main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmp7300mmx: viewers rendered from the public page · Ray
lmp7300mmx-etched.glb lmp7300mmx: factory component page (tier=mfr) · Ray
lmp7300mmx-etched.step lmp7300mmx: factory component page (tier=mfr) · Ray
lmp7300mmx-hero.glb lmp7300mmx: hero GLB from the etched model (keeps the MPN mark) · Ray
lmp7300mmx-hero.overlay.json lmp7300mmx: hero GLB from the etched model (keeps the MPN mark) · Ray
lmp7300mmx.glb Publish 0.1.0 · Ray
lmp7300mmx.kicad_mod Publish 0.1.0 · Ray
lmp7300mmx.kicad_sym Publish 0.1.0 · Ray
lmp7300mmx.lbr Publish 0.1.0 · Ray
lmp7300mmx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LMP7300MMX

Texas Instruments · Comparators · VSSOP-8

LMP7300MMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 +IN input Noninverting comparator input with a common-mode range from 1 V above the negative rail to, and including, the positive rail; internal ESD diodes clamp the input to a safe level if it exceeds the rails.
2 -IN input Inverting comparator input with a common-mode range from 1 V above the negative rail to, and including, the positive rail; internal ESD diodes clamp the input to a safe level if it exceeds the rails.
3 GND power_in Ground pin that may be connected to a negative DC supply for dual-supply operation (decouple with a 0.1-µF ceramic capacitor to ground in that case); the internal reference output is referenced to this pin.
4 OUT output Open-collector comparator output that may be pulled up to a maximum of +12 V with respect to the ground pin, irrespective of supply voltage.
5 HYSTN input Negative hysteresis pin that sets the lower trip voltage VIL, with a common-mode range from 1 V above the negative rail to VCC; the input must fall below VIL for the output to switch from high to low.
6 HYSTP input Positive hysteresis pin that sets the upper trip voltage VIH, with a common-mode range from 1 V above the negative rail to VCC; the input must rise above VIH for the output to switch from low to high.
7 REF output Reference voltage output of the 2.048-V band-gap precision reference.
8 V+ power_in Positive supply terminal with a supply voltage range of 2.7 V to 12 V; decouple with a 0.1-µF ceramic capacitor to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature (operating free-air) -40 125 °C Over operating free-air temperature range 4
Supply Voltage (VS = V+, V−) VS 2.7 12 V VS = V+, V− 4
Supply voltage (VS = V+, V−) VS 13.6 V 4
Infrared or convection soldering temperature 235 °C 20 s 4
Wave soldering lead temperature 260 °C 10 s 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply Current IS 9 12 µA 2.7-V table: TA = 25°C, RPULLUP = Open 5
Supply Current IS 17 µA 2.7-V table: TJ = TA, RPULLUP = Open 5
Input Offset Voltage (VSSOP) VOS -1 0.07 1 mV 2.7-V table: TA = 25°C, VCM = V+/2, VSSOP 5
Input Offset Voltage (VSSOP) VOS -2.2 2.2 mV 2.7-V table: TJ = TA, VCM = V+/2, VSSOP 5
Input Bias Current IB 3 nA 2.7-V table: /VID/ < 2.5 V, TA = 25°C 5
Input Bias Current IB 4 nA 2.7-V table: /VID/ < 2.5 V, TJ = TA 5
Input Offset Current IOS 0.15 0.5 nA 2.7-V table 5
Common Mode Rejection Ratio CMRR 80 100 dB 2.7-V table: 1 V < VCM < 2.7 V 5
Power Supply Rejection Ratio PSRR 80 100 dB 2.7-V table: V+ = 2.7 V to 12 V 5
Output Voltage Low VOL 0.25 0.4 V 2.7-V table: ILOAD = 10 mA, TA = 25°C 5
Output Voltage Low VOL 0.5 V 2.7-V table: ILOAD = 10 mA, TJ = TA 5
Hysteresis Leakage Current IHYS 1.2 3 nA 2.7-V table: TA = 25°C 5
Hysteresis Leakage Current IHYS 4 nA 2.7-V table: TJ = TA 5
Propagation Delay (High to Low) TPD 12 17 µs 2.7-V table: Overdrive = 10 mV, CL = 10 pF 5
Propagation Delay (High to Low) TPD 4.5 7.6 µs 2.7-V table: Overdrive = 100 mV, CL = 10 pF 5
Reference Voltage (VSSOP) VO 2.043 2.048 2.056 V 2.7-V table: VSSOP 5
Line Regulation 14 80 µV/V VCC = 2.7 V to 12 V 5
Load Regulation 0.2 0.5 mV/mA 2.7-V table: IOUT = 0 to 1 mA 5
Supply Current IS 10 13 µA 5-V table: TA = 25°C, RPULLUP = Open 6
Supply Current IS 18 µA 5-V table: TJ = TA, RPULLUP = Open 6
Input Offset Voltage (VSSOP) VOS -1 0.07 1 mV 5-V table: TA = 25°C, VCM = V+/2, VSSOP 6
Input Offset Voltage (VSSOP) VOS -2.2 2.2 mV 5-V table: TJ = TA, VCM = V+/2, VSSOP 6
Input Bias Current IB 1.2 3 nA 5-V table: /VID/ < 2.5 V, TA = 25°C 6
Input Bias Current IB 4 nA 5-V table: /VID/ < 2.5 V, TJ = TA 6
Input Offset Current IOS 0.15 0.5 nA 5-V table 6
Common Mode Rejection Ratio CMRR 80 100 dB 5-V table: 1 ≤ VCM ≤ 5 V 6
Power Supply Rejection Ratio PSRR 80 100 dB 5-V table: V+ = 2.7 V to 12 V 6
Output Voltage Low VOL 0.25 0.4 V 5-V table: ILOAD = 10 mA 6
Hysteresis Leakage Current IHYS 1.2 3 nA 5-V table: TA = 25°C 6
Hysteresis Leakage Current IHYS 4 nA 5-V table: TJ = TA 6
Propagation Delay (High to Low) TPD 12 15 µs 5-V table: Overdrive = 10 mV, CL = 10 pF 6
Propagation Delay (High to Low) TPD 4 7 µs 5-V table: Overdrive = 100 mV, CL = 10 pF 6
Reference Voltage (VSSOP) VO 2.043 2.048 2.056 V 5-V table: VSSOP 6
Line Regulation 14 80 µV/V VCC = 2.7 V to 12 V 6
Load Regulation 0.2 0.5 mV/mA 5-V table: IOUT = 0 to 1 mA 6
Supply Current IS 11 14 µA 12-V table: TA = 25°C, RPULLUP = Open 7
Supply Current IS 20 µA 12-V table: TJ = TA, RPULLUP = Open 7
Input Offset Voltage (VSSOP) VOS -1 0.08 1 mV 12-V table: TA = 25°C, VCM = V+/2, VSSOP 7
Input Offset Voltage (VSSOP) VOS -2.2 2.2 mV 12-V table: TJ = TA, VCM = V+/2, VSSOP 7
Input Bias Current IB 1.2 3 nA 12-V table: /VID/ > 2.5 V, TA = 25°C 7
Input Bias Current IB 4 nA 12-V table: /VID/ > 2.5 V, TJ = TA 7
Input Offset Current IOS 0.15 0.5 nA 12-V table 7
Common Mode Rejection Ratio CMRR 80 100 dB 12-V table: 1 V ≤ VCM ≤ 12 V 7
Power Supply Rejection Ratio PSRR 80 100 dB 12-V table: V+ = 2.7 V to 12 V 7
Output Voltage Low VOL 0.25 0.4 V 12-V table: ILOAD = 10 mA 7
Hysteresis Leakage Current IHYS 1.2 3 nA 12-V table: TA = 25°C 7
Hysteresis Leakage Current IHYS 4 nA 12-V table: TJ = TA 7
Propagation Delay (High to Low) TPD 11 15 µs 12-V table: Overdrive = 10 mV, CL = 10 pF 7
Propagation Delay (High to Low) TPD 3.5 6.8 µs 12-V table: Overdrive = 100 mV, CL = 10 pF 7
Reference Voltage (VSSOP) VO 2.043 2.048 2.056 V 12-V table: TJ = 25°C, VSSOP 7
Line Regulation 14 80 µV/V VCC = 2.7 V to 12 V 7
Load Regulation 0.2 0.5 mV/mA 12-V table: IOUT = 0 to 1 mA 7
Junction-to-ambient thermal resistance (DGK VSSOP, 8 pins) RθJA 175.5 °C/W DGK (VSSOP) 8 pins, soldered to PC board 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LMP7300MMX
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmp7300mmx-etched.step / lmp7300mmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmp7300mmx.step / lmp7300mmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 9cfc88c9102c0010, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF