB input Master reset input, active low.
11 SYNC input Sync input, active high.
12 XCLK input External clock source input.
13 DRDYB output Data ready signal output, active low, push-pull.
14 SDI input Serial data input.
15 CSB input Chip select input, active low.
16 IOGND power_in Digital IO ground; must be connected to system ground and cannot be left floating.
17 SCLK input Serial interface clock input.
18 SDO output Serial data output, push-pull.
19 IOVDD power_in Digital IO supply rail; must be between 2.7 V and AVDD, and never higher than AVDD.
20 DGND power_in Digital ground; must be connected to system ground and cannot be left floating.
21 AGND power_in Analog ground; must be connected to system ground and cannot be left floating.
22 XCAP2 passive Digital LDO external capacitor 2 connection; voltage between XCAP2 and any GND must not exceed 2.2 V.
23 XCAP1 passive Analog external capacitor 1 connection.
24 AVDD power_in Analog supply rail; recommended operating range 2.7 V to 5.5 V, absolute maximum 6.0 V.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24(4x5)
Category Data Acquisition
Pins 25

CAD (KiCad official)

  • Symbol: LMP93601NHZT
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: WQFN-24(4x5) (KiCad packages3D, STEP)
  • 3D model files: lmp93601nhzt-etched.step / lmp93601nhzt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmp93601nhzt.step / lmp93601nhzt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 fd9c79d35fbba76f, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF