main
History Download
Ray Publish 0.1.0 9c6f70b

LMK04816BISQX

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · WQFN-64-EP(9x9)

LMK04816BISQX from Texas Instruments, in a WQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLKout0 output Programmable clock output 0 (clock group 0), differential pair with CLKout0*.
2 CLKout0* output Complementary pin of programmable clock output 0 (clock group 0).
3 CLKout1* output Complementary pin of programmable clock output 1 (clock group 0).
4 CLKout1 output Programmable clock output 1 (clock group 0).
5 NC unconnected No connection; this pin must be left floating.
6 SYNC/Status_CLKin2 bidirectional Programmable CLKout synchronization input or programmable status pin; default is input for pin control of PLL1 reference clock selection, with CLKin2 LOS status available by programming.
7 NC unconnected No connection; this pin must be left floating.
8 NC unconnected No connection; this pin must be left floating.
9 NC unconnected No connection; this pin must be left floating.
10 Vcc1 power_in Power supply for VCO LDO; VCC range 3.15 V to 3.45 V (3.3 V nominal).
11 LDObyp1 passive LDO bypass, to be bypassed to ground with a 10-µF capacitor.
12 LDObyp2 passive LDO bypass, to be bypassed to ground with a 0.1-µF capacitor.
13 CLKout2 output Programmable clock output 2 (clock group 1), differential pair with CLKout2*.
14 CLKout2* output Complementary pin of programmable clock output 2 (clock group 1).
15 CLKout3* output Complementary pin of programmable clock output 3 (clock group 1).
16 CLKout3 output Programmable clock output 3 (clock group 1).
17 Vcc2 power_in Power supply for clock group 1 (CLKout2 and CLKout3); VCC range 3.15 V to 3.45 V.
18 Vcc3 power_in Power supply for clock group 2 (CLKout4 and CLKout5); VCC range 3.15 V to 3.45 V.
19 CLKout4 output Programmable clock output 4 (clock group 2), differential pair with CLKout4*.
20 CLKout4* output Complementary pin of programmable clock output 4 (clock group 2).
21 CLKout5* output Complementary pin of programmable clock output 5 (clock group 2).
22 CLKout5 output Programmable clock output 5 (clock group 2).
23 GND power_in Ground.
24 Vcc4 power_in Power supply for digital circuitry; VCC range 3.15 V to 3.45 V.
25 CLKin1 input Reference clock input port 1 for PLL1, AC- or DC-coupled; the same pin also serves as FBCLKin (0-delay feedback input) and Fin (external VCO input) in the respective modes.
26 CLKin1* input Complementary reference clock input port 1 for PLL1, AC- or DC-coupled; the same pin also serves as FBCLKin* and Fin* in the respective modes.
27 Status_Holdover bidirectional Programmable status pin, default readback output; programmable to indicate holdover mode.
28 CLKin0 input Reference clock input port 0 for PLL1, AC- or DC-coupled.
29 CLKin0* input Complementary reference clock input port 0 for PLL1, AC- or DC-coupled.
30 Vcc5 power_in Power supply for clock inputs; VCC range 3.15 V to 3.45 V.
31 CLKin2 input Reference clock input port 2 for PLL1, AC- or DC-coupled.
32 CLKin2* input Complementary reference clock input port 2 for PLL1, AC- or DC-coupled.
33 Status_LD bidirectional Programmable status pin, default lock detect for PLL1 and PLL2; other options available by programming.
34 CPout1 output Charge pump 1 output (PLL1).
35 Vcc6 power_in Power supply for PLL1 and charge pump 1; VCC range 3.15 V to 3.45 V.
36 OSCin input Feedback to PLL1 and reference input to PLL2, AC-coupled.
37 OSCin* input Complementary input of the OSCin port (feedback to PLL1 and reference input to PLL2), AC-coupled.
38 Vcc7 power_in Power supply for OSCin port; VCC range 3.15 V to 3.45 V.
39 OSCout0 output Programmable buffered output 0 of the OSCin port.
40 OSCout0* output Complementary programmable buffered output 0 of the OSCin port.
41 Vcc8 power_in Power supply for PLL2 and charge pump 2; VCC range 3.15 V to 3.45 V.
42 CPout2 output Charge pump 2 output (PLL2).
43 Vcc9 power_in Power supply for PLL2; VCC range 3.15 V to 3.45 V.
44 LEuWire input MICROWIRE latch enable input (CMOS).
45 CLKuWire input MICROWIRE clock input (CMOS).
46 DATAuWire input MICROWIRE data input (CMOS).
47 Vcc10 power_in Power supply for clock group 3 (CLKout6 and CLKout7); VCC range 3.15 V to 3.45 V.
48 CLKout6 output Programmable clock output 6 (clock group 3), differential pair with CLKout6*.
49 CLKout6* output Complementary pin of programmable clock output 6 (clock group 3).
50 CLKout7* output Complementary pin of programmable clock output 7 (clock group 3).
51 CLKout7 output Programmable clock output 7 (clock group 3).
52 Vcc11 power_in Power supply for clock group 4 (CLKout8 and CLKout9); VCC range 3.15 V to 3.45 V.
53 CLKout8 output Programmable clock output 8 (clock group 4), differential pair with CLKout8*.
54 CLKout8* output Complementary pin of programmable clock output 8 (clock group 4).
55 CLKout9* output Complementary pin of programmable clock output 9 (clock group 4).
56 CLKout9 output Programmable clock output 9 (clock group 4).
57 Vcc12 power_in Power supply for clock group 5 (CLKout10 and CLKout11); VCC range 3.15 V to 3.45 V.
58 CLKout10 output Programmable clock output 10 (clock group 5), differential pair with CLKout10*.
59 CLKout10* output Complementary pin of programmable clock output 10 (clock group 5).
60 CLKout11* output Complementary pin of programmable clock output 11 (clock group 5).
61 CLKout11 output Programmable clock output 11 (clock group 5).
62 Status_CLKin0 bidirectional Programmable status pin; default is input for pin control of PLL1 reference clock selection, with CLKin0 LOS status available by programming.
63 Status_CLKin1 bidirectional Programmable status pin; default is input for pin control of PLL1 reference clock selection, with CLKin1 LOS status available by programming.
64 Vcc13 power_in Power supply for clock group 0 (CLKout0 and CLKout1); VCC range 3.15 V to 3.45 V.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-64-EP(9x9)
Category RTC/Clock Chip
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.3 3.6 V Never to exceed 3.6 V 5
Input voltage VIN -0.3 V 5
Lead temperature (solder 4 seconds) TL 260 °C solder 4 seconds 5
Junction temperature TJ 150 °C 5
Differential input current IIN -5 5 mA CLKinX/X*, OSCin/OSCin*, FBCLKin/FBCLKin*, Fin/Fin* 5
Storage temperature Tstg -65 150 °C 5
Junction temperature TJ 125 °C 5
Ambient temperature TA -40 25 85 °C VCC = 3.3 V 5
Supply voltage VCC 3.15 3.3 3.45 V 5
Power-down supply current ICC_PD 1 3 mA 6
Supply current with all clocks enabled ICC_CLKS 505 590 mA All clock delays disabled, CLKoutX_Y_DIV = 1045, CLKoutX_TYPE = 1 (LVDS), PLL1 and PLL2 locked. 6
Clock input frequency (CLKin) fCLKin 0.001 500 MHz 6
Clock input slew rate SLEWCLKin 0.15 0.5 V/ns 20% to 80% 6
Clock input differential input voltage (bipolar) VIDCLKin 0.25 1.55 /V/ Figure 5 AC-coupled CLKinX_BUF_TYPE = 0 (bipolar) 6
Clock input single-ended input voltage (bipolar) VCLKin 0.25 2.4 Vpp AC-coupled to CLKinX; CLKinX* AC-coupled to ground; CLKinX_BUF_TYPE = 0 (bipolar) 7
Clock input single-ended input voltage (MOS) VCLKin 0.25 2.4 Vpp AC-coupled to CLKinX; CLKinX* AC-coupled to ground; CLKinX_BUF_TYPE = 1 (MOS) 7
Clock input high input voltage (MOS, DC-coupled) VIH 2 V DC-coupled to CLKinX; CLKinX* AC-coupled to ground; CLKinX_BUF_TYPE = 1 (MOS) 7
Clock input low input voltage VIL 0 0.4 V 7
DC offset voltage between CLKinX/CLKinX* VCLKinX-offset 55 mV Each pin AC-coupled CLKinX_BUF_TYPE = 1 (MOS) 7
Clock input frequency (FBCLKin) fFBCLKin 0.001 1000 MHz AC-coupled (CLKinX_BUF_TYPE = 0) MODE = 2 or 8; FEEDBACK_MUX = 6 7
Clock input frequency (Fin) fFin 0.001 3100 MHz AC-coupled (CLKinX_BUF_TYPE = 0) MODE = 3 or 11 7
PLL1 phase detector frequency fPD1 40 MHz 7
Charge pump sink / source mismatch (PLL1) ICPout1%MIS 3 10 % VCPout1 = VCC / 2, T = 25°C 7
PLL2 reference input frequency (OSCin) fOSCin 500 MHz 8
Input voltage for OSCin or OSCin* VOSCin 0.2 2.4 Vpp AC-coupled; single-ended (Unused pin AC-coupled to GND) 8
DC offset voltage between OSCin/OSCin* VOSCin-offset 20 mV Each pin AC-coupled 8
Doubler input frequency fdoubler_max 155 MHz EN_PLL2_REF_2X = 1; OSCin Duty Cycle 40% to 60% 8
Crystal frequency range fXTAL 6 20.5 MHz RESR < 40 Ω 8
PLL2 phase detector frequency fPD2 155 MHz 8
VCO tuning range fVCO 2370 2600 MHz LMK04816 9
Allowable temperature drift for continuous lock /ΔTCL/ 125 °C After programming R30 for lock, no changes to output configuration are permitted to ensure continuous lock 9
Default output clock frequency at device power-on fCLKout-startup 90 98 110 MHz CLKout8, LVDS, LMK04816 9
Maximum CLKoutX to CLKoutY skew (LVDS) /TSKEW/ 30 ps LVDS-to-LVDS, T = 25°C, FCLK = 800 MHz, RL= 100 Ω AC coupled 10
Maximum CLKoutX to CLKoutY skew (LVPECL) /TSKEW/ 30 ps LVPECL-to-LVPECL, T = 25°C, FCLK = 800 MHz, RL= 100 Ω, emitter resistors = 240 Ω to GND AC coupled 10
Maximum skew LVDS or LVPECL to LVCMOS MixedTSKEW 750 ps Same device, T = 25 °C, 250 MHz 10
Maximum frequency (LVDS) fCLKout 1536 MHz RL = 100 Ω 10
Differential output voltage (LVDS) VOD 250 400 450 /mV/ Figure 6 T = 25°C, DC measurement AC-coupled to receiver input R = 100-Ω differential termination 10
Differential output voltage swing (LVDS) VSS 500 800 900 mVpp 10
Change in magnitude of VOD for complementary output states ΔVOD -50 50 mV 10
Output offset voltage (LVDS) VOS 1.125 1.25 1.375 V 10
Change in VOS for complementary output states ΔVOS 35 /mV/ 10
Output rise time (LVDS) TR 200 ps 20% to 80%, RL = 100 Ω 10
Output short-circuit current - single-ended ISA -24 24 mA Single-ended output shorted to GND, T = 25°C 10
Output short-circuit current - differential ISAB -12 12 mA Complimentary outputs tied together 10
Maximum frequency (LVPECL) fCLKout 1536 MHz 10
Output voltage (2000-mVpp LVPECL) VOD 800 1070 1200 /mV/ CLKoutX_TYPE = 5; Figure 6 11
Output voltage swing (2000-mVpp LVPECL) VSS 1600 2140 2400 mVpp CLKoutX_TYPE = 5 11
Maximum frequency (LVCMOS) fCLKout 250 MHz 5-pF Load 11
Output duty cycle (LVCMOS) DUTYCLK 45 50 55 % VCC / 2 to VCC / 2, FCLK = 100 MHz, T = 25°C 11
Output rise time (LVCMOS) TR 400 ps 20% to 80%, RL = 50 Ω, CL = 5 pF 11
Low-level output voltage (digital outputs) VOL 0.4 V IOL = 500 µA 11
High-level input voltage (CLKuWire, DATAuWire, LEuWire) VIH 1.6 V 12
Low-level input voltage (CLKuWire, DATAuWire, LEuWire) VIL 0.4 V 12
High-level input current (CLKuWire, DATAuWire, LEuWire) IIH 5 25 µA VIH = VCC 12
Thermal resistance, junction-to-ambient (natural convection, JESD51-7 High-K board) RθJA 24.3 °C/W 6
Thermal resistance, junction-to-case (top) RθJC(top) 6.1 °C/W 6
Thermal resistance, junction-to-board RθJB 3.5 °C/W 6
Junction-to-top characterization parameter ψJT 0.1 °C/W 6
Junction-to-board characterization parameter ψJB 3.5 °C/W 6
Thermal resistance, junction-to-case (bottom) RθJC(bot) 0.7 °C/W 6

CAD (KiCad official)

  • Symbol: LMK04816BISQX
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: WQFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: lmk04816bisqx-etched.step / lmk04816bisqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk04816bisqx.step / lmk04816bisqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (130 pp, sha256 22a4ac170155c19e, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF