component
LMK1D1216RGZR
Public Made by Adomby adom
Texas Instruments Clock Buffers, Drivers, Distributors, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+86@@ -0,0 +1,86 @@+# LMK1D1216RGZR++**Texas Instruments** · Clock Buffers, Drivers, Distributors · VQFN-48-EP(7x7)++LMK1D1216RGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference. |+| 2 | IN_SEL | input | Input selection with internal 500-kΩ pullup and 320-kΩ pulldown resistor; logic 0 selects IN0, logic 1 selects IN1, open disables outputs. |+| 3 | IN1_P | input | Secondary differential input pair positive or single-ended input; accepts LVDS, LVPECL, LP-HCSL, HCSL, CML, or LVCMOS signals. |+| 4 | IN1_N | input | Secondary differential input pair negative or single-ended input; paired with IN1_P. |+| 5 | VAC_REF1 | output | Bias voltage output for capacitive coupled inputs; TI recommends connecting a 0.1-µF capacitor to GND on this pin. |+| 6 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 7 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 8 | VAC_REF0 | output | Bias voltage output for capacitive coupled inputs; TI recommends connecting a 0.1-µF capacitor to GND on this pin. |+| 9 | IN0_N | input | Primary differential input pair negative or single-ended input; paired with IN0_P. |+| 10 | IN0_P | input | Primary differential input pair positive or single-ended input; accepts LVDS, LVPECL, LP-HCSL, HCSL, CML, or LVCMOS signals up to 2 GHz. |+| 11 | AMP_SEL | input | Output amplitude swing select with internal 500-kΩ pullup and 320-kΩ pulldown; logic 0 or open selects standard/standard swing (350 mV), logic 1 selects boosted/boosted swing (500 mV). |+| 12 | GND | power_in | Ground reference. |+| 13 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 14 | OUT0_P | output | Differential LVDS output pair number 0 positive terminal; 50 Ω source impedance. |+| 15 | OUT0_N | output | Differential LVDS output pair number 0 negative terminal; paired with OUT0_P. |+| 16 | OUT1_P | output | Differential LVDS output pair number 1 positive terminal. |+| 17 | OUT1_N | output | Differential LVDS output pair number 1 negative terminal. |+| 18 | OUT2_P | output | Differential LVDS output pair number 2 positive terminal. |+| 19 | OUT2_N | output | Differential LVDS output pair number 2 negative terminal. |+| 20 | OUT3_P | output | Differential LVDS output pair number 3 positive terminal. |+| 21 | OUT3_N | output | Differential LVDS output pair number 3 negative terminal. |+| 22 | OUT4_P | output | Differential LVDS output pair number 4 positive terminal. |+| 23 | OUT4_N | output | Differential LVDS output pair number 4 negative terminal. |+| 24 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 25 | OUT5_P | output | Differential LVDS output pair number 5 positive terminal. |+| 26 | OUT5_N | output | Differential LVDS output pair number 5 negative terminal. |+| 27 | OUT6_P | output | Differential LVDS output pair number 6 positive terminal. |+| 28 | OUT6_N | output | Differential LVDS output pair number 6 negative terminal. |+| 29 | OUT7_P | output | Differential LVDS output pair number 7 positive terminal. |+| 30 | OUT7_N | output | Differential LVDS output pair number 7 negative terminal. |+| 31 | OUT8_P | output | Differential LVDS output pair number 8 positive terminal. |+| 32 | OUT8_N | output | Differential LVDS output pair number 8 negative terminal. |+| 33 | OUT9_P | output | Differential LVDS output pair number 9 positive terminal. |+| 34 | OUT9_N | output | Differential LVDS output pair number 9 negative terminal. |+| 35 | OUT10_P | output | Differential LVDS output pair number 10 positive terminal. |+| 36 | OUT10_N | output | Differential LVDS output pair number 10 negative terminal. |+| 37 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 38 | OUT11_P | output | Differential LVDS output pair number 11 positive terminal. |+| 39 | OUT11_N | output | Differential LVDS output pair number 11 negative terminal. |+| 40 | OUT12_P | output | Differential LVDS output pair number 12 positive terminal. |+| 41 | OUT12_N | output | Differential LVDS output pair number 12 negative terminal. |+| 42 | OUT13_P | output | Differential LVDS output pair number 13 positive terminal. |+| 43 | OUT13_N | output | Differential LVDS output pair number 13 negative terminal. |+| 44 | OUT14_P | output | Differential LVDS output pair number 14 positive terminal. |+| 45 | OUT14_N | output | Differential LVDS output pair number 14 negative terminal. |+| 46 | OUT15_P | output | Differential LVDS output pair number 15 positive terminal. |+| 47 | OUT15_N | output | Differential LVDS output pair number 15 negative terminal. |+| 48 | VDD | power_in | Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance). |+| 49 | DAP | power_in | Die attach pad (thermal pad); connect to printed circuit board ground plane for heat dissipation and mechanical support. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-48-EP(7x7) |+| Category | Clock/Timing |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `LMK1D1216RGZR`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `lmk1d1216rgzr-etched.step` / `lmk1d1216rgzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk1d1216rgzr.step` / `lmk1d1216rgzr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmk1d1212) (37 pp, sha256 `002c4e8b0e1c8e35`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmk1d1216rgzr-datasheet.pdf)
page.jsonadded+387@@ -0,0 +1,387 @@+{+ "slug": "lmk1d1216rgzr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Clock Buffers, Drivers, Distributors, VQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "clock-timing",+ "lmk1d1216rgzr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmk1d1216rgzr.kicad_sym",+ "lmk1d1216rgzr.kicad_mod",+ "lmk1d1216rgzr.glb",+ "lmk1d1216rgzr.step",+ "lmk1d1216rgzr.lbr",+ "docs/hero.png",+ "docs/lmk1d1216rgzr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LMK1D1216RGZR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "Clock/Timing",+ "subcategory": "Clock Buffers, Drivers, Distributors",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmk1d1212",+ "parts": {+ "symbol": "lmk1d1216rgzr.kicad_sym",+ "footprint": "lmk1d1216rgzr.kicad_mod",+ "model_3d": "lmk1d1216rgzr-etched.glb",+ "model_3d_plain": "lmk1d1216rgzr.glb",+ "model_3d_step": "lmk1d1216rgzr-etched.step",+ "model_3d_step_plain": "lmk1d1216rgzr.step",+ "lbr": "lmk1d1216rgzr.lbr"+ },+ "distributor_links": {+ "lcsc": "C3613461"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "2",+ "name": "IN_SEL",+ "type": "input",+ "description": "Input selection with internal 500-kΩ pullup and 320-kΩ pulldown resistor; logic 0 selects IN0, logic 1 selects IN1, open disables outputs."+ },+ {+ "number": "3",+ "name": "IN1_P",+ "type": "input",+ "description": "Secondary differential input pair positive or single-ended input; accepts LVDS, LVPECL, LP-HCSL, HCSL, CML, or LVCMOS signals."+ },+ {+ "number": "4",+ "name": "IN1_N",+ "type": "input",+ "description": "Secondary differential input pair negative or single-ended input; paired with IN1_P."+ },+ {+ "number": "5",+ "name": "VAC_REF1",+ "type": "output",+ "description": "Bias voltage output for capacitive coupled inputs; TI recommends connecting a 0.1-µF capacitor to GND on this pin."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "8",+ "name": "VAC_REF0",+ "type": "output",+ "description": "Bias voltage output for capacitive coupled inputs; TI recommends connecting a 0.1-µF capacitor to GND on this pin."+ },+ {+ "number": "9",+ "name": "IN0_N",+ "type": "input",+ "description": "Primary differential input pair negative or single-ended input; paired with IN0_P."+ },+ {+ "number": "10",+ "name": "IN0_P",+ "type": "input",+ "description": "Primary differential input pair positive or single-ended input; accepts LVDS, LVPECL, LP-HCSL, HCSL, CML, or LVCMOS signals up to 2 GHz."+ },+ {+ "number": "11",+ "name": "AMP_SEL",+ "type": "input",+ "description": "Output amplitude swing select with internal 500-kΩ pullup and 320-kΩ pulldown; logic 0 or open selects standard/standard swing (350 mV), logic 1 selects boosted/boosted swing (500 mV)."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "13",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "14",+ "name": "OUT0_P",+ "type": "output",+ "description": "Differential LVDS output pair number 0 positive terminal; 50 Ω source impedance."+ },+ {+ "number": "15",+ "name": "OUT0_N",+ "type": "output",+ "description": "Differential LVDS output pair number 0 negative terminal; paired with OUT0_P."+ },+ {+ "number": "16",+ "name": "OUT1_P",+ "type": "output",+ "description": "Differential LVDS output pair number 1 positive terminal."+ },+ {+ "number": "17",+ "name": "OUT1_N",+ "type": "output",+ "description": "Differential LVDS output pair number 1 negative terminal."+ },+ {+ "number": "18",+ "name": "OUT2_P",+ "type": "output",+ "description": "Differential LVDS output pair number 2 positive terminal."+ },+ {+ "number": "19",+ "name": "OUT2_N",+ "type": "output",+ "description": "Differential LVDS output pair number 2 negative terminal."+ },+ {+ "number": "20",+ "name": "OUT3_P",+ "type": "output",+ "description": "Differential LVDS output pair number 3 positive terminal."+ },+ {+ "number": "21",+ "name": "OUT3_N",+ "type": "output",+ "description": "Differential LVDS output pair number 3 negative terminal."+ },+ {+ "number": "22",+ "name": "OUT4_P",+ "type": "output",+ "description": "Differential LVDS output pair number 4 positive terminal."+ },+ {+ "number": "23",+ "name": "OUT4_N",+ "type": "output",+ "description": "Differential LVDS output pair number 4 negative terminal."+ },+ {+ "number": "24",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "25",+ "name": "OUT5_P",+ "type": "output",+ "description": "Differential LVDS output pair number 5 positive terminal."+ },+ {+ "number": "26",+ "name": "OUT5_N",+ "type": "output",+ "description": "Differential LVDS output pair number 5 negative terminal."+ },+ {+ "number": "27",+ "name": "OUT6_P",+ "type": "output",+ "description": "Differential LVDS output pair number 6 positive terminal."+ },+ {+ "number": "28",+ "name": "OUT6_N",+ "type": "output",+ "description": "Differential LVDS output pair number 6 negative terminal."+ },+ {+ "number": "29",+ "name": "OUT7_P",+ "type": "output",+ "description": "Differential LVDS output pair number 7 positive terminal."+ },+ {+ "number": "30",+ "name": "OUT7_N",+ "type": "output",+ "description": "Differential LVDS output pair number 7 negative terminal."+ },+ {+ "number": "31",+ "name": "OUT8_P",+ "type": "output",+ "description": "Differential LVDS output pair number 8 positive terminal."+ },+ {+ "number": "32",+ "name": "OUT8_N",+ "type": "output",+ "description": "Differential LVDS output pair number 8 negative terminal."+ },+ {+ "number": "33",+ "name": "OUT9_P",+ "type": "output",+ "description": "Differential LVDS output pair number 9 positive terminal."+ },+ {+ "number": "34",+ "name": "OUT9_N",+ "type": "output",+ "description": "Differential LVDS output pair number 9 negative terminal."+ },+ {+ "number": "35",+ "name": "OUT10_P",+ "type": "output",+ "description": "Differential LVDS output pair number 10 positive terminal."+ },+ {+ "number": "36",+ "name": "OUT10_N",+ "type": "output",+ "description": "Differential LVDS output pair number 10 negative terminal."+ },+ {+ "number": "37",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "38",+ "name": "OUT11_P",+ "type": "output",+ "description": "Differential LVDS output pair number 11 positive terminal."+ },+ {+ "number": "39",+ "name": "OUT11_N",+ "type": "output",+ "description": "Differential LVDS output pair number 11 negative terminal."+ },+ {+ "number": "40",+ "name": "OUT12_P",+ "type": "output",+ "description": "Differential LVDS output pair number 12 positive terminal."+ },+ {+ "number": "41",+ "name": "OUT12_N",+ "type": "output",+ "description": "Differential LVDS output pair number 12 negative terminal."+ },+ {+ "number": "42",+ "name": "OUT13_P",+ "type": "output",+ "description": "Differential LVDS output pair number 13 positive terminal."+ },+ {+ "number": "43",+ "name": "OUT13_N",+ "type": "output",+ "description": "Differential LVDS output pair number 13 negative terminal."+ },+ {+ "number": "44",+ "name": "OUT14_P",+ "type": "output",+ "description": "Differential LVDS output pair number 14 positive terminal."+ },+ {+ "number": "45",+ "name": "OUT14_N",+ "type": "output",+ "description": "Differential LVDS output pair number 14 negative terminal."+ },+ {+ "number": "46",+ "name": "OUT15_P",+ "type": "output",+ "description": "Differential LVDS output pair number 15 positive terminal."+ },+ {+ "number": "47",+ "name": "OUT15_N",+ "type": "output",+ "description": "Differential LVDS output pair number 15 negative terminal."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply; accepts 1.8 V, 2.5 V, or 3.3 V (see recommended operating conditions for tolerance)."+ },+ {+ "number": "49",+ "name": "DAP",+ "type": "power_in",+ "description": "Die attach pad (thermal pad); connect to printed circuit board ground plane for heat dissipation and mechanical support."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 37,+ "cost_usd": 0.4464,+ "at": "2026-09-17T22:06:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmk1d1212",+ "pages": 37,+ "sha256": "002c4e8b0e1c8e35",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}