main
Ray
Publish 0.1.0
74480d1
LMK04826BISQ
Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · WQFN-64-EP(9x9)
LMK04826BISQ from Texas Instruments, in a WQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DCLKout0 | output | Device clock output 0, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 2 | DCLKout0* | output | Complementary pin of device clock output 0, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 3 | SDCLKout1 | output | SYSREF / device clock output 1, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 4 | SDCLKout1* | output | Complementary pin of SYSREF / device clock output 1, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 5 | RESET/GPO | bidirectional | Device reset input or GPO; as reset input polarity and nominal 160-kΩ pull-up or pull-down are register controlled, as output it can be push-pull or open-drain. |
| 6 | SYNC/SYSREF_REQ | input | Synchronization input used to reset dividers, trigger the SYSREF pulser, or request continuous SYSREF; polarity is register controlled with nominal 160-kΩ pulldown. |
| 7 | NC | unconnected | Do not connect; this pin must be left floating. |
| 8 | NC | unconnected | Do not connect; this pin must be left floating. |
| 9 | NC | unconnected | Do not connect; this pin must be left floating. |
| 10 | Vcc1_VCO | power_in | Power supply for VCO LDO; decoupling requirements may change with system frequency. |
| 11 | LDObyp1 | passive | LDO bypass pin that must be bypassed to ground with a 10-µF capacitor placed close to the pin. |
| 12 | LDObyp2 | passive | LDO bypass pin that must be bypassed to ground with a 0.1-µF capacitor placed close to the pin. |
| 13 | SDCLKout3 | output | SYSREF / device clock output 3, differential, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 14 | SDCLKout3* | output | Complementary pin of SYSREF / device clock output 3, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 15 | DCLKout2 | output | Device clock output 2, differential, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 16 | DCLKout2* | output | Complementary pin of device clock output 2, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 17 | Vcc2_CG1 | power_in | Power supply for clock outputs 2 and 3; decoupling requirements may change with system frequency. |
| 18 | CS* | input | SPI chip select, active-low input; must be pulled up externally or actively driven high when not in use. |
| 19 | SCK | input | SPI clock, active-high input with nominal 160-kΩ pulldown. |
| 20 | SDIO | bidirectional | SPI data pin for bidirectional I/O; output can be open-drain (requires external pull-up) or push-pull, or disabled by register settings. |
| 21 | Vcc3_SYSREF | power_in | Power supply for SYSREF divider and SYNC; decoupling requirements may change with system frequency. |
| 22 | SDCLKout5 | output | SYSREF / device clock output 5, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 23 | SDCLKout5* | output | Complementary pin of SYSREF / device clock output 5, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 24 | DCLKout4 | output | Device clock output 4, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 25 | DCLKout4* | output | Complementary pin of device clock output 4, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 26 | Vcc4_CG2 | power_in | Power supply for clock outputs 4, 5, 6, and 7; decoupling requirements may change with system frequency. |
| 27 | DCLKout6 | output | Device clock output 6, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 28 | DCLKout6* | output | Complementary pin of device clock output 6, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 29 | SDCLKout7 | output | SYSREF / device clock output 7, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 30 | SDCLKout7* | output | Complementary pin of SYSREF / device clock output 7, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 31 | Status_LD1 | bidirectional | Programmable status pin, by default an active-high output showing PLL1 lock detect; configurable as open-drain or push-pull output. |
| 32 | CPout1 | output | Charge pump 1 output connected to the PLL1 external loop filter components and the VCXO control voltage pin. |
| 33 | Vcc5_DIG | power_in | Power supply for digital circuitry such as SPI bus and GPIO pins; decoupling requirements may change with system frequency. |
| 34 | CLKin1/Fin/FBCLKin | input | Reference clock input port 1 for PLL1 (default), or external VCO / distribution input (Fin), or zero-delay feedback input (FBCLKin); DC or AC coupled, single-ended or differential, leave floating if unused. |
| 35 | CLKin1*/Fin*/FBCLKin* | input | Complementary pin of reference clock input port 1 (default), Fin, or FBCLKin; if unused single-ended connect to GND with 0.1-µF capacitor, leave floating if both pins unused. |
| 36 | Vcc6_PLL1 | power_in | Power supply for PLL1, charge pump 1, and holdover DAC; decoupling requirements may change with system frequency. |
| 37 | CLKin0 | input | Reference clock input port 0 for PLL1, also usable as SYNC/SYSREF synchronization input; DC or AC coupled, single-ended or differential, leave floating if unused. |
| 38 | CLKin0* | input | Complementary pin of reference clock input port 0; if unused single-ended connect to GND with 0.1-µF capacitor, leave floating if both pins unused. |
| 39 | Vcc7_OSCout | power_in | Power supply for OSCout port and CLKin2; decoupling requirements may change with system frequency. |
| 40 | OSCout/CLKin2 | bidirectional | Buffered output of OSCin (default, LVPECL supporting only 240-Ω emitter resistors) or reference clock input port 2 for PLL1 when registers set it as input. |
| 41 | OSCout*/CLKin2* | bidirectional | Complementary pin of OSCout (default LVPECL, only 240-Ω emitter resistors) or CLKin2 reference input for PLL1 when registers set it as input. |
| 42 | Vcc8_OSCin | power_in | Power supply for OSCin; decoupling requirements may change with system frequency. |
| 43 | OSCin | input | Feedback to PLL1 and reference input to PLL2; inputs must be AC-coupled, single-ended or differential. |
| 44 | OSCin* | input | Complementary pin of OSCin; must be AC-coupled, connect to GND with 0.1-µF capacitor if unused single-ended, leave floating if both pins unused. |
| 45 | Vcc9_CP2 | power_in | Power supply for PLL2 charge pump; decoupling requirements may change with system frequency. |
| 46 | CPout2 | output | Charge pump 2 output connected to PLL2 loop filter components (and external VCO control voltage if used); do not route near noisy signals. |
| 47 | Vcc10_PLL2 | power_in | Power supply for PLL2; decoupling requirements may change with system frequency. |
| 48 | Status_LD2 | bidirectional | Programmable status pin, by default an active-high output showing PLL2 lock detect; configurable as open-drain or push-pull output. |
| 49 | SDCLKout9 | output | SYSREF / device clock 9, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 50 | SDCLKout9* | output | Complementary pin of SYSREF / device clock 9, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 51 | DCLKout8 | output | Device clock output 8, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 52 | DCLKout8* | output | Complementary pin of device clock output 8, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 53 | Vcc11_CG3 | power_in | Power supply for clock outputs 8, 9, 10, and 11; decoupling requirements may change with system frequency. |
| 54 | DCLKout10 | output | Device clock output 10, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 55 | DCLKout10* | output | Complementary pin of device clock output 10, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 56 | SDCLKout11 | output | SYSREF / device clock output 11, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 57 | SDCLKout11* | output | Complementary pin of SYSREF / device clock output 11, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 58 | CLKin_SEL0 | bidirectional | Programmable status pin, by default an active-high input with nominal 160-kΩ pulldown selecting the PLL1 reference CLKin in pin-select mode; can be set as push-pull or open-drain output. |
| 59 | CLKin_SEL1 | bidirectional | Programmable status pin, by default an active-high input with nominal 160-kΩ pulldown selecting the PLL1 reference CLKin in pin-select mode; can be set as push-pull or open-drain output. |
| 60 | SDCLKout13 | output | SYSREF / device clock output 13, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 61 | SDCLKout13* | output | Complementary pin of SYSREF / device clock output 13, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 62 | DCLKout12 | output | Device clock output 12, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 63 | DCLKout12* | output | Complementary pin of device clock output 12, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 64 | Vcc12_CG0 | power_in | Power supply for clock outputs 0, 1, 12, and 13; decoupling requirements may change with system frequency. |
| 65 | DAP | power_in | Die attach pad (ground); connect directly to the GND plane through multiple vias for thermal performance, all supply pins are referred to DAP ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-64-EP(9x9) |
| Category | RTC/Clock Chip |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 3.6 | V | Never to exceed 3.6 V | 11 | |
| Input voltage | VIN | -0.3 | V | max VCC + 0.3 V | 11 | ||
| Lead temperature | TL | 260 | °C | solder 4 seconds | 11 | ||
| Junction temperature | TJ | 150 | °C | 11 | |||
| Differential input current | IIN | -5 | 5 | mA | CLKinX/X*, OSCin/OSCin*, FBCLKin/FBCLKin*, Fin/Fin* | 11 | |
| Storage temperature | Tstg | -65 | 150 | °C | 11 | ||
| Supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | 11 | |
| Ambient temperature | TA | -40 | 25 | 85 | °C | 11 | |
| Junction temperature | TJ | 125 | °C | 11 | |||
| PCB temperature | TPCB | 105 | °C | measured at thermal pad | 11 | ||
| Junction-to-ambient thermal resistance | RθJA | 24.3 | °C/W | NKD (WQFN) 64 pins | 11 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 6.1 | °C/W | 11 | |||
| Junction-to-board thermal resistance | RθJB | 3.5 | °C/W | 11 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.7 | °C/W | 12 | |||
| Power down supply current | ICC_PD | 1 | 3 | mA | 12 | ||
| Supply current | ICC_CLKS | 565 | 665 | mA | 14 HSDS 8-mA clocks enabled, PLL1 and PLL2 locked | 12 | |
| Clock input frequency | fCLKin | 0.001 | 750 | MHz | 12 | ||
| Clock input differential voltage | VIDCLKin | 0.125 | 1.55 | /V/ | AC coupled | 12 | |
| Clock input differential swing | VSSCLKin | 0.25 | 3.1 | Vpp | AC coupled | 12 | |
| Clock input single-ended voltage | VCLKin | 0.25 | 2.4 | Vpp | CLKinX_TYPE = 0 (bipolar) | 12 | |
| Clock input single-ended voltage | VCLKin | 0.35 | 2.4 | Vpp | CLKinX_TYPE = 1 (MOS) | 12 | |
| High input voltage | VCLKin-VIH | 2 | V | DC coupled to CLKinX; CLKinX_TYPE = 1 (MOS); max VCC | 12 | ||
| Low input voltage | VCLKin-VIL | 0 | 0.4 | V | CLKinX_TYPE = 1 (MOS) | 12 | |
| FBCLKin clock input frequency | fFBCLKin | 0.001 | 750 | MHz | AC coupled, CLKinX_TYPE = 0 | 12 | |
| Fin clock input frequency | fFin | 0.001 | 3100 | MHz | AC coupled, CLKinX_TYPE = 0 | 12 | |
| FBCLKin/Fin single-ended voltage | VFBCLKin/Fin | 0.25 | 2 | Vpp | AC coupled, CLKinX_TYPE = 0 (bipolar) | 13 | |
| PLL1 phase detector frequency | fPD1 | 40 | MHz | 13 | |||
| PLL1 charge pump sink/source mismatch | ICPout1%MIS | 1 | 10 | % | VCPout1 = VCC/2, T = 25 °C | 13 | |
| PLL1 charge pump current vs voltage variation | ICPout1VTUNE | 4 | % | 0.5 V < VCPout1 < VCC - 0.5 V, TA = 25 °C | 13 | ||
| PLL1 charge pump current vs temperature variation | ICPout1%TEMP | 4 | % | 13 | |||
| PLL1 charge pump TRI-STATE leakage current | ICPout1 TRI | 5 | nA | 0.5 V < VCPout < VCC - 0.5 V | 13 | ||
| PLL2 reference input frequency | fOSCin | 500 | MHz | 13 | |||
| OSCin single-ended input voltage | VOSCin | 0.2 | 2.4 | Vpp | AC coupled; single-ended | 13 | |
| OSCin differential voltage swing | VIDOSCin | 0.2 | 1.55 | /V/ | AC coupled | 13 | |
| OSCin differential swing | VSSOSCin | 0.4 | 3.1 | Vpp | AC coupled | 13 | |
| Doubler input frequency | fdoubler_max | 155 | MHz | EN_PLL2_REF_2X = 1; OSCin duty cycle 40% to 60% | 13 | ||
| Crystal frequency range | FXTAL | 10 | 40 | MHz | Fundamental mode crystal | 14 | |
| OSCin port input capacitance | CIN | 1 | pF | -40 to 85 °C | 14 | ||
| PLL2 phase detector frequency | fPD2 | 155 | MHz | 14 | |||
| PLL2 charge pump sink/source mismatch | ICPout2%MIS | 1 | 10 | % | VCPout2=VCC/2, TA = 25 °C | 14 | |
| PLL2 charge pump current vs voltage variation | ICPout2VTUNE | 4 | % | 0.5 V < VCPout2 < VCC - 0.5 V, TA = 25 °C | 14 | ||
| PLL2 charge pump current vs temperature variation | ICPout2%TEMP | 4 | % | 14 | |||
| PLL2 charge pump leakage | ICPout2TRI | 10 | nA | 0.5 V < VCPout2 < VCC - 0.5 V | 14 | ||
| LMK04826 VCO0 tuning range | fVCO | 1840 | 1970 | MHz | LMK04826 VCO0 | 15 | |
| LMK04826 VCO1 tuning range | fVCO | 2440 | 2505 | MHz | LMK04826 VCO1 | 15 | |
| Allowable temperature drift for continuous lock | /ΔTCL/ | 125 | °C | After programming for lock, no changes to output configuration are permitted | 15 | ||
| Default output clock frequency at power on | fCLKout-startup | 235 | MHz | LMK04826 | 21 | ||
| OSCout frequency | fOSCout | 500 | MHz | 21 | |||
| Skew DCLKoutX to SDCLKoutY | /TSKEW/ | 25 | /ps/ | FCLK = 245.76 MHz, RL= 100 Ω, same pair, same format, SDCLKoutY_MUX = 0 | 21 | ||
| Skew any pair | /TSKEW/ | 50 | /ps/ | FCLK = 245.76 MHz, RL= 100 Ω, any pair, same format, SDCLKoutY_MUX = 0 | 21 | ||
| Maximum analog delay frequency | fADLYmax | 1536 | MHz | DCLKoutX_MUX = 4 | 21 | ||
| LVDS output offset voltage | VOS | 1.125 | 1.25 | 1.375 | V | LVDS | 21 |
| LVDS change in VOD | ΔVOD | -60 | 60 | mV | complementary output states | 21 | |
| LVDS short circuit current single ended | ISA, ISB | -24 | 24 | mA | shorted to GND, T = 25 °C | 21 | |
| LVDS short circuit current differential | ISAB | -12 | 12 | mA | Complimentary outputs tied together | 21 | |
| Digital input high voltage | VIH | 1.2 | V | max VCC | 23 | ||
| Digital input low voltage | VIL | 0.4 | V | 23 | |||
| Digital output low voltage | VOL | 0.4 | V | IOL = 500 µA | 23 | ||
| SPI SCLK period | tSCLK | 50 | ns | See Figure 1 | 25 | ||
| RESET pin high time | tHIGH | 25 | ns | RESET pin held high for device reset | 24 |
CAD (KiCad official)
- Symbol:
LMK04826BISQ - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: WQFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
lmk04826bisq-etched.step/lmk04826bisq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk04826bisq.step/lmk04826bisq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (127 pp, sha256
9046ccbdd7bdb5bf, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMK04826BISQ
**Texas Instruments** · Clock Generators / Frequency Synthesizers / PLL · WQFN-64-EP(9x9)
LMK04826BISQ from Texas Instruments, in a WQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DCLKout0 | output | Device clock output 0, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 2 | DCLKout0* | output | Complementary pin of device clock output 0, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 3 | SDCLKout1 | output | SYSREF / device clock output 1, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 4 | SDCLKout1* | output | Complementary pin of SYSREF / device clock output 1, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 5 | RESET/GPO | bidirectional | Device reset input or GPO; as reset input polarity and nominal 160-kΩ pull-up or pull-down are register controlled, as output it can be push-pull or open-drain. |
| 6 | SYNC/SYSREF_REQ | input | Synchronization input used to reset dividers, trigger the SYSREF pulser, or request continuous SYSREF; polarity is register controlled with nominal 160-kΩ pulldown. |
| 7 | NC | unconnected | Do not connect; this pin must be left floating. |
| 8 | NC | unconnected | Do not connect; this pin must be left floating. |
| 9 | NC | unconnected | Do not connect; this pin must be left floating. |
| 10 | Vcc1_VCO | power_in | Power supply for VCO LDO; decoupling requirements may change with system frequency. |
| 11 | LDObyp1 | passive | LDO bypass pin that must be bypassed to ground with a 10-µF capacitor placed close to the pin. |
| 12 | LDObyp2 | passive | LDO bypass pin that must be bypassed to ground with a 0.1-µF capacitor placed close to the pin. |
| 13 | SDCLKout3 | output | SYSREF / device clock output 3, differential, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 14 | SDCLKout3* | output | Complementary pin of SYSREF / device clock output 3, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 15 | DCLKout2 | output | Device clock output 2, differential, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 16 | DCLKout2* | output | Complementary pin of device clock output 2, part of clock group 1; if unused set output format buffer to powerdown and leave floating. |
| 17 | Vcc2_CG1 | power_in | Power supply for clock outputs 2 and 3; decoupling requirements may change with system frequency. |
| 18 | CS* | input | SPI chip select, active-low input; must be pulled up externally or actively driven high when not in use. |
| 19 | SCK | input | SPI clock, active-high input with nominal 160-kΩ pulldown. |
| 20 | SDIO | bidirectional | SPI data pin for bidirectional I/O; output can be open-drain (requires external pull-up) or push-pull, or disabled by register settings. |
| 21 | Vcc3_SYSREF | power_in | Power supply for SYSREF divider and SYNC; decoupling requirements may change with system frequency. |
| 22 | SDCLKout5 | output | SYSREF / device clock output 5, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 23 | SDCLKout5* | output | Complementary pin of SYSREF / device clock output 5, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 24 | DCLKout4 | output | Device clock output 4, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 25 | DCLKout4* | output | Complementary pin of device clock output 4, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 26 | Vcc4_CG2 | power_in | Power supply for clock outputs 4, 5, 6, and 7; decoupling requirements may change with system frequency. |
| 27 | DCLKout6 | output | Device clock output 6, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 28 | DCLKout6* | output | Complementary pin of device clock output 6, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 29 | SDCLKout7 | output | SYSREF / device clock output 7, differential, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 30 | SDCLKout7* | output | Complementary pin of SYSREF / device clock output 7, part of clock group 2; if unused set output format buffer to powerdown and leave floating. |
| 31 | Status_LD1 | bidirectional | Programmable status pin, by default an active-high output showing PLL1 lock detect; configurable as open-drain or push-pull output. |
| 32 | CPout1 | output | Charge pump 1 output connected to the PLL1 external loop filter components and the VCXO control voltage pin. |
| 33 | Vcc5_DIG | power_in | Power supply for digital circuitry such as SPI bus and GPIO pins; decoupling requirements may change with system frequency. |
| 34 | CLKin1/Fin/FBCLKin | input | Reference clock input port 1 for PLL1 (default), or external VCO / distribution input (Fin), or zero-delay feedback input (FBCLKin); DC or AC coupled, single-ended or differential, leave floating if unused. |
| 35 | CLKin1*/Fin*/FBCLKin* | input | Complementary pin of reference clock input port 1 (default), Fin, or FBCLKin; if unused single-ended connect to GND with 0.1-µF capacitor, leave floating if both pins unused. |
| 36 | Vcc6_PLL1 | power_in | Power supply for PLL1, charge pump 1, and holdover DAC; decoupling requirements may change with system frequency. |
| 37 | CLKin0 | input | Reference clock input port 0 for PLL1, also usable as SYNC/SYSREF synchronization input; DC or AC coupled, single-ended or differential, leave floating if unused. |
| 38 | CLKin0* | input | Complementary pin of reference clock input port 0; if unused single-ended connect to GND with 0.1-µF capacitor, leave floating if both pins unused. |
| 39 | Vcc7_OSCout | power_in | Power supply for OSCout port and CLKin2; decoupling requirements may change with system frequency. |
| 40 | OSCout/CLKin2 | bidirectional | Buffered output of OSCin (default, LVPECL supporting only 240-Ω emitter resistors) or reference clock input port 2 for PLL1 when registers set it as input. |
| 41 | OSCout*/CLKin2* | bidirectional | Complementary pin of OSCout (default LVPECL, only 240-Ω emitter resistors) or CLKin2 reference input for PLL1 when registers set it as input. |
| 42 | Vcc8_OSCin | power_in | Power supply for OSCin; decoupling requirements may change with system frequency. |
| 43 | OSCin | input | Feedback to PLL1 and reference input to PLL2; inputs must be AC-coupled, single-ended or differential. |
| 44 | OSCin* | input | Complementary pin of OSCin; must be AC-coupled, connect to GND with 0.1-µF capacitor if unused single-ended, leave floating if both pins unused. |
| 45 | Vcc9_CP2 | power_in | Power supply for PLL2 charge pump; decoupling requirements may change with system frequency. |
| 46 | CPout2 | output | Charge pump 2 output connected to PLL2 loop filter components (and external VCO control voltage if used); do not route near noisy signals. |
| 47 | Vcc10_PLL2 | power_in | Power supply for PLL2; decoupling requirements may change with system frequency. |
| 48 | Status_LD2 | bidirectional | Programmable status pin, by default an active-high output showing PLL2 lock detect; configurable as open-drain or push-pull output. |
| 49 | SDCLKout9 | output | SYSREF / device clock 9, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 50 | SDCLKout9* | output | Complementary pin of SYSREF / device clock 9, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 51 | DCLKout8 | output | Device clock output 8, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 52 | DCLKout8* | output | Complementary pin of device clock output 8, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 53 | Vcc11_CG3 | power_in | Power supply for clock outputs 8, 9, 10, and 11; decoupling requirements may change with system frequency. |
| 54 | DCLKout10 | output | Device clock output 10, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 55 | DCLKout10* | output | Complementary pin of device clock output 10, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 56 | SDCLKout11 | output | SYSREF / device clock output 11, differential, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 57 | SDCLKout11* | output | Complementary pin of SYSREF / device clock output 11, part of clock group 3; if unused set output format buffer to powerdown and leave floating. |
| 58 | CLKin_SEL0 | bidirectional | Programmable status pin, by default an active-high input with nominal 160-kΩ pulldown selecting the PLL1 reference CLKin in pin-select mode; can be set as push-pull or open-drain output. |
| 59 | CLKin_SEL1 | bidirectional | Programmable status pin, by default an active-high input with nominal 160-kΩ pulldown selecting the PLL1 reference CLKin in pin-select mode; can be set as push-pull or open-drain output. |
| 60 | SDCLKout13 | output | SYSREF / device clock output 13, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 61 | SDCLKout13* | output | Complementary pin of SYSREF / device clock output 13, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 62 | DCLKout12 | output | Device clock output 12, differential, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 63 | DCLKout12* | output | Complementary pin of device clock output 12, part of clock group 0; if unused set output format buffer to powerdown and leave floating. |
| 64 | Vcc12_CG0 | power_in | Power supply for clock outputs 0, 1, 12, and 13; decoupling requirements may change with system frequency. |
| 65 | DAP | power_in | Die attach pad (ground); connect directly to the GND plane through multiple vias for thermal performance, all supply pins are referred to DAP ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-64-EP(9x9) |
| Category | RTC/Clock Chip |
| Pins | 65 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 3.6 | V | Never to exceed 3.6 V | 11 |
| Input voltage | VIN | -0.3 | | | V | max VCC + 0.3 V | 11 |
| Lead temperature | TL | | | 260 | °C | solder 4 seconds | 11 |
| Junction temperature | TJ | | | 150 | °C | | 11 |
| Differential input current | IIN | -5 | | 5 | mA | CLKinX/X*, OSCin/OSCin*, FBCLKin/FBCLKin*, Fin/Fin* | 11 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 11 |
| Supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | | 11 |
| Ambient temperature | TA | -40 | 25 | 85 | °C | | 11 |
| Junction temperature | TJ | | | 125 | °C | | 11 |
| PCB temperature | TPCB | | | 105 | °C | measured at thermal pad | 11 |
| Junction-to-ambient thermal resistance | RθJA | | 24.3 | | °C/W | NKD (WQFN) 64 pins | 11 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 6.1 | | °C/W | | 11 |
| Junction-to-board thermal resistance | RθJB | | 3.5 | | °C/W | | 11 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 0.7 | | °C/W | | 12 |
| Power down supply current | ICC_PD | | 1 | 3 | mA | | 12 |
| Supply current | ICC_CLKS | | 565 | 665 | mA | 14 HSDS 8-mA clocks enabled, PLL1 and PLL2 locked | 12 |
| Clock input frequency | fCLKin | 0.001 | | 750 | MHz | | 12 |
| Clock input differential voltage | VIDCLKin | 0.125 | | 1.55 | /V/ | AC coupled | 12 |
| Clock input differential swing | VSSCLKin | 0.25 | | 3.1 | Vpp | AC coupled | 12 |
| Clock input single-ended voltage | VCLKin | 0.25 | | 2.4 | Vpp | CLKinX_TYPE = 0 (bipolar) | 12 |
| Clock input single-ended voltage | VCLKin | 0.35 | | 2.4 | Vpp | CLKinX_TYPE = 1 (MOS) | 12 |
| High input voltage | VCLKin-VIH | 2 | | | V | DC coupled to CLKinX; CLKinX_TYPE = 1 (MOS); max VCC | 12 |
| Low input voltage | VCLKin-VIL | 0 | | 0.4 | V | CLKinX_TYPE = 1 (MOS) | 12 |
| FBCLKin clock input frequency | fFBCLKin | 0.001 | | 750 | MHz | AC coupled, CLKinX_TYPE = 0 | 12 |
| Fin clock input frequency | fFin | 0.001 | | 3100 | MHz | AC coupled, CLKinX_TYPE = 0 | 12 |
| FBCLKin/Fin single-ended voltage | VFBCLKin/Fin | 0.25 | | 2 | Vpp | AC coupled, CLKinX_TYPE = 0 (bipolar) | 13 |
| PLL1 phase detector frequency | fPD1 | | | 40 | MHz | | 13 |
| PLL1 charge pump sink/source mismatch | ICPout1%MIS | | 1 | 10 | % | VCPout1 = VCC/2, T = 25 °C | 13 |
| PLL1 charge pump current vs voltage variation | ICPout1VTUNE | | | 4 | % | 0.5 V < VCPout1 < VCC - 0.5 V, TA = 25 °C | 13 |
| PLL1 charge pump current vs temperature variation | ICPout1%TEMP | | | 4 | % | | 13 |
| PLL1 charge pump TRI-STATE leakage current | ICPout1 TRI | | | 5 | nA | 0.5 V < VCPout < VCC - 0.5 V | 13 |
| PLL2 reference input frequency | fOSCin | | | 500 | MHz | | 13 |
| OSCin single-ended input voltage | VOSCin | 0.2 | | 2.4 | Vpp | AC coupled; single-ended | 13 |
| OSCin differential voltage swing | VIDOSCin | 0.2 | | 1.55 | /V/ | AC coupled | 13 |
| OSCin differential swing | VSSOSCin | 0.4 | | 3.1 | Vpp | AC coupled | 13 |
| Doubler input frequency | fdoubler_max | | | 155 | MHz | EN_PLL2_REF_2X = 1; OSCin duty cycle 40% to 60% | 13 |
| Crystal frequency range | FXTAL | 10 | | 40 | MHz | Fundamental mode crystal | 14 |
| OSCin port input capacitance | CIN | | 1 | | pF | -40 to 85 °C | 14 |
| PLL2 phase detector frequency | fPD2 | | | 155 | MHz | | 14 |
| PLL2 charge pump sink/source mismatch | ICPout2%MIS | | 1 | 10 | % | VCPout2=VCC/2, TA = 25 °C | 14 |
| PLL2 charge pump current vs voltage variation | ICPout2VTUNE | | | 4 | % | 0.5 V < VCPout2 < VCC - 0.5 V, TA = 25 °C | 14 |
| PLL2 charge pump current vs temperature variation | ICPout2%TEMP | | | 4 | % | | 14 |
| PLL2 charge pump leakage | ICPout2TRI | | | 10 | nA | 0.5 V < VCPout2 < VCC - 0.5 V | 14 |
| LMK04826 VCO0 tuning range | fVCO | 1840 | | 1970 | MHz | LMK04826 VCO0 | 15 |
| LMK04826 VCO1 tuning range | fVCO | 2440 | | 2505 | MHz | LMK04826 VCO1 | 15 |
| Allowable temperature drift for continuous lock | /ΔTCL/ | | | 125 | °C | After programming for lock, no changes to output configuration are permitted | 15 |
| Default output clock frequency at power on | fCLKout-startup | | 235 | | MHz | LMK04826 | 21 |
| OSCout frequency | fOSCout | | | 500 | MHz | | 21 |
| Skew DCLKoutX to SDCLKoutY | /TSKEW/ | | | 25 | /ps/ | FCLK = 245.76 MHz, RL= 100 Ω, same pair, same format, SDCLKoutY_MUX = 0 | 21 |
| Skew any pair | /TSKEW/ | | | 50 | /ps/ | FCLK = 245.76 MHz, RL= 100 Ω, any pair, same format, SDCLKoutY_MUX = 0 | 21 |
| Maximum analog delay frequency | fADLYmax | | | 1536 | MHz | DCLKoutX_MUX = 4 | 21 |
| LVDS output offset voltage | VOS | 1.125 | 1.25 | 1.375 | V | LVDS | 21 |
| LVDS change in VOD | ΔVOD | -60 | | 60 | mV | complementary output states | 21 |
| LVDS short circuit current single ended | ISA, ISB | -24 | | 24 | mA | shorted to GND, T = 25 °C | 21 |
| LVDS short circuit current differential | ISAB | -12 | | 12 | mA | Complimentary outputs tied together | 21 |
| Digital input high voltage | VIH | 1.2 | | | V | max VCC | 23 |
| Digital input low voltage | VIL | | | 0.4 | V | | 23 |
| Digital output low voltage | VOL | | | 0.4 | V | IOL = 500 µA | 23 |
| SPI SCLK period | tSCLK | 50 | | | ns | See Figure 1 | 25 |
| RESET pin high time | tHIGH | 25 | | | ns | RESET pin held high for device reset | 24 |
## CAD (KiCad official)
- Symbol: `LMK04826BISQ`
- Footprint: `Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm`
- 3D model: WQFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files: `lmk04826bisq-etched.step` / `lmk04826bisq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk04826bisq.step` / `lmk04826bisq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmk04826bisq.pdf) (127 pp, sha256 `9046ccbdd7bdb5bf`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmk04826bisq-datasheet.pdf)