main
Ray
lmp8481mmx-s: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e9a905f
LMP8481MMX-S
Texas Instruments · Current Sense Amplifiers · VSSOP-8
LMP8481MMX-S from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RSP | input | Positive current-sense input. Connect to the high-side (source) end of the external sense resistor. Common-mode range 4 V to 76 V; input bias current ~7 µA. |
| 2 | VCC | power_in | Positive supply voltage input, 4.5 V to 76 V (85 V abs max). Quiescent current < 100 µA typical. Decouple to GND with a local bypass capacitor. |
| 3 | NC | unconnected | No connect - not internally connected. Leave floating or tie to GND for board robustness. |
| 4 | GND | power_in | Device ground return for the low-voltage supply and internal reference circuitry. |
| 5 | VOUT | output | Buffered analog voltage output equal to gain (60 V/V for -S) × (V(RSP) - V(RSN)) plus the reference offset set by REFA/REFB. Drives >5 mA into loads; recommended RL ≥ 100 kΩ for full accuracy. Output limited to min(VCC + 0.3 V, +20 V). |
| 6 | REFB | input | Reference voltage 'B' input for the LMP8481. Combined with REFA it sets the VOUT zero-current level for bidirectional sensing; when REFA and REFB are tied together the range is -0.3 V to min(VCC - 1.5 V, +6 V); with the other REF pin grounded a single REF pin may swing up to +12 V (see recommended operating conditions). |
| 7 | REFA | input | Reference voltage 'A' input for the LMP8481. Paired with REFB to program the VOUT offset for bidirectional current sensing. Typical configuration: tie REFA and REFB together to a mid-supply reference, or ground one and drive the other for split biasing. |
| 8 | RSN | input | Negative current-sense input. Connect to the load-side end of the external sense resistor. Differential input voltage range ±85 V max; input bias current ~7 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LMP8481MMX-S/NOPBLMP8481MMX-H/NOPBLMP8481MMX-T/NOPBLMP8481MM-H/NOPBLMP8481MM-T/NOPBLMP8481MME-H/NOPBLMP8481MME-T/NOPB
CAD (KiCad official)
- Symbol:
LMP8481MMX-S - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lmp8481mmx-s-etched.step/lmp8481mmx-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmp8481mmx-s.step/lmp8481mmx-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
647bd3a212d2fefb, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMP8481MMX-S
**Texas Instruments** · Current Sense Amplifiers · VSSOP-8
LMP8481MMX-S from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RSP | input | Positive current-sense input. Connect to the high-side (source) end of the external sense resistor. Common-mode range 4 V to 76 V; input bias current ~7 µA. |
| 2 | VCC | power_in | Positive supply voltage input, 4.5 V to 76 V (85 V abs max). Quiescent current < 100 µA typical. Decouple to GND with a local bypass capacitor. |
| 3 | NC | unconnected | No connect - not internally connected. Leave floating or tie to GND for board robustness. |
| 4 | GND | power_in | Device ground return for the low-voltage supply and internal reference circuitry. |
| 5 | VOUT | output | Buffered analog voltage output equal to gain (60 V/V for -S) × (V(RSP) - V(RSN)) plus the reference offset set by REFA/REFB. Drives >5 mA into loads; recommended RL ≥ 100 kΩ for full accuracy. Output limited to min(VCC + 0.3 V, +20 V). |
| 6 | REFB | input | Reference voltage 'B' input for the LMP8481. Combined with REFA it sets the VOUT zero-current level for bidirectional sensing; when REFA and REFB are tied together the range is -0.3 V to min(VCC - 1.5 V, +6 V); with the other REF pin grounded a single REF pin may swing up to +12 V (see recommended operating conditions). |
| 7 | REFA | input | Reference voltage 'A' input for the LMP8481. Paired with REFB to program the VOUT offset for bidirectional current sensing. Typical configuration: tie REFA and REFB together to a mid-supply reference, or ground one and drive the other for split biasing. |
| 8 | RSN | input | Negative current-sense input. Connect to the load-side end of the external sense resistor. Differential input voltage range ±85 V max; input bias current ~7 µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LMP8481MMX-S/NOPB`
- `LMP8481MMX-H/NOPB`
- `LMP8481MMX-T/NOPB`
- `LMP8481MM-H/NOPB`
- `LMP8481MM-T/NOPB`
- `LMP8481MME-H/NOPB`
- `LMP8481MME-T/NOPB`
## CAD (KiCad official)
- Symbol: `LMP8481MMX-S`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lmp8481mmx-s-etched.step` / `lmp8481mmx-s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmp8481mmx-s.step` / `lmp8481mmx-s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmp8481) (None pp, sha256 `647bd3a212d2fefb`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmp8481mmx-s-datasheet.pdf)