Generated by kicad-footprint-generator · KiCad file format 20260206
LMK1D1212RHAR
Texas Instruments · Clock Buffers, Drivers · VQFN-40(6x6)
LMK1D1212RHAR from Texas Instruments, in a VQFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN_SEL | input | Input selection pin with internal 500-kΩ pullup and 320-kΩ pulldown resistor that selects the input port (see Table 8-2); left open it disables the outputs (static low). |
| 2 | IN1_P | input | Secondary clock input, positive side of differential pair or single-ended input. |
| 3 | IN1_N | input | Secondary clock input, negative side of differential pair or single-ended input. |
| 4 | VAC_REF1 | output | Bias voltage output for capacitively coupled inputs; if used, TI recommends a 0.1-µF capacitor to GND on this pin. |
| 5 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 6 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 7 | VAC_REF0 | output | Bias voltage output for capacitively coupled inputs; if used, TI recommends a 0.1-µF capacitor to GND on this pin. |
| 8 | IN0_P | input | Primary clock input, positive side of differential pair or single-ended input. |
| 9 | IN0_N | input | Primary clock input, negative side of differential pair or single-ended input. |
| 10 | AMP_SEL | input | Output amplitude swing select with internal 500-kΩ pullup and 320-kΩ pulldown (see Table 8-3). |
| 11 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 12 | OUT0_P | output | Differential LVDS output pair number 0, positive side. |
| 13 | OUT0_N | output | Differential LVDS output pair number 0, negative side. |
| 14 | OUT1_P | output | Differential LVDS output pair number 1, positive side. |
| 15 | OUT1_N | output | Differential LVDS output pair number 1, negative side. |
| 16 | OUT2_P | output | Differential LVDS output pair number 2, positive side. |
| 17 | OUT2_N | output | Differential LVDS output pair number 2, negative side. |
| 18 | OUT3_P | output | Differential LVDS output pair number 3, positive side. |
| 19 | OUT3_N | output | Differential LVDS output pair number 3, negative side. |
| 20 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 21 | GND | power_in | Ground. |
| 22 | OUT4_P | output | Differential LVDS output pair number 4, positive side. |
| 23 | OUT4_N | output | Differential LVDS output pair number 4, negative side. |
| 24 | OUT5_P | output | Differential LVDS output pair number 5, positive side. |
| 25 | OUT5_N | output | Differential LVDS output pair number 5, negative side. |
| 26 | OUT6_P | output | Differential LVDS output pair number 6, positive side. |
| 27 | OUT6_N | output | Differential LVDS output pair number 6, negative side. |
| 28 | OUT7_P | output | Differential LVDS output pair number 7, positive side. |
| 29 | OUT7_N | output | Differential LVDS output pair number 7, negative side. |
| 30 | GND | power_in | Ground. |
| 31 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 32 | OUT8_P | output | Differential LVDS output pair number 8, positive side. |
| 33 | OUT8_N | output | Differential LVDS output pair number 8, negative side. |
| 34 | OUT9_P | output | Differential LVDS output pair number 9, positive side. |
| 35 | OUT9_N | output | Differential LVDS output pair number 9, negative side. |
| 36 | OUT10_P | output | Differential LVDS output pair number 10, positive side. |
| 37 | OUT10_N | output | Differential LVDS output pair number 10, negative side. |
| 38 | OUT11_P | output | Differential LVDS output pair number 11, positive side. |
| 39 | OUT11_N | output | Differential LVDS output pair number 11, negative side. |
| 40 | VDD | power_in | Device power supply (1.8 V, 2.5 V, or 3.3 V). |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40(6x6) |
| Category | RTC/Clock Chip |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 3.6 | V | 5 | ||
| Input voltage | VIN | -0.3 | 3.6 | V | 5 | ||
| Output voltage (min) | VO | -0.3 | V | max is VDD + 0.3 | 5 | ||
| Input current | IIN | -20 | 20 | mA | 5 | ||
| Continuous output current | IO | -50 | 50 | mA | 5 | ||
| Junction temperature | TJ | 135 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | Device unpowered | 5 | |
| Core supply voltage 3.3-V | VDD | 3.135 | 3.3 | 3.465 | V | 3.3-V supply | 5 |
| Core supply voltage 2.5-V | VDD | 2.375 | 2.5 | 2.625 | V | 2.5-V supply | 5 |
| Core supply voltage 1.8-V | VDD | 1.71 | 1.8 | 1.89 | V | 1.8-V supply | 5 |
| Supply voltage ramp | 0.1 | 20 | ms | Requires monotonic ramp (10-90 % of VDD) | 5 | ||
| Operating free-air temperature | TA | -40 | 105 | °C | 5 | ||
| Operating junction temperature | TJ | -40 | 135 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 30.3 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 21.6 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 13.1 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 0.4 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Junction-to-board characterization parameter | ΨJB | 13 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 4.5 | °C/W | RHA (VQFN) 40 pins | 6 | ||
| Core supply current | IDD100M | 105 | 130 | mA | All outputs enabled, RL = 100 Ω, f =100 MHz (LMK1D1212) | 6 | |
| Input high current (control) | IIH | 30 | uA | VDD can be 1.8V, 2.5V, or 3.3V with VIH = VDD | 6 | ||
| Input low current (control) | IIL | -30 | uA | VDD can be 1.8V, 2.5V, or 3.3V with VIH = VDD | 6 | ||
| Input frequency (single-ended) | fIN | 250 | MHz | Clock input, DC to 250 MHz | 6 | ||
| Single-ended input voltage swing | VIN_S-E | 0.4 | 3.465 | V | Assumes a square wave input with two levels | 6 | |
| Input slew rate | dVIN/dt | 0.05 | V/ns | 20% to 80% of the amplitude | 6 | ||
| Input high current (single-ended) | IIH | 60 | uA | VDD = 3.465 V, VIH = 3.465 V | 6 | ||
| Input low current (single-ended) | IIL | -30 | uA | VDD = 3.465 V, VIL = 0 V | 6 | ||
| Input frequency (differential) | fIN | 2 | GHz | Clock input | 6 | ||
| Differential input voltage peak-to-peak | VIN,DIFF(p-p) | 0.3 | 2.4 | VPP | VICM = 1 V (VDD = 1.8 V) | 6 | |
| Input common-mode voltage | VICM | 0.25 | 2.3 | V | VIN,DIFF(P-P) > 0.4 V (VDD = 1.8 V/2.5 V/3.3 V) | 7 | |
| Input high current (differential) | IIH | 30 | uA | VDD = 3.465 V, VINP = 2.4 V, VINN = 1.2 V | 7 | ||
| Input low current (differential) | IIL | -30 | uA | VDD = 3.465 V, VINP = 0 V, VINN = 1.2 V | 7 | ||
| Differential output voltage magnitude | /VOD/ | 250 | 350 | 450 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω | 7 |
| Differential output voltage magnitude | /VOD/ | 400 | 500 | 650 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω, AMP_SEL = 1 | 7 |
| Change in differential output voltage magnitude | ΔVOD | -15 | 15 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω | 7 | |
| Change in differential output voltage magnitude | ΔVOD | -20 | 20 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω, AMP_SEL = 1 | 7 | |
| Steady-state common-mode output voltage | VOC(SS) | 1 | 1.2 | V | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω (VDD = 1.8 V) | 7 | |
| Steady-state common-mode output voltage | VOC(SS) | 1.1 | 1.375 | V | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω (VDD = 2.5 V/3.3 V) | 7 | |
| Steady-state common-mode output voltage | VOC(SS) | 0.8 | 1.05 | V | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω (VDD = 1.8 V), AMP_SEL = 1 | 7 | |
| Steady-state common-mode output voltage | VOC(SS) | 0.9 | 1.15 | V | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω (VDD = 2.5 V/3.3 V), AMP_SEL = 1 | 7 | |
| Change in steady-state common-mode output voltage | ΔVOC(SS) | -15 | 15 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω | 7 | |
| Change in steady-state common-mode output voltage | ΔVOC(SS) | -20 | 20 | mV | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω, AMP_SEL = 1 | 7 | |
| Output overshoot and undershoot | Vring | -0.1 | 0.1 | VOD | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω, fOUT = 491.52 MHz | 7 | |
| Output AC common-mode voltage | VOS | 50 | 100 | mVpp | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω | 7 | |
| Output AC common-mode voltage | VOS | 75 | 150 | mVpp | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω, AMP_SEL = 1 | 7 | |
| Short-circuit output current (differential) | IOS | -12 | 12 | mA | VOUTP = VOUTN | 7 | |
| Short-circuit output current (common-mode) | IOS(cm) | -24 | 24 | mA | VOUTP = VOUTN = 0 | 7 | |
| Propagation delay | tPD | 0.3 | 0.575 | ns | VIN,DIFF(P-P) = 0.3 V, RLOAD = 100 Ω | 7 | |
| Output skew | tSK, O | 20 | ps | Skew between outputs with the same load conditions (12 and 16 channels) | 7 | ||
| Part-to-part skew | tSK, PP | 200 | ps | Skew between outputs on different parts, same operating conditions, same input and output loading | 7 | ||
| Pulse skew | tSK, P | -20 | 20 | ps | 50% duty cycle input, crossing point-to-crossing point distortion | 7 | |
| Random additive jitter (rms) | tRJIT(ADD) | 45 | 60 | fs, RMS | fIN = 156.25 MHz with 50% duty-cycle, Input slew rate = 1.5V/ns, Integration range = 12 kHz to 20 MHz, RLOAD = 100 Ω | 8 | |
| Output duty cycle | ODC | 45 | 55 | % | With 50% duty cycle input | 8 | |
| Output rise and fall time | tR/tF | 300 | ps | 20% to 80% with RLOAD = 100 Ω | 8 | ||
| Reference output voltage | VAC_REF | 0.9 | 1.25 | 1.375 | V | VDD = 2.5 V, ILOAD = 100 μA | 8 |
| Core supply current, static | IDDSTAT | 65 | mA | All outputs enabled and unterminated, f = 0 Hz (LMK1D1212) | 6 | ||
| Input pullup resistor | Rpull-up | 500 | kΩ | 6 | |||
| Input pulldown resistor | Rpull-down | 320 | kΩ | 6 | |||
| Input capacitance (single-ended input) | CIN_SE | 3.5 | pF | at 25°C | 6 | ||
| Input capacitance (differential input, single-ended) | CIN_SE | 3.5 | pF | at 25°C | 7 | ||
| Phase noise 1 kHz | PN1kHz | -143 | dBc/Hz | 156.25 MHz carrier, 50% duty-cycle, input slew rate = 1.5V/ns, RLOAD = 100 Ω | 8 | ||
| Phase noise 10 kHz | PN10kHz | -150 | dBc/Hz | 156.25 MHz carrier, 50% duty-cycle, input slew rate = 1.5V/ns, RLOAD = 100 Ω | 8 | ||
| Phase noise 100 kHz | PN100kHz | -157 | dBc/Hz | 156.25 MHz carrier, 50% duty-cycle, input slew rate = 1.5V/ns, RLOAD = 100 Ω | 8 | ||
| Phase noise 1 MHz | PN1MHz | -160 | dBc/Hz | 156.25 MHz carrier, 50% duty-cycle, input slew rate = 1.5V/ns, RLOAD = 100 Ω | 8 | ||
| Phase noise floor | PNfloor | -164 | dBc/Hz | 156.25 MHz carrier, 50% duty-cycle, input slew rate = 1.5V/ns, RLOAD = 100 Ω | 8 | ||
| Mux isolation | MUXISO | 80 | dB | fIN = 156.25 MHz | 8 | ||
| Power supply noise rejection 10 kHz | PSNR | -70 | dBc | 10 kHz, 100 mVpp ripple injected on VDD, VDD = 2.5 V/3.3 V | 8 | ||
| Power supply noise rejection 1 MHz | PSNR | -50 | dBc | 1 MHz, 100 mVpp ripple injected on VDD, VDD = 2.5 V/3.3 V | 8 |
CAD (KiCad official)
- Symbol:
LMK1D1212RHAR - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: VQFN-40(6x6) (KiCad packages3D, STEP)
- 3D model files:
lmk1d1212rhar-etched.step/lmk1d1212rhar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk1d1212rhar.step/lmk1d1212rhar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
b84db112f916687d, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).