main
Ray Publish 0.1.0 c7a0cb9
{
  "slug": "lmp7704ma",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lmp7704ma",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmp7704ma.kicad_sym",
    "lmp7704ma.kicad_mod",
    "lmp7704ma.glb",
    "lmp7704ma.step",
    "lmp7704ma.lbr",
    "docs/hero.png",
    "docs/lmp7704ma-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmp7704ma-hero.glb",
    "lmp7704ma-hero.overlay.json",
    "lmp7704ma-etched.glb"
  ],
  "component": {
    "mpn": "LMP7704MA",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmp7704.pdf",
    "parts": {
      "symbol": "lmp7704ma.kicad_sym",
      "footprint": "lmp7704ma.kicad_mod",
      "model_3d": "lmp7704ma-hero.glb",
      "model_3d_plain": "lmp7704ma-etched.glb",
      "model_3d_step": "lmp7704ma-etched.step",
      "model_3d_step_plain": "lmp7704ma.step",
      "lbr": "lmp7704ma.lbr"
    },
    "distributor_links": {
      "lcsc": "C206105",
      "mouser": "926-LMP7704MA/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T08:57:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 960 calls left today"
      },
      "mouser": {
        "pn": "926-LMP7704MA/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT A",
        "type": "output",
        "description": "Output of amplifier A, which swings within 40 mV of either supply rail."
      },
      {
        "number": "2",
        "name": "IN A-",
        "type": "input",
        "description": "Inverting input of amplifier A; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "3",
        "name": "IN A+",
        "type": "input",
        "description": "Noninverting input of amplifier A; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "4",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply; the supply voltage (VS = V+ − V−) is specified from 2.7 V to 12 V."
      },
      {
        "number": "5",
        "name": "IN B+",
        "type": "input",
        "description": "Noninverting input of amplifier B; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "6",
        "name": "IN B-",
        "type": "input",
        "description": "Inverting input of amplifier B; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "7",
        "name": "OUT B",
        "type": "output",
        "description": "Output of amplifier B, which swings within 40 mV of either supply rail."
      },
      {
        "number": "8",
        "name": "OUT C",
        "type": "output",
        "description": "Output of amplifier C, which swings within 40 mV of either supply rail."
      },
      {
        "number": "9",
        "name": "IN C-",
        "type": "input",
        "description": "Inverting input of amplifier C; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "10",
        "name": "IN C+",
        "type": "input",
        "description": "Noninverting input of amplifier C; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "11",
        "name": "V–",
        "type": "power_in",
        "description": "Negative supply; it is the reference for the supply voltage VS = V+ − V− and is 0 V in the datasheet's single-supply test conditions."
      },
      {
        "number": "12",
        "name": "IN D+",
        "type": "input",
        "description": "Noninverting input of amplifier D; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "13",
        "name": "IN D-",
        "type": "input",
        "description": "Inverting input of amplifier D; the pin voltage must stay within the absolute maximum range of V- − 0.3 V to V+ + 0.3 V."
      },
      {
        "number": "14",
        "name": "OUT D",
        "type": "output",
        "description": "Output of amplifier D, which swings within 40 mV of either supply rail."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin-function table for the 14-pin SOIC and TSSOP packages (LMP7704 D or PW).; The LMP7704 pin-function table also contains generic single-amplifier rows (IN+, IN–, NC, OUT) with ; The 'within 40 mV of either rail' output statement and the input absolute-maximum limit come from th"
        ],
        "pages_sent": 54,
        "cost_usd": 0.1854,
        "at": "2026-11-10T08:56:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmp7704.pdf",
        "pages": 54,
        "sha256": "dac093bff808da9d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmp7704ma.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmp7704ma-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "299f0a49c966344077b52193b48f355d78300795d57934487494c080553a4075",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "D0014A",
      "source_page": 45,
      "D": {
        "nom_mm": 8.65,
        "range_mm": [
          8.55,
          8.75
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.75,
        "range_mm": [
          null,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lmp7704ma.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}