main
Ray
lmk1c1106pwr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
6a7c508
LMK1C1106PWR
Texas Instruments · Clock Buffers, Drivers, Distributors · TSSOP-14
LMK1C1106PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKIN | input | Single-ended LVCMOS clock input. Contains an internal 300-kΩ (typical) pulldown resistor to GND. Accepts DC to 250 MHz at VDD = 3.3 V (200 MHz at 2.5 V / 1.8 V). VIH = 0.7 × VDD, VIL = 0.3 × VDD. |
| 2 | 1G | input | Global output enable input with internal 300-kΩ (typical) pulldown resistor to GND. HIGH enables all Yn outputs; LOW forces outputs to a low state. Typically pulled up to VDD with an external resistor. |
| 3 | Y0 | output | LVCMOS clock output 0. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω; VOH ≥ 2.8 V at IOH = 1 mA (VDD = 3.3 V). |
| 4 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 5 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 6 | Y4 | output | LVCMOS clock output 4. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 7 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 8 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 9 | Y5 | output | LVCMOS clock output 5. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 10 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 11 | Y2 | output | LVCMOS clock output 2. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 12 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 13 | Y3 | output | LVCMOS clock output 3. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 14 | Y1 | output | LVCMOS clock output 1. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Clock/Timing |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
LMK1C1106PWR
CAD (KiCad official)
- Symbol:
LMK1C1106PWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lmk1c1106pwr-etched.step/lmk1c1106pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk1c1106pwr.step/lmk1c1106pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
9cb5952511434900, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMK1C1106PWR
**Texas Instruments** · Clock Buffers, Drivers, Distributors · TSSOP-14
LMK1C1106PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKIN | input | Single-ended LVCMOS clock input. Contains an internal 300-kΩ (typical) pulldown resistor to GND. Accepts DC to 250 MHz at VDD = 3.3 V (200 MHz at 2.5 V / 1.8 V). VIH = 0.7 × VDD, VIL = 0.3 × VDD. |
| 2 | 1G | input | Global output enable input with internal 300-kΩ (typical) pulldown resistor to GND. HIGH enables all Yn outputs; LOW forces outputs to a low state. Typically pulled up to VDD with an external resistor. |
| 3 | Y0 | output | LVCMOS clock output 0. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω; VOH ≥ 2.8 V at IOH = 1 mA (VDD = 3.3 V). |
| 4 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 5 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 6 | Y4 | output | LVCMOS clock output 4. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 7 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 8 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 9 | Y5 | output | LVCMOS clock output 5. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 10 | GND | power_in | Device ground reference. Tie to system ground plane. |
| 11 | Y2 | output | LVCMOS clock output 2. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 12 | VDD | power_in | Core supply pin. Accepts 3.3 V, 2.5 V, or 1.8 V (typical, ±5%). Bypass with an external 0.1-µF capacitor placed near the pin. |
| 13 | Y3 | output | LVCMOS clock output 3. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
| 14 | Y1 | output | LVCMOS clock output 1. Typically connected to a receiver; unused outputs can be left floating. Output impedance ≈ 50 Ω. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Clock/Timing |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `LMK1C1106PWR`
## CAD (KiCad official)
- Symbol: `LMK1C1106PWR`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `lmk1c1106pwr-etched.step` / `lmk1c1106pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk1c1106pwr.step` / `lmk1c1106pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmk1c1106.pdf) (27 pp, sha256 `9cb5952511434900`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmk1c1106pwr-datasheet.pdf)